• Proceedings of the Korean Society of Crop Science Conference
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.114-114
• /
• 2022

There are 28 families and 166 species of exotic weeds on agricultural land and among these, 23 families and 80 species of exotic weeds occur on pastures. Among them, the Solidago altissima is a perennial weed belonging to the asteraceae family and it is an exotic weed that spreads to the surrounding area using methods such as high seed production, vegetative propagation using underground rhizomes and allelochemical. Accordingly, in 2009, the Ministry of Environment designated it as an ecosystem-disrupting species. This study was conducted to obtain basic data about the effects of S.altissima derived allelochemicals on forage crops. The root of S.altissima was separated, dried in the shade and then pulverized to prepare an root powder. Powder was repeatedly extracted with methanol for 3 days and concentrated under reduced pressure to obtain an root methanol extract. Dissolve the extract in distilled water, dispense it in a separate-funnel and proceed with liquid-liquid extraction by adding equal amounts of n-haxane (Hex), chloroform (CHCI₃), ethyl acetate (EtoAC), and butanol (BuOH) in order of increasing polarity. A seed-bioassay was performed using fractions for each solvent, followed by separation and purification by silica gel column chromatography. As a result of the fraction germination test for each solvent, the IC₅₀ values using the fresh weight of each fraction were 898.3 mg L^-1, 676.3 mg L^-1, 1160 mg L^-1 and 1360 mg L^-1. CA, CB, and CC fractions were obtained through primary silica gel column chromatography that used CHCI₃ fraction. As a result of seed-bioassay using each fraction, the IC₅₀ values for the fresh weight of each fraction was 537.3 mg L^-1, 1280 mg L^-1 and 1947 mg L^-1. Based on this, 5 fractions were obtained as a result of secondary silica gel column chromatography using the CA fraction. A seed-bioassay was performed, as a result, the lowest IC₅₀ value was calculated as 226.7 mg L^-1 in the CAE fraction. Based on this, the fraction was analyzed by GC-MS. The results of this study can be used as basic research data on the effects of weeds on forage crops and allelochemicals secreted from S. altissima.

• Atmosphere
• /
• 제34권1호
• /
• pp.35-53
• /
• 2024

Under the leadership of the National Institute of Meteorological Sciences (NIMS), the first domestic autonomous flight-type weather modification experimental drone for fog and lower-level cloud seeding was developed in 2021. This drone is designed based on a multi-copter configuration with a maximum takeoff weight of approximately 25 kg, enabling the installation of up to four burning flares for seeding materials and facilitating weather observations (temperature, pressure, humidity, and wind) as well as aerosol (PM₁₀, PM_2.5, and PM_1.0) particle measurements. This research aims to introduce the construction of the drone and its recent applications over the past two years, providing insights into the experimental procedures, effectiveness verification, and improvement directions of the weather modification drone-based rain enhancement. In particular, partial confirmation of the experimental effects was obtained through the fog dissipation experiment on December 10, 2021, and the lower-level cloud seeding case study on October 5, 2022. To enhance the scope and rainfall amount of weather modification experiments using drones, various technological approaches, including adjustments to experimental altitude, seeding lines, seeding amount, and verification methods are necessary. Through this research, we aim to propose the development direction for weather modification drone technology, which will serve as foundational technology for practical application of domestic rain enhancement technology.

• Journal of the Korean Society of Marine Environment & Safety
• /
• 제29권7호
• /
• pp.812-818
• /
• 2023

During the years 2016 to 2020, the Ministry of Oceans and Fisheries embarked on a strategic initiative to develop a comprehensive Korean e-navigation system, which encompassed the establishment of an 'Long Term Evolution for Maritime (LTE-M).' The primary objectives were to proactively align with international navigation standards and enhance maritime safety for small vessels, particularly fishing boats. However, limitations were identified in the utilization of this network, primarily its constrained application for specific purposes. In response to these limitations, this study delves into user-centric investigations through surveys and interviews, with the goal of expanding the horizon of network utilization. User requirements emerged as the result of study, emphasizing the need for broader network applications, a wider range of target users, diverse network utilization methods, and regulatory streamlining. The user-driven insights gleaned from this study hold the potential to inform and shape future legislative measures, fostering more versatile and inclusive LTE-M network utilization for enhanced maritime safety.

