• Journal of Photoscience
• /
• 제4권3호
• /
• pp.121-125
• /
• 1997

The 77 K emission and excitation, and room-temperature visible spectra of cis[Cr(cyclam)Br$_2$]Br (cyclam=1,4,8,11-tetraazacyclotetradecane) are reported. The mid- and far-infrared spectra at room-temperature are also measured. The vibrational intervals of the electronic ground state are extracted from the far-infrared and emission spectra. The ten electronic bands due to spin-allowed and spin-forbidden transitions are assigned. It is found that nitrogen atoms of the cyclam ligand have strong $\sigma$-donor characters, but bromide ligand has weak $\sigma$- and $\pi$-donor properties toward chromium(III) ion. The zerophonon line in the excitation spectrum splits into two components by 172 cm$^{2-}$, and the large $^2E_g$ splitting can be reproduced by the ligand field theory.

• EDISON SW 활용 경진대회 논문집
• /
• 제4회(2015년)
• /
• pp.378-381
• /
• 2015

To produce low cost and efficient photovoltaic cells, inorganic-organic lead halide perovskite materials appear promising for most suitable solar cells owing to their high power conversion efficiency. Most recent research showes that formamidinium lead iodide ($FAPbI_3$) with methylammonium lead bromide ($MAPbBr_3$) improves the power conversion efficiency of the solar cell to more than 18 per cent under a standard illumination because incorporated $MAPbBr_3$ makes $FAPbI_3$-relatively unstable but comparatively narrow band gap-more stable composition. In respect to first principle study, we investigated band gap of $MAPbI_3$, $FAPbI_3$, $MAPbBr_3$, $(FAPbI_3)_{0.89}-(MAPbBr_3)_{0.11}$ and 0.615(eV), 0.466, 1.197, 0.518 respectively through EDISON DFT software. These results emphasize enhancing structure stability is important factor as well as finding narrow band gap.

• 대한기계학회논문집B
• /
• 제22권9호
• /
• pp.1267-1276
• /
• 1998

Falling-film evaporation experiments with aqueous lithium bromide (LiBr) solution were performed to investigate the heat transfer characteristics of enhanced copper tubes. Enhanced tubes (a knurled tube, a spirally grooved tube, and a tube coated with $20{\mu}m$ aluminum particles) and a bare tube were selected as test specimens. Averaged evaporation fluxes of water were obtained from horizontal tubes with various film Reynolds numbers, system pressures, LiBr concentrations and degrees of wall superheat. The enhanced performance of steam generation was compared between tubes with varying parameters. The knurled tube geometry showed the most excellent performance among the tubes tested. The specified enhanced tubes were more useful for generating steam on a low grade heat source such as waste heat.

• Bulletin of the Korean Chemical Society
• /
• 제20권9호
• /
• pp.1056-1060
• /
• 1999

New water soluble and highly electron deficient cobalt(II) tetrakis-(1,2,5,6-tertrafluoro-4-NN'N"-trimethyla-nilinium)-β-octabromoporphyrin [Co II (Br8TTFP)(Y)2] was synthesized and used for the electrocatalytic reduction of dioxygen. The first reduction of synthesized [Co II (Br8TTFP)(Y)2] involves one electron process to give metal centered [Co I (Br8TTFP)(Y)2]. The reduction of potential [E1/2 = -0.32 V] of [Co II (Br8TTFP)(Y)2] shifts positively 370 mV compared with that of [Co II (TTFP)(Y)2] due to the substituted bromide to β-pyrrole positions. The electrochemically reduced [Co I (Br8TTFP)(Y)2] binds dioxygen and catalytically reduces it to HOOH by 2e - transfer. Cyclic and hydrodynamic voltammetry at a glassy carbon electrode in dioxygen-saturated aqueous solutions are used to study the electrocatalytic pathway.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권6호
• /
• pp.714-720
• /
• 2003

Due to the electric power shortage in summer season and regulation of freon refrigerant, the application of gas absorption refrigeration and hot water systems are considerably increasing trend. But, this system consists of condenser, heat exchanger, supply pipe and radiator etc. which are easily corroded by acidity and dissolved oxygen and gases. In result, this system occurs scale attachment and corrosion damage like pitting and crevice corrosion. In this study, electrochemical polarization test of heat exchanger tubing material (copper, aluminium brass, 30% cupronickel(30% Cu-Ni)) was carried out in 60% lithium bromide solution at $95^{\circ}C$. As a result of polarization test, corrosion behavior by impressed potential and local corrosion. such as galvanic corrosion, pitting corrosion behavior, of tubing materials was investigated. The main results obtained are as follows: (1) The effect of pitting and crevice corrosion control of 30% cupronickel in 60% LiBr solution at $95^{\circ}C$ is very excellent. (2) Dissimilar metal corrosion of 30% cupronickel coupling to aluminium bronze is the most sensitive. (3) Current density behavior of tube materials by impressed potential is high in order of copper > aluminium brass > 30% cupronickel.

