• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.324-327
• /
• 2015

Scaffold is the most commonly used equipment in various types of construction works. Since various types of construction works use the same scaffold equipment, it becomes more difficult to be controlled and managed, thus resulting hazard frequently. According to the information announced in July 2012 by Council of Labor Affairs Executive Yan, the site collapse or incomplete anti-falling protection has led the site to accident frequently, and this is the main reason that causes construction industry occupational disasters. The labor death occupational hazard ratio rises up to 13% in scaffold activity, and the Council of Labor Affairs Executive Yan has showed that the death ratio is higher when using the scaffold in construction site, the total number of death has reached to 139 from 2005 to 2010. In order to ensure the safety of scaffold user, this study tends to build a wireless sensor monitoring system to detect the reliability and safety of the scaffold. The wireless sensor technique applies in this study is different with the traditional monitoring technique which is limited with wired monitoring. Wireless sensor technique does not need wire, it just needs to consider the power supply for establishing the network and receiving stable information, and it can become a monitoring system. In addition, this study also integrates strain gauge technique in this scaffold monitoring system, to develop a real-time monitoring data transfer mechanism and replace the traditional wired single project monitoring equipment. This study hopes to build a scaffold collapse monitoring system to effectively monitor the safety of the scaffold as well as provide the timesaving installation, low-cost and portable features.

• 건축역사연구
• /
• 제16권3호
• /
• pp.57-74
• /
• 2007

Jeoksimto which was build up as the reinforcement establishment made with the soil under the cornerstone in the site of tile-capped building is the representative construction technique which become popular in the Sabi capital era after the Wungjin capital era. Especially from the fact that no site of tile-capped building with this Jeoksimto has been found in the Silla area, we can see the originality Baekje technique. We can analogize the specialization of Josagong (造寺工) (craftsman building the temple) and the diversity of technique, on the basis of the technique raising the ground level which is different with the middle gate site of Neung-sa and the Hall enshrining Buddha site in Buyeo. Moreover, we can have the confidence the dispatch of craftsman and the transmission of building technique from the Buyeo area to the Iksan area through the fact that the construction techniques of Jeoksimto in both area are almost the same. However the concerns in the construction archaeology are necessary because almost no study for Jeoksimto has been conducted and the term of Jeoksimto also is unfamiliar even if excavation of Baekje Jeoksimto in the several remains.

• 한국정밀공학회지
• /
• 제17권9호
• /
• pp.189-195
• /
• 2000

RP techniques have their unique characteristics according to the working principles : star-stepped surface of parts due to layer-by-layer stacking low build speed caused by line-by-line solidification to fish one layer and post processing to improve surface finish etc The objective of this study is to propose a new RP technique Variable Deposition Mnanufacturing (VDM) which can make up for the disadvantages of the existing RP techniques and to develop an apparatus to implement the technique. The proposed process can greatly reduce the build time and improve the surface finish of parts generated. Experiments are carried out to obtain the range of temperature of molten material to maintain its fluidity and to investigate the effect of gas cooling on the preservation of the slopes. Some simple shapes such as a line-shape an S-shape and a circle-shape are fabricated from Ethylene Vinyl Acetatecopolymer(EVA) In order to examine the applicability of VDM to more general shapes a tensile specimen and a yo-yo shape were manufactured by the proposed RP method using EVA material as a trial approach. The current basic study shows a high potential of practical use of the proposed VDM process to prototyping of a general three-dimensional shape.

• 한국조경학회지
• /
• 제23권4호
• /
• pp.97-110
• /
• 1996

This study is about the application of visual structure and presentation of film as one of new methods for design of sequential landscape. The primary objective of the study is to present the basis of applicable and reasonable D니. In applying components of film to DSL, if it is compared with sequential landscape, the film is collection of shots while sequential landscape is accumulation of sceneries. Film and sequential landscape give us a whole meaning different from the meaning itself of a shot or scenery in its experience. The study build a tentative technique of DSL which has the following stages : 1) Goal setting and making out a scenario 2) Analysis and investigation 3) Selection process of definite form 4) Drawing up conti., sketch and notes, It is expected that the technique presented in this study could be a basis for further study of DSL.

