Measurement of Static and Dynamic Stress and Motion Characteristics of Excavators

굴삭기의 정적/동적 응력 및 구동 특성 계측

  • 김규성 (현대중공업 구조연구실) ;
  • 정준모 (현대중공업 구조연구실) ;
  • 장영식 (현대중공업 구조연구실) ;
  • 최익흥 (현대중공업 구조연구실) ;
  • 이준희 (현대중공업 건설장비건장설계부)
  • Published : 2003.04.23

Abstract

This paper presents static and dynamic measurement of the stress and motion characteristics for crawler type excavators. Eight scenarios were prepared for static measurement based on two extreme digging positions, maximum digging reach position and maximum digging force position. The measured items for static motion included stress, cylinder pressure, cylinder stroke and digging force. The measured static stresses showed that asymmetric digging force acting on a bucket induced higher stress level than symmetric one. The measured static pressures and digging forces also agreed with design pressures and design digging forces, respectively. The dynamic measurement was performed for two types of motion, that is, simple reciprocation of each cylinder and actual digging motion. The measured items for dynamic motion were stroke and pressure of each cylinder, stresses on the working device and acceleration on the upper plate of an arm. The measured data showed that the natural frequency of the excavator highly depended on the hydraulic stiffness of cylinders. Digging motion tests revealed that digging motion was closer to static motion rather than dynamic one.

Keywords