• 대한치과교정학회지
• /
• 제5권1호
• /
• pp.21-24
• /
• 1975

The purpose of this study was to investigate the effect of sinc phosphate cement on the enamel surface of extracted teeth. The tooth was placed in a test tube, which was subjected to 5ml of 0.2M acetate buffer at pH 4 by 'window technique.' The calcium content of the acetate buffer was determined by the Perkin-Elmer Model 303 Atomic Absorption Spectrophotometer. The obtained results were summarized in the following. 1. The solubility of enamel is $0.92mg/cm^2$. ml in control group. 2. The solubility of enamel is increased by treating these with zinc phosphate cements. 3. The solubility of enamel is $0.69mg/cm^2$. ml by treating with Lee Smith cement. 4. The solubility of enamel is $0.30mg/cm^2$. ml by treating with G-C's cement.

• 한국광물학회지
• /
• 제15권2호
• /
• pp.114-121
• /
• 2002

제주도 안디졸(Andisol) 토양 분포지역 중 화산성 쇄설물과 현무암으로부터 기원된 두 토양의 Bo층을 대상으로 완충능력을 계산하고 토양의 알루미늄 용해도가 완충능력에 미치는 영향을 연구하였다. 주상실험 결과는 pH 6.0과 4.0 부근에서 완충작용이 일어남을 보여 주며, 현무암기원의 토양보다 화산쇄설암기원 토양의 완충능력이 더 큰 것으로 나타났다. 다양한 pH조건에서의 배치평형실험 결과 다량의 알루미늄 함유 광물상을 갖는 제주도 안디졸 토양 Bo층에서의 알루미늄 거동은 $Al(OH)_3$, 이모골라이트 혹은 프로토-이모골라이트 등의 고상에 주로 영향을 받는 것으로 나타났다. Bo층 토양의 광물조성, 배치 평형실험결과, 그리고 주상실험 결과를 종합해 볼 때, pH 4.0 부근에서 나타나는 뚜렷한 완충능력($\beta$)은 깁사이트 및 프로토-이모골라이트의 용해도 특성에 의해서 좌우되는 것으로 해석된다. pH 6.0 내외의 완충작용은 규산염광물의 용해도 및 염기성양이온의 양이온교환반응에 의해 진행되고 있으나, 낮은 염기성 포화도는 토양산성화가 더 진행될 경우 이러한 완충효과가 오래 지속되지 못할 것임을 지시한다.

• Journal of Pharmaceutical Investigation
• /
• 제16권2호
• /
• pp.43-54
• /
• 1986

To increase the bioavailability of clonixin, clonixin argininate was prepared and compared with clonixin by determining solubility, pKa, lipid-water partition coefficient, dissolution rate and in vivo tests. The results are summerized as followings; 1) The solubility of clonixin argininate was increased by 20 times in water, about 1.2 times in pH 1.2 and pH 8.0 buffer solution, and about 1.8 times in pH 6.8 buffer solution compared with that of clonixin. 2) pKa values of clonixin, clonixin lysinate and clonixin argininate were 6.32, 7.20 and 7.45, respectively. 3) The lipid-water partition coefficient of clonixin argininate was increased more than that of the clonixin in n-hexane, carbon tetrachloride, chloroform, methylene chloride, and n-butanol, but the partition coefficient of clonixin was increased more than that of clonixin argininate in benzene/pH 1.2 buffer solution, ether/pH 8.0 buffer solution, and 3-methylbutyl acetate/pH 1.2, pH 8.0 buffer solution. 4) The time required to dissolve 60% $(T_{60%},\;min.)$ of clonixin argininate was about 1.5 min. in water and pH 1.2 buffer solution, and about 5 min. in pH 6.8 buffer solution. $T_{60%}$ of clonixin lysinate was about 1.5 min. in water, about 1.8 min. in pH 6.8 buffer solution, and about 8 min. in pH 1.2 buffer solution. But $T_{60%}$ of clonixin was about 96 min. in pH 6.8 buffer solution, over 2 hours in water and pH 1.2 buffer solution. 5) Anti-inflammatory effect of clonixin argininate was increased more than that of clonixin over 6 hours, and that of clonixin lysinate was followed by lapse of time. 6) Analgesic effect of clonixin argininate was increased by 1.5 times more than that of clonixin and the effect of clonixin argininate was nearly identical with that of clonixin lysinate. 7) The absorption rates (Ka) of clonixin, clonixin lysinate and clonixin argininate were $0.169\;hr^{-1},\;0.652\;hr^{-1}$ and $0.723\;hr^{-1}$ in situ, respectively.

