• Journal of the Korea Society of Computer and Information
• /
• v.13 no.3
• /
• pp.115-122
• /
• 2008

The terrestrial DMB receivers and their application products need many tests such as normal reception, reception state for the noisy environment, reception state changes due to the changes of output power of the DMB signal, and reception state of various environment. Therefore, the real-time simulation system of the terrestrial DMB broadcasting system is a necessity to the terrestrial DMB research institutions. manufacturers, and other related organizations. In the paper, we design the DMB simulation system, which generates the real-time streams of terrestrial DMB broadcast signals and simulates the real DMB broadcasting signals. The system consists of T-DMB signal generator with PCI interface and simulation software for various functional components of program. The study reveals that the implementation of software-based T-DMB simulation system is possible with low cost. Through various experiments, we evaluate the performance of the simulation system, and we provide the future directions of research.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.3
• /
• pp.25-32
• /
• 2016

Mobile Ad Hoc Networks(MANETs) consists of mobile nodes which communicate with each other without any centralized infrastructure. Message broadcasting by flooding for route discovery in MANET can result in high redundant retransmission, contention and collision of broadcasting packet, known as the broadcast storm problem collectively. The cross-layer design is adopted in this paper, which lets routing layer share the received signal strength information at MAC layer. Also this paper proposes a new probabilistic approach that dynamically adjusts the rebroadcasting probability of a node for routing request packets (RREQs) according to the received signal strength. The simulation results show that the proposed approach demonstrates better performance than blind flooding, fixed probabilistic broadcasting approaches.

• ETRI Journal
• /
• v.24 no.3
• /
• pp.247-250
• /
• 2002

In this paper, we propose three symbol syn-chronization schemes for Orthogonal Frequency Division Multiplex (OFDM) systems. The cyclic extension preceding OFDM symbols is of decisive importance for these schemes. The first scheme uses the phase-differential coding of the received OFDM signal. The second and the third schemes use the length of the received OFDM signal. All three schemes make symbol synchronization possible, even though there is a frequency off-set in the system. Simulation results show that these schemes can be used to synchronize an OFDM system over AWGN and multi-path fading channels.

• Journal of Satellite, Information and Communications
• /
• v.9 no.1
• /
• pp.28-32
• /
• 2014

In this paper, we analyzed performance of signal detection for terrestrial digital multimedia broadcasting (T-DMB) system in various channel environments that applied gaussian, Rayleigh and COST 207 environments that estimate response of real channel state. In order to detect the signal, a signal detection scheme based on energy detection is employed. We generated T-DMB signals so that estimate properly simulation result. For evaluating the signal detection performance, detection probability is derived. We consider two kinds of detection segment, which are three segments and five segments. And we compare the system performances in accordance with the detection segment. From simulation results, it is confirmed that the performance of signal detection is raised as increase the number of segments. The result of this paper can be applied to implement signal detection of broadcasting system.

• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.2
• /
• pp.76-81
• /
• 2021

This study proposes a method to reduce the phase error of the received signal to detect the object bearing. The phase shift of the received signal occurs due to the multipath of the signal by natural structure or artificial structures. When detecting the direction of the object using radio waves, the phase of the received signal cannot be accurately detected because of the phase bearing error in the object detection direction. The object detection direction estimation depends on the phase difference, antenna installation distance, signal source wavelength, frequency band and bearing angle. This study reduces the error of the phase bearing by using the phase delay of the relative phase difference for the signals incident on the two antennas. Through simulation, we analyzed the object direction detection performance of the proposed method and the existing method. Three targets are detected from the [-15°, 0°, 15°] direction. The existing method detects the target at [-13°, 3°, 17°], and the proposed method detects the at [-15°, 0°, 15°]. As a result of the simulation, the target detection direction of the proposed method is improved by 2 degrees compared to the existing method.