• Journal of Advanced Navigation Technology
• /
• 제26권6호
• /
• pp.404-411
• /
• 2022

The main function in operating the satellite navigation system is to accurately determine the orbit of the navigation satellite and transmit it as a navigation message. In this study, we developed software to determine the orbit of a navigation satellite by combining an extended Kalman filter and an accurate dynamic model. Global positioning system (GPS) and quasi-zenith satellite system (QZSS) orbit determination was performed using international gnss system (IGS) ground station observations and user range error (URE), a key performance indicator of the navigation system, was calculated by comparison with IGS precise ephemeris. When estimating the clock error mounted on the navigation satellite, the radial orbital error and the clock error have a high inverse correlation, which cancel each other out, and the standard deviations of the URE of GPS and QZSS are small namely 1.99 m and 3.47 m, respectively. Instead of estimating the clock error of the navigation satellite, the orbit was determined by replacing the clock error of the navigation message with a modeled value, and the regional correlation with URE and the effect of the ground station arrangement were analyzed.

• Industry Promotion Research
• /
• 제8권4호
• /
• pp.147-162
• /
• 2023

This study explored the experience of social support in the education and rearing of children of immigrant women through international marriage and found its essential meaning. First of all, the husband's social support was very important, but the relationship with the husband had a different effect on childrearing and education. Parents-in-law had a positive and negative impact on child rearing and education of them due to cultural conflicts between the two countries. Their own mother was a strong support that gave them great strength just by being there, and as their children grew up, they regarded their mother as the source of bilingual education for their children. Other supporters around them were Korean friends who connected Korean society by sharing information on child care and education. Friends who spoke and communicated in their native language were emotional and psychological supporters that bonded the same experience of parenting and education for their children. In conclusion, the research participants expected a better life for themselves and their children by using a multi-layered social support system as well as a transnational family network in the process of child education and care. Accordingly, it was proposed to systematically improve the laws, systems, and policy support so that the social support system can be further strengthened at the family, community, and transnational levels for the education and care of children of immigrant women through international marriage.

• Journal of The Korean Association For Science Education
• /
• 제26권1호
• /
• pp.25-39
• /
• 2006

Most student misconceptions about evolution are similar to misconceptions and disputes which early scientists had in science history. The aim of this study was to analyze student evolution conceptions based on science history, there by revealing for effectively teaching strategies on evolution. A test was developed according to Lee's three dimensional framework (2004) on evolution concept changes. Lee's framework had been constructed according to 4 stages of evolution concept changes in history in three-dimensional aspects such as mechanism, time, and subject: before Lamarck (stage 1), Lamarck (stage 2), Darwin (stage 3), and after Darwin (stage 4). Major results were as follows. First, the evolution conceptions of students appeared fixed to stage 2 regardless of grade. Moreover, students usually possessed Lamarckian thought and did not show consistency in evolution concepts among the three dimensional aspects of mechanism, time, and subject. Therefore, students were found to apply different conceptions of evolution to each different situation.

• Journal of Navigation and Port Research
• /
• 제47권6호
• /
• pp.394-400
• /
• 2023

Unlike advancements on land, the maritime industry has been slow to embrace new technologies, primarily due to user apprehension toward unproven innovations in the development process. The existing paradigm of technology development, marked by expert-oriented and laboratory-centric test environments, often leads to a stagnation of progress at the research stage, as the applicability of the technology remains uncertain. This study departed from the conventional research system and introduced a novel methodology known as a "living lab." This approach aimed to ensure applicability by actively involving field-oriented users throughout the entire lifecycle of technology development, encompassing planning, development, verification, and evaluation. The presentation of a plan for the construction and operation of such a living lab in this study is expected to contribute to establishing an efficient experimentation system for ships that can reflect user opinions in the future and to secure technology applicability in the maritime field.