• Archives of Pharmacal Research
• /
• 제20권6호
• /
• pp.560-565
• /
• 1997

The physicochemical properties of melatonin (MT) in propylene glycol (PG) and 2-hydroxypropyl-.betha.-cyclodextrin $(2-HP{\beta}CD)$ vehicles were characterized. MT was endothermally decomposed as determined by differential scanning calorimetry (DSC). Melting point and heat of fusion obtained were $116.9{\pm}0.24^{\circ}C $.and $7249{\pm}217 cal/mol$., respectively. MT as received from a manufacture was very pure, at least 99.9%. The solubility of MT in PG solution increased slowly until reaching 40% PG and then steeply increased. Solubility of MT increased linearly as concentration of $2-HP{\beta}CD$ without PG INCREASED$(R^2=0.993)$. MT solubility in the mixtures of pg and $2-HP{\beta}CD$ also increased linearly but was less than the sum of its solubility in $2-HP{\beta}CD$ and PG individually. The MT solubility was low in water, simulated gastric or intestinal fluid but the highest in the mixture of PG(40v/v%) and $2-HP{\beta}CD$ (30w/v%) although efficiency of MT solubilization in $2-HP{\beta}CD$ decreased as the concentration of PG increased. MT was degraded in a fashion of the first order kinetics $(r^2>0.90)$. MT was unstable in strong acidic solution (HCl-NaCl buffer, pH 1.4) but relatively stable in other pH values of 4-10 at $70^{\circ}C$. In HCl-NaCl buffer, MT in 10% PG was more quickly degraded and then slowed dpwm at a higher concentration. However, the degradation rate constant of MT in 2-HP.betha.CD was not changed significantly when compared to the water. The current studies can be applied to the dosage formulations for the purpose of enhancing percutaneous absorption or bioavailability of MT.

• Bulletin of the Korean Chemical Society
• /
• 제32권5호
• /
• pp.1640-1644
• /
• 2011

Water-soluble mutant of intrinsically insoluble protein, crambin, was produced by mutagenesis based on the sequence analysis with homologous proteins. Thr1, Phe13, and Lys33 of crambin were substituted for Lys, Tyr, and Lys, respectively. The resultant mutant was soluble in aqueous buffer as well as in dodecylphosphocholine (DPC) micelle solution. The $^1H-^{15}N$ spectrum of the mutant crambin showed spectral similarity to that of the wild-type protein except for local regions proximal to the sites of mutation. Solution structure of water-soluble mutant crambin was determined in aqueous buffer by NMR spectroscopy. The structure was almost identical to the wild-type structure determined in non-aqueous solvent. Subtle difference in structure was very local and related to the change of the intra- and inter-protein hydrophobic interaction of crambin. The structural details for the enhanced solubility of crambin in aqueous solvent by the mutation were provided and discussed.

• 한국산업보건학회지
• /
• 제30권2호
• /
• pp.87-98
• /
• 2020

Objective: The purpose of this study was to propose a sequential procedure for the simultaneous analysis of soluble and insoluble metal compounds. Methods: Methods for sampling and analyzing metal compounds such as ISO standards, NIOSH methods, HSE methods, and OSHA methods were reviewed. Results: Some metals have different OELs depending on the solubility of the compound. Therefore, we should take into account these characteristics and perform an exposure assessment. Soluble metal compounds are first extracted from the filter, and then the filter is digested by acids to analyze residual insoluble components. The extraction of soluble compounds can be completed by agitation for about 60 minutes with a leach solution (water) in a water bath at 37℃. For the analysis of insoluble compounds, the sample filter and the filtration filter remaining after the extraction of the soluble compounds are analyzed. This allows simultaneous determination of soluble and insoluble metal compounds. For hexavalent chromium compounds, soluble hexavalent chromium can first be extracted from the filter by using sulfate buffer. The insoluble hexavalent chromium remaining in the filter can then be extracted using carbonate buffer. Conclusion: Workers are often exposed to many hazardous substances with different exposure limits at industrial sites. The OELs for compounds of the same metal can be set differently depending on solubility. This study can help evaluate a worker's exposure to metal compounds by suggesting methods for the simultaneous determination of soluble and insoluble metal compounds.