• 한국재료학회지
• /
• 제31권9호
• /
• pp.496-501
• /
• 2021

Metal halide perovskite nanocrystals, due to their high absorption coefficient, high diffusion length, and photoluminescence quantum yield, have received significant attention in the fields of optoelectronic applications such as highly efficient photovoltaic cells and narrow-line-width light emitting diodes. Their energy band structure can be controlled via chemical exchange of the halide anion or monovalent cations in the perovskite nanocrystals. Recently, it has been demonstrated that chemical exfoliation of the halide perovskite crystal structure can be achieved by addition of organic ligands such as n-octylamine during the synthetic process. In this study, we systematically investigated the quantum confinement effect of methylammonium lead bromide (CH₃NH₃PbBr₃, MAPbBr₃) nanocrystals by precise control of the crystal thickness via chemical exfoliation using n-octylammonium bromide (OABr). We found that the crystalline thickness consistently decreases with increasing amounts of OABr, which has a larger ionic radius than that of CH₃NH₃⁺ ions. In particular, a significant quantum confinement effect is observed when the amounts of OABr are higher than 60 %, which exhibited a blue-shifted PL emission (~ 100 nm) as well as an increase of energy bandgap (~ 1.53 eV).

• 대한화학회지
• /
• 제14권1호
• /
• pp.85-89
• /
• 1970

방사성 브롬으로 표시한 브롬화이소프로필을 사용하여 니트로벤젠 용액내에서 브롬화칼륨과 브롬과이소프로필 사이에 일어나는 브롬교환반응의 속도를 19$^{\circ},\;25^{\circ}$및 40$^{\circ}C$에서 측정하였다. 본 실험의 결과는 이 브롬교환반응이 브롬화갈륨에 관하여 2차 반응이고 브롬화이소프로필에 관하여 1차 반응임을 보여준다. 19$^{\circ}C$에서의 반응속도 상수 값이 $k_3=3.2{\times}10^{-2}l^2{\cdot}mole^{-2}sec^{-1}$임을 알았다. 그리고 반응속도상수와 온도와의 관계로부터 이 교환반응에 대한 활성화에너지, 활성화엔탈피 및 활성화엔트로피 값을 계산하였다.

• 센서학회지
• /
• 제30권6호
• /
• pp.451-455
• /
• 2021

Porous copper bromide (CuBr) films are highly advantageous for detecting ammonia (NH₃). The fabrication of porous CuBr films requires complex high-temperature processes or multistep processes. Herein, we report the uncomplicated preparation of porous CuBr films by a spin-coating method and the films' excellent NH₃ sensing properties. The porous films were prepared by spin-coating 100, 150, and 200 mM CuBr solutions, and then dried in a vacuum oven for 2 h. All the films showed a high NH₃ response; in particular, the film prepared using a 100 mM CuBr solution showed an extremely high response (resistance ratio = 852) to 5 ppm NH₃. The film also showed fast response and recovery times, 272 s and 10 s respectively, even at room temperature. The outstanding NH₃ sensing characteristics were explained in relation to the porosity and thickness of the prepared films. The high-performance NH₃ sensors used in this study can be used for both indoor air quality and environmental monitoring applications.

• Bulletin of the Korean Chemical Society
• /
• 제16권4호
• /
• pp.310-315
• /
• 1995

The heterobimetallic anion, (OC)5CrMn(CO)5-M+ (M+=Na+, PPN+), which has a donor-acceptor metal-metal bond1, was reacted with allyl bromide to yield BrCr(CO)5- and Mn(CO)5(CH2CHCH2). The reaction mechanism has been proposed in terms of the consecutive reaction pathway in which Cr(CO)5(THF) is an important intermediate leading to the corresponding product. Counterion effect on this reaction was also evaluated and the results were compared with those of the corresponding reaction of the mononuclear carbonyl anion, Mn(CO)5-.

• 대한기계학회논문집B
• /
• 제21권2호
• /
• pp.294-302
• /
• 1997

Falling-film evaporation experiments for aqueous solution of lithium bromide (LiBr) were performed on a horizontal smooth 19.05-mm-dia copper tube. Average heat transfer coefficients were obtained with varied film Reynolds numbers, system pressures, LiBr concentrations and degrees of wall superheat. Heat transfer coefficients increase with increasing system pressure and decreasing concentration. For degrees of wall superheat, the heat transfer coefficient did not't show the distinct trend. For this experimental ranges, heat transfer coefficients showed maximum values at an optimal film Reynolds number. The results of this work were compared with pool boiling data reported previously, and it was shown that the heat transfer performance is superior to the pool boiling.