• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.210-213
• /
• 2001

In this paper, we analyzed the impedance characteristic of the bow-tie antenna for the broadband operation. The pulsed subsurface radar uses the impulse to collect information for subsurface objects, so the broadband antenna is used to minimize reflections in the feed point for the broadband characteristic of impulse. Therefore, in this paper we analyzed the broadband bow-tie antenna with Ensemble 5.0.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.687-692
• /
• 2002

The design of broadband patch antenna with the new feeder structure is proposed in this paper. The antenna operates in the center frequency 5.8 GHz. Proposed the new feeder structure has also broadband characteristic and reduced antenna size. To confirm broadband characteristic, compared with probe feeder antenna. After designing and manufacturing, the antenna bandwidth enhanced by 34.5 % and the patch size reduced by 45 %.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.197-202
• /
• 2005

In this paper, we analyzed the signal distortion incorporating meander-shaped transmission line on PCB in broadband frequency range, up to 50GHz. This broadband characteristic provides reasonable analysis of digital pulse having very short rising time. Simulation results reveal suppression characteristic at multiband which is dependent on only the width of meander arm. This width of arm also can be adjusted using different permittivity because it provides different effective wave-length. It is found that the suppression characteristic shows sharpness with as a function of the number of arms. However, these characteristics shown limitation for microstrip line structure rather than for stripline structure, so we can avoid these unwanted phenomena using stripline structure.

• 한국정보통신설비학회:학술대회논문집
• /
• 2005.08a
• /
• pp.290-296
• /
• 2005

In this paper, we describe ubiquitous environments and the trend of convergence that is an evolution path of current telecommunication, and show the concept of broadband convergence network, service feature and evolution path. In order to converge wire and wireless communication, telecommunication and broadcasting, voice and data efficiently, broadband convergence network divides a network into service layer, control layer, transport layer, ubiquitous access and terminal layer. Broadband convergence network will be a network that can provide and control broadband multimedia services with QoS and securityof different and customized level. Then we depict characteristics and types of broadband multimedia service, and describe the characteristic of broadband convergence network. Finally, we show ubiquitous network based on the broadband convergence network to provide ubiquitous service which is a future telecommunication service. We also describe requirements of ubiquitous network such as an intelligent and context based platform, convergence terminals, ubiquitous computing devices, etc., and give various emerging technologies and those applications.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.3 no.2
• /
• pp.81-89
• /
• 2004

In this paper, we describe ubiquitous environments and the trend of convergence that is an evolution path of. current telecommunication, and show the concept of broadband convergence network, service feature and evolution path. In order to converge wire and wireless communication, telecommunication and broadcasting, voice and data efficiently, broadband convergence network divides a network into service layer, control layer, transport layer, ubiquitous access and terminal layer. Broadband convergence network will be a network that can provide and control broadband multimedia services with QoS and security of different and customized level. Then we depict characteristics and types of broadband multimedia service, and describe the characteristic of broadband convergence network. Finally, we show ubiquitous network based on the broadband convert- gence network to provide ubiquitous service which is a future telecommunication service. We also describe requirements of ubiquitous network such as an intelligent and context based platform, convergence terminals, ubi- quitous computing devices, etc.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.5
• /
• pp.528-537
• /
• 2011

In this paper, a broadband antenna of the CPW structure with a band-notched characteristic is presented. To obtain this characteristic, the complementary split ring resonator(CSRR) is inserted in the ground plane. In addition, the IEEE 802.11a WLAN band(5.15～5.825 GHz) appears in the band-notched characteristic. The proposed antenna dimension is $36{\times}60{\times}1.6\;mm^3$, and it is designed on the FR-4 substrate having a relative dielectric constant of 4.4. The designed antenna shows that the resonant frequency is 2.03～10.78 GHz below the return loss of -10 dB and a VSWR less than 2 was satisfied. As a result, the proposed CSRR has a band-notched characteristic in the range of 4.917～6.017 GHz which the center frequency is about 5.4 GHz band.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.7
• /
• pp.1529-1533
• /
• 2005

In this paper designed available pre-amplifier to Intrabroadband power amplifier. Designed pre-amplifier used WJ company's AMI which frequency characteristic and noise characteristic are superior. Designed to have superior VSWR characteristic and frequency characteristic covering broadband of 100MHz ${\~}$ 3GHz using feedback. Designed ye-amp broadband special qualify such as EMC measurement equipment roll important position do to utilize to power amplifier of equipment that how consider.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.9
• /
• pp.971-978
• /
• 2010

In this paper, we propose a compact multiple meander RFID tag antenna with broadband characteristic. The proposed tag antenna has been designed using the multiple meander form to effectively minimize the U-shaped half wavelength dipole antenna as the radiator part. The commercial tag chip is attached to the upper center of the rectangular shaped feed for impedance matching. The size of the antenna is $20{\times}19.7\;mm^2$ and VSWR<5.8 bandwidth is 855~964 MHz which covers the world UHF RFID bandwidth.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.2
• /
• pp.265-277
• /
• 1998

In this paper, to investigate the possibility of fading reduction effect and high transmission rate in indoor multipath propagation environment, we measured and analyzed broadband signal conducting by frequency sweeping method in LOS(Line-of-Sight) environment. In measuring, we used vertically polarized, horizonatally polarized and circularly polarized and circularly polarized antenna to compare the fading reduction effect and the characteristic of bandwidth amplitude fluctuation between each broadband signals. As a result, it can be seen that the circularly polarized antenna can reduce the amplitude deviation of the broadband signal because it can remove the odd-times reflected wave in LOS environment. And also, It was found that the best effective diversity reception method is to use polarization branches, which install a circularly polarized antenna at the transmitting end and compose the vertical and horizontal antenna at the receiving end.

• Journal of KSNVE
• /
• v.6 no.6
• /
• pp.709-715
• /
• 1996

In recent years, the piping vibration in many Power Plants is being increased by the aged generating facilities due to a long time use. Generally, the pressure fluctuations associated with the flow-induced excitations in this case are broadband in nature. Mainly, the dominant sources of vibration are a vortex-shedding, plane waves and boundary layer turbulence. The peak level of the spectrum is proportional to the dynamic head. A severe disturbance in pipeline results in the generation of intense broadband internal sound waves which can propagate through the piping system. The characteristic frequencies of operating loads of 20%, 57%, 70%, 100% are 4 - 6 Hz and coincide with the results from impact hammering test and FEM analysis. We chose the wire energy absorbing rope restraint as a vibration reduction method after reviewing the various conditions such as site, installing space and economic cost etc. After installation, the vibration level was reduced about 54% in velocity.