• 기술사
• /
• 제33권2호
• /
• pp.62-67
• /
• 2000

The trouble rank of business management of the small-medium manufacturing enterprises in Korea is constituted by that average 28.6% of production management in the worst trouble of business management from 1982 to 1999. The status of production management approaching problem is analyzed for Korean small-medium manufacturing enterprises and it us checked productivity improvement and requirement facts impede productivity improvement. It is expected to contribute much productivity improvement through a new established model of production management system and technique or tool for small-medium manufacturing enterprises in Korea.

• Food Science and Biotechnology
• /
• 제18권5호
• /
• pp.1199-1203
• /
• 2009

Melamine is a chemical intermediate to manufacture amino resins and plastics, which cannot be used as food additive since it can cause kidney stones. A qualitative determination method of melamine residue in powdered and liquid milk was developed using Fourier transform infrared (FTIR) spectroscopic technique. The calibration sets consisted of 21 standard melamine solutions, in which 1% trichloroacetic acid aqueous solution and acetonitrile (3:1, v/v) were used as solvent. The model was validated using 10 standard melamine solutions which were unused to build up the calibration set. Infrared (IR) absorbance peaks specific to almost all chemical groups in melamine molecule were shown in the spectral range between 1,100 and 1,800/cm. Combined partial least squares (PLS)-$2^{nd}$ derivative calibration model coupled with mean centering (MC) mathematical enhancement showed the highest correlation coefficients ($R^2$>0.99). In brief, the FTIR technique can be used for quantitative analysis of melamine in milk samples.

• 한국화재소방학회논문지
• /
• 제15권4호
• /
• pp.1-9
• /
• 2001

The purpose of this study is to set up disaster prevention plan and risk assessment system considering combustion velocity at traditional housing zone. The combustion velocity analysis could contribute to build in disaster prevention technique through the potential risk analysis of the area, such analysis also able to set up comprehensive disaster prevention management system. Following results have achieved through the combustion velocity calculation. \circled1 The combustion velocity was calculated in order of the below winds, the above winds and the side winds. \circled2 It must be careful to set up disaster prevention plan in case of the below winds. \circled3 The combustion velocity was calculated at the density Bone where neighboring Distance and Length was small. \circled4 It proved that factors of each parameter not mostly effect to analyse the combustion velocity in limit of the 30 minutes after ignition. \circled5 At the density zone where Distance and Length is small the duration of transfer to neighboring house takes up to 4 minutes, it is required to set up of emergency response plan to minimize the fire dispersion.

• Smart Structures and Systems
• /
• 제20권4호
• /
• pp.473-481
• /
• 2017

This study suggests a simple, convenient and non-destructive method for investigation of the Young's modulus detection in stepped shafts which only utilizes the first-order resonant frequency in flexural mode and dimensions of structures. The method is based on the impulse excitation technique (IET) to pick up the fundamental resonant frequencies. The standard Young's modulus detection formulas for rectangular and circular cross-sections are well investigated in literatures. However, the Young's modulus of stepped shafts can not be directly detected using the formula for a beam with rectangular or circular cross-section. A response surface method (RSM) is introduced to design numerical simulation experiments to build up experimental formula to detect Young's modulus of stepped shafts. The numerical simulation performed by finite element method (FEM) to obtain enough simulation data for RSM analysis. After analysis and calculation, the relationship of flexural resonant frequencies, dimensions of stepped shafts and Young's modulus is obtained. Numerical simulations and experimental investigations show that the IET method can be used to investigate Young's modulus in stepped shafts, and the FEM simulation and RSM based IET formula proposed in this paper is applicable to calculate the Young's modulus in stepped shaft. The method can be further developed to detect mechanical parameters of more complicated structures using the combination of FEM simulation and RSM.