• Journal of Microbiology and Biotechnology
• /
• 제17권1호
• /
• pp.89-95
• /
• 2007

Improvements in the dissolution of proteins in two-dimensional gel electrophoresis have greatly advanced the ability to analyze the proteomes of microorganisms under a wide variety of physiological conditions. This study examined the effect of various combinations of chaotropic agents, a reducing agent, and a detergent on the dissolution of the Streptomyces peucetius cytosolic proteins. The use of urea alone in a rehydration buffer as a chaotropic agent gave the proteome a higher solubility than any of the urea and thiourea combinations, and produced the highest resolution and clearest background in two-dimensional gel electrophoresis. Two % CHAPS, as a detergent in a rehydration buffer, improved the protein solubility. After examining the effect of several concentrations of reducing agent, 50 mM DTT in a rehydration buffer was found to be an optimal condition for the proteome analysis of Streptomyces. Using this optimized buffer condition, more than 2,000 distinct and differentially expressed soluble proteins could be resolved using two-dimensional gel electrophoresis with a pI ranging from 4-7. Under this optimized condition, 15 novel small proteins with low-level expression, which could not be analyzed under the non-optimized conditions, were identified. Overall, the optimized condition helped produce a better reference gel for Streptomyces peucetius.

• Journal of Nutrition and Health
• /
• 제30권1호
• /
• pp.40-47
• /
• 1997

Dietary peptides have recently received attention regarding their beneficial effects on nutrient metabolism since the caseinphosphoptides obtained from casein hydrolysate are generally believed to enhance the intestinal absorption of Ca. The two experiments were conducted to investigate the effects of various hydrolyzed fractions of gluten on Ca bioavailability. The gluten hydrolysate of dietary components was produced by enzymatic hydrolysis of gluten whereas gluten hydrolysate supernationt and its precipiate resulted from centrifugation. In experiment I, the rats were for 4 weeks fed the 4 kinds of diets containing same amount of nitrogen and calories and diffeing only in the forms of nitrogen sources. The diets were gluten (G), gluten hydrolysat(GH), gluten hydrolysate supernatant(GHS) and gluten hydrolysate precipitatie(GHP). Determination was made for the body weight gain, serum Ca concentration, Ca solubility in small intestinal contents, bone weight, length and stength, bone ash and Ca content, and Ca balance, respectively. No significant difference was noticed as regards growth, serum Ca, and bone dimension and Ca content among rat groups. More significant increase was observed with regard to Ca absorption and intestinal solubility in the rats receiving the GH or GHS diet which containe crude gluten peptides, than in those subjected to G or GHP diet. In experiment II, in vitro determination for Ca solubility was made to ascertain the mechanism responsible for the effects of gluten peptides on Ca absorption. The 10mM Ca in potassium phosphate buffer solution(pH 7.0) incubated for 3 hours at 37$^{\circ}C$ by the GHS fraction, was observed to be capable of increasing the Ca solubility at 5-25mg/ml concentration of gluten peptides. These observations suggest that the gluten peptides from gluten hydrolysate may enhance the Ca absorption efficiency by increasing the solubility of Ca in small intestine.