• Journal of the Korean Society of Radiology
• /
• 제18권2호
• /
• pp.145-151
• /
• 2024

Through classes conducted using the Shift+N teaching method developed by H University for students taking major courses in radiology, the factors that influence teaching methods on learning outcomes and satisfaction with major courses were identified based on a survey of students. The analysis results were described. Compared to the existing major class method, pre-study was conducted through non-face-to-face lectures in advance and face-to-face lectures were conducted for the main class. After the lecture, related keywords corresponding to the parking lot were presented and class contents related to the keywords were applied. A possible problem was presented. In the next week, we proceeded with problem solving and explaining again the difficult or insufficient parts related to the students' review. As a result, the Shift+N teaching method showed high student participation and satisfaction due to the new class progress, which is different from the existing theory major class. Based on the results of this study, in order to efficiently deliver learning content to strengthen major competencies, we must improve existing major classes and develop teaching methods tailored to major subjects to improve students' knowledge and satisfaction through more effective and innovative teaching methods. A plan must be found.

• Journal of radiological science and technology
• /
• 제47권3호
• /
• pp.205-211
• /
• 2024

Currently, with the development of technologies, X-ray examinations for medical examinations at hospital is increasing. This study was conducted to help reduce radiation exposure by measuring the exposure dose received by pediatric patients and the spatial dose of the X-ray room. Dosimeters were installed in the eyeball, thyroid gland, breast, gonads and 4 directions at a distance of 30 cm, 40 cm, 50 cm from the phantom. The dose was measured ten times each, before, and after the application of the bismuth shield under the examination conditions of the head, chest, and abdomen of pediatric patients. Under the condition of head examination, when a shielding was applied, the dose reduction rate was 68.58% for the eyeball, 72.88% for the thyroid, 84.2% for the breast, and 72.36% for the gonad. The chest examination showed reductions of 19.56% eyeball, 56.98% thyroid, 1.21% breast, and 0.68% gonad. The abdominal examination showed reduction rates of 2.6% eyeball, 10.67% thyroid, 19.85% breast, and 82.02% gonad. Spatial dose decreased by 62.25% at 30 cm, 61.16% at 40 cm, and 68.68% at 50 cm. When the bismuth shield was applied, there was a decrease in dose across all examinations, as well as a reduction in spatial dose. Continued research on the use of bismuth shields will help radiological technologists achieve their goal of dose reduction.

• Korean Journal of Materials Research
• /
• 제34권6호
• /
• pp.291-302
• /
• 2024

In this paper, iron ore tailings (IOT) were separated from the tailings field and used to prepare cement stabilized macadam (CSM) with porous basalt aggregate. First, the basic properties of the raw materials were studied. Porous basalt was replaced by IOT at ratios of 0, 20 %, 40 %, 60 %, 80 %, and 100 % as fine aggregate to prepare CSM, and the effects of different cement dosage (4 %, 5 %, 6 %) on CSM performance were also investigated. CSM's durability and mechanical performance with ages of 7 d, 28 d, and 90 d were studied with the unconfined compression strength test, splitting tensile strength test, compressive modulus test and freeze-thaw test, respectively. The changes in Ca²⁺ content in CSM of different ages and different IOT ratios were analyzed by the ethylene diamine tetraacetic acid (EDTA) titration method, and the micro-morphology of CSM with different ages and different IOT replaced ratio were observed by scanning electron microscopy (SEM). It was found that with the same cement dosage, the strengths of the IOT-replaced CSM were weaker than that of the porous basalt aggregate at early stage, and the strength was highest at the replaced ratio of 60 %. With a cement dosage of 4 %, the unconfined compressive strength of CSM without IOT was increased by 6.78 % at ages from 28 d to 90 d, while the splitting tensile strength increased by 7.89 %. However, once the IOT replaced ratio reached 100 %, the values increased by about 76.24 % and 17.78 %, which was better than 0 % IOT. The CSM-IOT performed better than the porous basalt CSM at 90 d age. This means IOT can replace porous basalt fine aggregate as a pavement base.