• Restorative Dentistry and Endodontics
• /
• 제44권3호
• /
• pp.27.1-27.12
• /
• 2019

This case report describes a technique in which endodontic treatment and permanent indirect restoration were completed in the same clinical appointment with the aid of a computer-aided design/computer-aided manufacturing (CAD/CAM) system. Two patients were diagnosed with irreversible pulpitis of the mandibular first molar. After access preparation, root canals were located, irrigation was performed until bleeding ceased, and the coronal tooth structure was prepared for indirect restoration. Then, utilizing an interim 3-mm build-up of the endodontic access cavity, a hemi-arch digital scan was performed with an intraoral scanner. Subsequent to digital scanning, restoration design was performed simultaneously with the endodontic procedure. The root canals were shaped using the Race system under irrigation with 2.5% sodium hypochlorite followed by root canal filling. The pulp chamber was subsequently filled with a 3-mm-thick composite resin restoration mimicking the interim build-up previously utilized to facilitate block milling in the CAD/CAM system. Clinical try-in of the permanent onlay restoration was followed by acid etching, application of a 5th generation adhesive, and cementation of the indirect restoration. Once the restoration was cemented, rubber dam isolation was removed, followed by occlusal adjustment and polishing. After 2 years of follow-up, the restorations were esthetically and functionally satisfactory, without complications.

• 구강회복응용과학지
• /
• 제25권3호
• /
• pp.225-235
• /
• 2009

최근 심미 치과 수복이 발달하게 되면서 치은 연상 변연을 가진 전부 도재 수복물을 하게 되는 경우 섬유 강화 포스트는 자연치와 유사한 반투명성을 보여 더욱 심미적으로 보이게 해준다. 섬유 강화 포스트인 석영 섬유 포스트와 유리 섬유 포스트로 수복시 코어 축성 방법을 달리한 5가지 군으로 분류하여 각 방법에 따른 파절강도를 비교하였다. 발치된 45개의 치아를 사용하여 모두 근관치료를 시행하고 CEJ 상방 1mm 부위에서 치축에 수직이 되도록 주수하에 치관부를 절삭하였다. A, B, C군은 #1 D.T. $Light-post^{(R)}$를 사용하였고, D, E군은 #1.5 $LuxaPost^{(R)}$를 사용하였다. A군은 제조사의 지시대로 D.T. $Light-post^{(R)}$와 시멘트로는 $DUO-LINK^{TM}$을 코어로는 $LIGHT-CORE^{TM}$을 사용하였다. B군은 시멘트와 코어로 $DUO-LINK^{TM}$을 포스트 접착 후 코어를 축성하는 이 단계 방법을 사용하였고, C군은 시멘트와 코어로 $DUO-LINK^{TM}$를 사용하면서 포스트 접착과 코어 축성을 동시에 시행하는 일단계 방법을 사용하였다. D군은 시멘트와 코어로 $LuxaCore^{(R)}-Dual$을 이단계 방법으로 축성하고, E군은 일단계 방법으로 축성하였다. ferrule 0mm로 치관을 삭제하여 금속관으로 수복 후 $45^{\circ}$로 기울여 CEJ 하방 2mm 까지 매몰 후 crosshead speed 1mm/min로 파절 강도를 측정하였다. 파절강도는 A, B, D, E, C군 순으로 작은 값을 나타냈으며 통계적 유의성은 없었다. B군에서만 치근 파절이 나타났으며 모두 재수복이 불가능한 파절이었다. 파절 양상은 모든 군에서 코어/치근 파절이 절반 이상 나타났으며, B와 D군에서는 대부분 재수복이 불가능한 파절이었다. 실험에서 나타난 결과로 미루어 섬유 강화 포스트나 코어의 종류 그리고 코어 축성 방법이 치아 파절 강도와는 큰 연관성이 없는 것으로 보인다. 파절 양상을 보면 섬유 강화 포스트를 사용했음에도 불구하고 재수복이 불가능한 경우가 절반 이상 나타났으며, 이단계 방법으로 코어를 축성한 군에서 그 수가 더 많은 것으로 보아 일단계 방법으로 코어를 축성하는 것이 재수복의 가능성을 고려해 볼 때 임상적으로 사용 가능한 효율적인 방법이라고 사료된다.