• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.1183-1187
• /
• 1993

The objective of this study is to design a fuzzy logic controller(FLC) which controls the position of excavator's attachment a noble FLC is proposed, which is based on simple control rules while offering easy tuning of control parameters by utilizing real operation characteristics of an operator. The proposed FLC consists of two parts, the proportional controller part and the FLC part. Experiments are carried out on a test bed which is built around a commercial excavator. The controller is applied to bhe leveling of excavator's bucket tip, which is one of the main functions in an excavator's operation.

• 수산해양기술연구
• /
• 제43권2호
• /
• pp.140-148
• /
• 2007

This paper describes on the real-time monitoring of dredging information for grab bucket dredger equipped with winch control sensors and differential global positioning system(DGPS) using electronic chart display and information system(ECDIS). The experiment was carried out at Gwangyang Hang and Gangwon-do Oho-ri on board M/V Kunwoong G-16. ECDIS system monitors consecutively the dredging's position, heading and shooting point of grab bucket in real-time through 3 DGPS attached to the top bridge of the dredger and crane frame. Dredging depth was measured by 2 up/down counter fitted with crane winch of the dredger. The depth and area of dredging in each shooting point of grab bucket are displayed in color band. The efficiency of its operation can be ensured by adjusting the tidal data in real-time and displaying the depth of dredging on the ECDIS monitor. The reliance for verification of dredging operation as well as supervision of dredging process was greatly enhanced by providing three-dimensional map with variation of dredging depth in real time. The results will contribute to establishing the system which can monitor and record the whole dredging operations in real-time as well as verify the result of dredging quantitatively.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.537-543
• /
• 2003

This paper presents the improved procedure to assess static and dynamic strength of crawler type excavators. A fully integrated model including front attachment and chassis was prepared for structural analysis. In this paper, two types of loading input methods were investigated and the method imposing digging force directly on bucket tooth was more convenient than imposing cylinder reaction force on cylinder pin even if the two methods showed no discrepancy in analysis results. Static strength analysis was carried out for eight analysis scenarios based on two extreme digging positions, maximum digging reach position and maximum digging force positions. The results from static strength analysis were compared with measured stresses, cylinder pressures and digging forces and showed a good quantitative agreement with measured data. Dynamic strength analysis was carried out for simple reciprocation of boom cylinders. It was recognized that the effect of compressive stiffness of hydraulic oil was very important for dynamic structural behavior. The results from dynamic strength analysis including hydraulic oil stiffness were also compared with measured acceleration data and showed a qualitative agreement with measured data.

• 한국산업융합학회 논문집
• /
• 제25권1호
• /
• pp.87-99
• /
• 2022

We propoes a study on the dynamic characteristics analysis and position control of 5-degree multi-joint manipulators for untact remote working at construction sites and manufacturing plants. The main frame of freedom multi-joint manipulator consists of five elements, boom cylinder, boom cylinder, arm cylinder, bucket cylinder, and rotation joint and link. In addition, the main purpose of the proposed system is to realize the work of the manufacturing process or construction site by remote control. Motion control of the entire system is a servo valve control method by hydraulic servo cylinders for one to four joints, and a servo motor control method is applied for five joints. The reliability of the proposed method was verified through performance experiments by computer simulation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.473-478
• /
• 2003

This paper presents static and dynamic measurement of the stress and motion characteristics for crawler type excavators. Eight scenarios were prepared for static measurement based on two extreme digging positions, maximum digging reach position and maximum digging force position. The measured items for static motion included stress, cylinder pressure, cylinder stroke and digging force. The measured static stresses showed that asymmetric digging force acting on a bucket induced higher stress level than symmetric one. The measured static pressures and digging forces also agreed with design pressures and design digging forces, respectively. The dynamic measurement was performed for two types of motion, that is, simple reciprocation of each cylinder and actual digging motion. The measured items for dynamic motion were stroke and pressure of each cylinder, stresses on the working device and acceleration on the upper plate of an arm. The measured data showed that the natural frequency of the excavator highly depended on the hydraulic stiffness of cylinders. Digging motion tests revealed that digging motion was closer to static motion rather than dynamic one.