• Journal of Korea Multimedia Society
• /
• v.13 no.10
• /
• pp.1525-1533
• /
• 2010

With the digital terrestrial television broadcasting transition, terrestrial television broadcasting have required the replacement of retransmission facilities for the analog broadcasting installed in the existing apartment, building, cable TV station, MATV system and so on. In addition, new standards have been enacted for retransmission of the digital television broadcasting in MATV system. To deal with this issue, in this paper, we propose a new 8-VSB remodulator that can retransmit signals of the terrestrial digital television broadcasting. Moreover, we present a standard and the process composition of the 8-VSB remodulator, and an experimental environment configuration for performance evaluation. To achieve this, we have implemented the 8-VSB remodulator with the sequential process components comprised of the RF signal retransmission, the TS stream modulator, the RF signal reception and demodulation. Through the simulation, we analyze the performance standard from the measured data such as spurious and phase noise. And then, we measure SNR and EVM of each attenuation step of the signal obtained by the signal processor and the 8-VSB remodulator with the same retransmission environment and conditions. Experimental results show that both the 8-VSB remodulator and the signal processor can be used as equipment for the retransmission of the terrestrial digital television broadcasting. In addition, the 8-VSB remodulator performed well to improve the transmission efficiency for the digital broadcasting signal, compare to the existing signal processor.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.2
• /
• pp.7-11
• /
• 2003

Nowadays, as digital technologies are rapidly developed and requirements for the various types of broadband multimedia services increases, the radio broadcasting is moving to digitalization. DAB(Digital Audio Broadcasting), as an alternation of existing analog radio broadcasting, is a new type of multimedia broadcasting system. DAB supports not only high-quality audio broadcasting but also various types of multimedia data services. In this paper, we investigate the performance optimization method of MOT Protocol, as the standard for additional services, to support the multimedia services in the DAB network. Because the performance of the MOT protocol is dependent on various parameters such as segment size, segment repetition and so on, we find those by simulation for performance optimization. According to simulation results, the suitable segment size is about 2Kbyte and segment repetition is 4 times for performance optimization.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.4
• /
• pp.123-128
• /
• 2017

This paper relates with the Hybrid-SMMA adaptive equalization algorithm that is possible to improve the equalization performance based on adaptive modulus and adaptive stepsize which is propotional to the output power of equalizer in the current SMMA (Sliced Multi Modulus Algorithm). The fixed statistic modulus of transmitted signal is used in current SMMA algorithm in order to generate the error signal for updating the tap coefficient of equalizer. The proposed Hybrid-SMMA based on the adaptive modulus which is propotion to the equalizer output signal power and adaptive stepsize which is fuction of the nonlinearties of error signal. The computer simulation was performed in order to confirm the improved equalization performance of proposed algorithm. As a result of computer simulation, the proposed Hybrid-SMMA has fairly good in every performance than the current SMMA.

• Journal of Broadcast Engineering
• /
• v.9 no.4 s.25
• /
• pp.357-370
• /
• 2004

In this paper we propose Digital Signal Processing (DSP) techniques for the Equalization Digital On-Channel Repeater(EDOCR) in the ATSC digital TV (DTV) System. DSP techniques consist of demodulation. baseband equalization, and remodulation. Since the time delay caused by signal processing in the EDOCR can seriously affect the performance of ATSC legacy receivers, it is required that the processing time should be minimized as much as possible. To achieve this goal, we focus on the reduction of the EDOCR's time delay with the minimization of its performance degradation. In addition, we present recommended proper parameters for hardware implementation based on extensive simulation result.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.3
• /
• pp.1-8
• /
• 2020

This paper studied a method of estimating target information using a radar in wireless communication. Position information on the target can be estimated angle, distance and velocity. The velocity information can be estimated since the Doppler frequency is changed in the moving target. The signal incident on the receiving array antenna is multiplied by the delay time and the reference signal to represent the output signal. This output signal is estimated by applying FFT (Fast Fourier Transform) after calculating signal correlation through correlation integrator. Since the output signal must be calculated within the correlator, it should be processed with the Dwell time. The correlation signal of the correlation integrator outside this Dwell time is indicated by the velocity measurement error. The FFT is applied to the signal that has passed through the correlated integrator in order to estimate the distance of the signal. The Doppler resolution must be improved because the FFT estimates target information using the Doppler information. The Doppler resolution decreases with increasing the integration time. The velocity information estimation should have no spread of the velocity. As a result of the simulation, there was no spread of the target velocity in this study.