• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.472-476
• /
• 2003

In this paper, a new current control algorithm is proposed for four-switch three-phase brushless DC(BLU) motor drives, which are suitable for low cost applications. A current reference generation scheme is developed and Implemented to obtain high performance characteristics in the four-switch system, such as small torque ripple and fast dynamic speed/torque response. Moreover, the proposed scheme can successful1y eliminate the torque ripple during commutations, so that it can be expected that the four-switch system can be much more practically applied for the industrial application areas.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.855_856
• /
• 2009

본 연구는 차량 주행조건에 따른 주행저항을 계산하여 각각의 출력 조건을 만족하는 전동기를 설계하였다. 또한 실험계획법의 일종인 반응표면법을 적용하여 코깅 토크를 저감시켜 전동기의 특성을 향상시켰다. 유한요소법으로 d,q축 동기 리액턴스를 산출하여 Brushless DC 전동기의 자기 포화 영역에 따른 설계의 신뢰성을 평가하였다. 마지막으로 시작품 제작을 통하여 시뮬레이션과 실험 결과를 비교하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.573-575
• /
• 1999

Brushless DC motor which has the characteristics of high efficiency and high torque, can be controlled speed by the encoder or resolver. But these sensors cost highly and have the problem that they increases the size. This paper proposes a speed control by Hall-Sensor. which is small and cheap. But this sensor has a problem of low resolution. To solve the problem this paper proposes speed control by using a least square algorithm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.490-492
• /
• 1997

This paper describes a digital sensorless drive of permanent magnet brushless DC (PM BLDC) motors. The sensorless drive adopts a digital filter - moving average finite impulse response filter for accurate estimation of commutation time. Experimental results show that the performance of the proposed sensorless drive is superior to that of the sensorless drive without filtering.

• Journal of Electrical Engineering and Technology
• /
• 제8권1호
• /
• pp.124-129
• /
• 2013

Electro-Mechanical Batteries have important advantages compared with chemical batteries, especially in Low Earth Orbit satellites applications. High speed, slotless, external rotor, brushless DC machines are proposed and used in these systems as Motor/Generator. A simplified analytic design method is given for this type of machines and, the optimization of machine in order to have maximum efficiency and minimum volume and weight are given in this paper. Particle swarm optimization (PSO) is used as the optimization algorithm and the finite element-based simulations are used to confirm the design and optimization process and show less than 6% error in parametric design.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.869-873
• /
• 2008

Optimization method for the open loop commutation time intervals in HDD spindle start-up control is presented in this paper. A hard disk drive(HDD) uses a sensorless brushless DC motor(BLDC) for the platter rotation. Because there is no direct sensor for the rotor position, open loop commutations after sensing the rotor position at a standstill using inductive sensing method are performed to speed up the rotor up to a certain speed where the zero crossings of the back electromotive force(EMF) are measurable. Therefore successful open loop commutations are necessary for the stable start-up control of the spindle motors. Random neighborhood search(RNS) algorithm is introduced as a optimization technic in this paper. Rotor speed and its standard deviation are used as a cost function and commutation intervals obtained from the spindle motion equation are used as initial parameter values for the RNS. With the help of the proposed method optimized open loop commutation time intervals for the very low start-up current are acquired and tested. The experimental results shows that the proposed method can decrease the start-up failure rate of a HDD spindle motor.

• 전력전자학회논문지
• /
• 제6권3호
• /
• pp.223-230
• /
• 2001

구형파 브러시리스 직류전동기를 구동시키기 위해서는 전동기의 회전자 위치에 대한 정보를 아는 것이 필수적이다. 본 논문에서는 회전자 위치를 검출하기 위해 일반적으로 사용되는 홀센서나 엔코더를 이용하지 않고, 각 상을 저항으로 Y결선하여 만들어지는 단자의 전압에 포함되어 있는 비여자상의 역기전력을 이용하여 전동기의 회전자 위치를 검출하는 구형파 브러시리스 직류전동기용 센서리스 드라이브 시스템을 제안한다. 이를 위해 3상 2여자 선단부 유니폴라 PWM을 수행할 결우에 대한 각상의 단자전압 분석을 수행하고, 분석된 단자전압 파형으로부터 회전자 위치를 검출하는 방법을 제안한다. 그리고 이를 실제로 간단한 회로로 구현하였다. 실험에 사용된 전동기는 100W급이며 Power MOSFET으호 인버터를 구성하였으며 87c196mc 컨트롤러를 사용하여 제어기를 구성하였다.

• 제어로봇시스템학회논문지
• /
• 제20권7호
• /
• pp.706-712
• /
• 2014

The inverters used to drive Brushless DC motors (BLDC) include switching devices such as FETs and the faults in FETs cause severe performance degradation in systems where a BLDC acts as actuator. This paper presents a fault detection and isolation method for the FETs of an inverter for BLDC motor control systems, which is based on the EKF (Extended Kalman filter). Firstly, an equivalent circuit model for a BLDC motor plus its inverter system was derived. Secondly, a state-space equation was established, where the on-resistance of the FETs is expressed as a state variable and the EKF equation estimates the on-resistance. If the estimated resistance differs greatly from the known value, it can be asserted that there is a fault on that FET. Thirdly, the local convergence of the established EKF was proved. Finally, through the experiments, the performance of the proposed method was verified. The results show that the on-resistance is estimated close to the value specified in the FET data sheet in normal operation, whereas the estimated resistance is a much larger value than the normal one in case an FET fault occurs. Therefore, it is confirmed that the proposed fault detection and isolation method works appropriately in real systems.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권8호
• /
• pp.363-368
• /
• 2006

This paper presents a new method on reducing commutation torque ripples generated in brushless dc motor drives. In such drives the current ripples are generated by motor inductance in stator windings and the back EMF. The ripples suppression techniques that are practically effective in high speed as well as in low speed regions are rarely found. The proposed method here is based on a strategy that the commutation intervals of the incoming ang the outgoing phases can be equalized by a proper PWM control. The controller is implemented by a 16-bit microprocessor and effectiveness of the proposed control method is verified through experiments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.614-616
• /
• 2000

A ferrite bonded magnet type brushless DC (BLDC) motor which do not have rotor core is analyzed by using finite element method (FEM). The magnetization distribution of the magnet does not have only parallel or radial direction. So, the direction and intensity are taken into account by the analysis of the magnetization procedure. The validity of the analysis method is verified by comparing the analyzed results with measured ones.