• 한국멀티미디어학회논문지
• /
• 제8권5호
• /
• pp.606-617
• /
• 2005

XML 질의 처리를 위한 XML 문서 트리내 노드들간의 구조적 관계를 효율적으로 찾는 많은 연구들이 수행되었으며 이러한 연구들의 대부분은 노드들의 위치에 기반한 영역 넘버링을 사용하고 있다 그러나 위치 기반의 노드번호 부여 방식은 동일장소에 반복적으로 노드을 삽입할 때 기존 노드번호들의 값 재조정을 필요로 한다. 본 논문에서는 가변길이 문자열을 이용한 버켓단위의 노드번호를 부여함으로써 재조정 노드수를 줄이는 ENN(Extensible Node Numbering) 방법을 제안한다. 또한 기존의 노드번호 부여 방식인 EP(extended preorder)와의 성능 비교를 실시하였다.

• 드라이브 ㆍ 컨트롤
• /
• 제17권1호
• /
• pp.37-43
• /
• 2020

An intelligent excavator can be divided into Machine Guidance (MG), semi-automatic, and unmanned by technology. The MG technology excavator is equipped with a tilt sensor on each link of the excavator and a GPS is installed on the excavator body to inform the user of the position of the excavator bucket end. Machine control (MC) technology that assists the user's work can be divided into semi-automatic and fully automatic technology. The semi-automatic MC equipment has already been commercialized by Komatsu and Caterpillar. The MC excavator is equipped with an electro-hydraulic system, sensors and controllers to control the excavator bucket end according to the user's needs. In this study, the semi-automated excavator modified based on manual excavator, is equipped with an electro-hydraulic system, a controller system, multi-sensors and a control algorithm is developed to assist in excavation work such as leveling and grading. By applying the developed technology, it was possible to confirm productivity improvement compared to manual digging and leveling work. In the future, further research to improve the accuracy of the hydraulic precision control and collaborative work with heterogeneous construction equipment such as dump truck and automated collaboration tasks technology could be developed.

• 제어로봇시스템학회논문지
• /
• 제16권4호
• /
• pp.346-352
• /
• 2010

This paper presents an intuitive interface scheme for controlling a hydraulic backhoe, which is a piece of excavating equipment consisting of a digging bucket on the end of a two-part articulated arm, and typically mounted and rotated on the back of a tractor or front loader. The passive levers/joysticks for actuator operations of a hydraulic backhoe are replaced into electric joysticks with a robotic controller, which will generate the end-effecter command trajectories of the backhoe through joystick rate control in cylindrical coordinate. The developed backhoe with the hydraulic control system showed the maxim position error of 3 cm with intuitive coordinate operations, which would be helpful for conveniently performing various excavating tasks with natural and effective ways.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2002년도 춘계 학술대회논문집
• /
• pp.94-101
• /
• 2002

The steam turbine rotor blade is designed using the Turbine Rotor Design Package developed by the authors. It can quickly accomplish blade shape design in the power plant industry. The quasi-3d code is employed for analysis of passage flow in the blade sections. Iterative change of each blade shape is made by moving position of control points in the Bezier curve under GUI(graphic user interface) environment. The full 3-D blade shape is obtained by stacking of the section blades.

• 한국항해항만학회지
• /
• 제42권3호
• /
• pp.237-244
• /
• 2018

수중에서 로봇으로 사석 고르기 작업을 실시할 경우 로봇 주위의 지형 정보를 실시간으로 제공해야 원격조종이 가능하다. 현 위치로부터 주변지형의 높낮이를 보여줘야 운전자가 작업 계획을 수립하고, 전복과 같은 사고도 예방할 수 있다. 지금까지 지형인식은 멀티 빔 소나에 의해 이뤄졌는데 이는 작업 전후의 품질을 평가하는 용도만 사용되었지 원격조종에서 필요한 실시간 정보로는 사용될 수 없었다. 본 연구는 수중 사석 고르기 작업을 위한 실시간 지형인식 방법을 개발한다. 버킷이 지면을 누를 때 전달되는 힘을 측정해 접촉여부를 판단하고, 실린더의 길이를 읽어 접촉위치를 계산한다. 버킷의 위치제어를 위해 가변 뱅뱅제어 알고리즘을 적용하고 숙련된 굴삭기 운전자의 작업패턴을 프로그램화해 지형인식, 긁기, 밀기, 전진 등의 작업을 자동으로 수행하도록 한다. 개발된 방법은 로봇 몸체로부터 버킷의 거리에 따라 3차원 격자 지형을 상대적으로 보여줌으로써 작업자가 쉽게 지형을 인식하고 지형에 따라 작업계획을 세우도록 한다.