• 한국초지조사료학회지
• /
• 제32권1호
• /
• pp.59-74
• /
• 2012

본 시험에서 건초(티머시, 알팔파 및 클라인)와 짚류(톨페스큐 및 볏짚)의 buffer 용해도와 단백질 분획이 실시되었으며, 조사료 자원의 buffer 추출이 $In$ $vitro$ 발효 성상, 분해율 및 가스($CO_2$ 및 $CH_4$) 생성량에 미치는 효과를 조사하였다. 다른 조사료에 비해 총 단백질 중 buffer 가용성 조단백질과 A fraction은 알팔파 건초에서 각각 61% 및 41.77%로 가장 높았으며 볏짚에서 가장 낮았다(각각 42.8% 및 19.78%). 총단백질 중 B1 fraction은 조사된 조사료간 비교적 큰 차이를 보이지 않았으나 B2 fraction에서는 다른 조사료(6.34~8.85%)에 비하여 톨페스큐짚(10.05%) 및 클라인 건초(12.34)%에서 다소 높은 수준을 보였다. 총 단백질 중 B3 fraction이 차지하는 비율은 톨페스큐짚에서 38.49%로 가장 높았으나 다른 조사료 자원 간에는 큰 차이가 없었으며, C fraction의 경우 볏짚에서 가장 높은 비율(15.05%)을 보였다. 모든 사료에서 배양 개시 후 3시간(P<0.01) 및 6시간(P<0.05)에서 buffer 추출 전에 비해 추출 후 배양액의 pH가 증가되었으며, 배양 6시간(P<0.05) 및 12시간(P<0.001)에서 다른 사료에 비해 티모시 건초 및 알팔파 건초로부터의 pH가 낮았다. 배양액의 암모니아 농도는 모든 배양시간에서 가용성 물질의 추출 전 후에 다른조사료에 비해 알팔파 건초에서 가장 높았으나 모든 사료의 추출효과는 배양 3시간(P<0.01)에서만 나타났다. 배양액의 총 VFA 농도는 배양 24시간까지 알팔파 건초에서 가장 높았던 반면 톨페스큐짚과 볏짚에서 가장 낮았다. 또한 모든 조사료에서 buffer 추출 전에 비하여 추출후에 총 VFA 농도가 감소되었다(P<0.01~P<0.001). Acetic acid ($C_2$)의 조성 비율에서는 배양 6시간까지 추출 전에 더 높았으나(P<0.001) 사료 간 차이는 없었다. Propionic acid ($C_3$) 조성 비율 역시 배양 개시 후 3, 24 및 48시간(P<0.001)에서 추출 전에 더 높았으며, 6 및 12 시간의 배양액에서 대부분 건초(티모시, 알팔파 및 클라인)와 짚류(톨페스큐짚 및 볏짚) 간 차이가 있는 것으로 조사되었다(P<0.05). 그러나 butyric acid ($C_4$) 조성비율의 경우 대부분의 배양시간에서 사료 간 차이는 없었다. 건물에서의 분해율 관련 parameter 중 a 값은 조사된 전체 조사료에서 buffer 추출 전이 추출 후에 비해서 높았으며(P<0.001), 다른 조사료에 비해 톨페스큐짚과 볏짚에서 크게 낮았다(P<0.05). 또한 b 값의 경우 역시 추출 전에 비해 추출 후에서 현저히 낮았으나(P<0.001) 사료 간 차이는 없었다. 볏짚을 제외한 조사료에서 추출 후에 비해 추출 전의 건물 유효분해율(EDDM)이 더 높았다(P<0.001). 조단백질에서의 a, b 및 c 값은 추출 전에 비해 추출 후에서 현저히 낮았으나(P<0.05) 사료 간 차이는 없었다. 조단백질 유효분해율(EDCP)에서는 다른 조사료 종류에 비해 톨페스큐짚과 볏짚에서 낮았다(P<0.05). 한편, NDF의 경우 a 값과 b 값(P<0.01) 및 NDF 유효분해율(EDNDF, P<0.001)은 추출 후에 비해 추출 전에 더 높았으나(P<0.01) 사료 간 차이는 보이지 않았다. 반추위미생물에 의해 사료분해과정 중 생성되는 $CO_2$ 량도 24시간 배양까지는 추출 전에 더 많았으며(P<0.05~P<0.001), 톨페스큐짚과 볏짚에 비해 건초 형태의 조사료로부터의 $CO_2$ 생성량이 더 많았다(P<0.05~P<0.01). 메탄가스($CH_4$) 생성량 역시 모든 배양시간에서 추출 전에 비해 추출 후에 크게 감소되었으며(P<0.01~P<0.001), 12~24시간을 제외하고는 짚류에 비해 건초에서 현저히 높은(P<0.05) 것으로 나타났다. 본 시험의 결과를 종합하면, 조사료 자원에 대한 buffer 용해도와 단백질의 분획이 $In$ $vitro$ VFA 농도와 분해율 및 gas ($CO_2$ 및 $CH_4$) 발생량 간 상호 밀접한 관계를 보이는 것으로 여겨진다. 이에 따라 조사료 이용 효율 개선을 위해 조사료자원에 대한 buffer 용해도와 단백질 분획을 반추동물 TMR 조제에 활용할 필요가 있는 것으로 여겨진다.

• Food Science and Biotechnology
• /
• 제16권1호
• /
• pp.49-54
• /
• 2007

The effects of hydrostatic pressure (HP) treatment on the physicochemical, morphological, and textural properties of bovine semitendinosus (ST) muscle were assessed. Based on SDS-PAGE, the decrease in HP-treated ST muscle protein solubility in 0.1 M KCl buffer (pH 7.0) was attributable to a reduction in the levels of sarcoplasmic protein, and the protein solubility decrease observed in 0.6 M KCl buffer (PH 7.0) was attributable to a reduction in the levels of myosin heavy-chain and actin. Scanning electron microscope (SEM) observations showed that muscle fibers became finer and more compact with increasing pressures. The shear force and hardness of ST muscle pressurized to 300 MPa decreased significantly (p<0.05), however samples pressurized at 100 and 500 MPa exhibited a significant increase in both attributes relative to the control sample (p<0.05).