본 연구는 도로 상의 눈이나 얼음의 제거에 사용되는 융빙제와 부식방지제 및 저부식성 제설제 그리고 이들의 조합에 대한 성능 및 구조물에 미치는 영향에 대하여 분석하였다. 동결융해 후 무게손실률은 저부식성 제설제가 융빙제와 부식방지제 및 이들의 조합보다 적게 나타났고, 상대동탄성계수 감소는 물, 저부식성 제설제 및 NaCl+JF-1004를 제외하고 융빙제와 부식방지제 및 이들의 조합물들은 동결융해 150사이클 이후에 급격히 떨어지는 것으로 나타났다. 또한 동결융해 후 콘크리트는 물을 제외하고 상당히 심한 표면 손상을 나타냈다. 융빙 효과는 융빙제와 저부식성 제설제 및 부식방지제의 조합하여 사용할 때가 이들 개별적으로 사용될 때보다 우수한 것으로 나타났고, 저부식성 제설제 및 부식방지제의 단독 사용은 초기 융빙 성능 뿐 아니라 지속성도 현저히 낮아 현장 적용에는 문제가 있는 것으로 판단된다. 강재부식시험의 pH는 저부식성 제설제와 NaCl+JF-1004의 pH는 알칼리성을 띠는 반면에 이외의 나머지에서는 중성에서 산성으로 변화해 가고 있는 것으로 나타났고, 염화나트륨의 조합물이 다른 수용액보다 상당히 빠르게 무게감량이 나타나 강재 부식속도가 빠르게 진행되는 것으로 나타났다. 이상으로부터 도로상의 눈이나 얼음의 제거를 위하여 융빙제의 조합물을 사용 시 최대한 도로 포장 및 교량에 손상이 적게 미치는 조성물에 대한 신중한 선택하여 사용해야 할 것이다.
새롭게 합성된 $rac-Me_2Si(2-p-tolylindenyl)_2ZrCl_2$ 촉매와 인디닐 리간드에 치환체가 붙어 있지 않는 상용촉매인 $rac-Me_2Si(Ind)_2ZrCl_2$ 촉매들을 조촉매인 methylaluminoxane (MMAO)를 사용하여 에틸렌/1-옥텐 공중합을 실시하였고, 반응물 내 1-옥텐의 농도를 변화시키며 얻어진 공중합체의 특성을 조사하였다. 촉매활성에 있어서 $rac-Me_2Si(2-p-tolylindenyl)_2ZrCl_2$ 촉매를 이용하여 공중합을 실시한 경우 다리구조를 가진 다른 촉매들과 달리 촉매활성이 감소하여 comonomer의 첨가에 따라 활성이 증가하는 comonomer effect는 발견되지 않았다. $^{13}C$ NMR 분석에서 공중합체에 삽입된 1-옥텐의 양은 촉매 리간드에 붙은 치환체에 의존함을 보였으며, 2-p-tolyl 치환체가 붙은 촉매로 얻어진 공중합체에서 1-옥텐 삽입량이 더 높음을 보였다. DSC, GPC 분석에서 반응물 내 1-옥텐의 농도가 증가함에 따라 공중합체의 녹는점, 결정성, 분자량이 모두 감소하였으며 $rac-Me_2Si(Ind)_2ZrCl_2$ 촉매보다 $rac-Me_2Si(2-p-tolylindenyl)_2ZrCl_2$ 촉매의 경우 녹는점, 결정성 및 분자량의 감소폭이 더 크게 나타났다.
팔당호 연안대의 수생식물상과 식생을 파악하기 위하여 2003년 4월부터 2004년 4월까지 9곳의 조사 지점을 선정하여 선방형구법을 이용하여 조사하였다. 팔당호 연안대에는 128종류의 관속식물이 생육하고 있는 것으로 조사되었고, 이중 수생식물은 38종류였다. 수생식물의 경우 정수식물이 21종류로 가장 많았고, 침수식물은 8종류였고, 침수식물 증류수는 이전 조사보다 감소한 것으로 파악되었다. 팔당호 주요 식생은 애기부들, 줄, 갈대가 우점하는 정수식물대로 파악되었고, 특히 두물머리, 광동교근처에 넓게 정수식물대가 넓게 발달하였다. 귀화식물은 11종류가 분포하고 있었으나, 출현 빈도는 상대적으로 높았다. 팔당호 연안대에 분포하는 식물의 출현 빈도를 조사 지점을 기준으로 살펴보면, 조사 지점당 수생식물은 2.7종류, 습생식물은 2.5종류, 육지식물은 1.8종류로 파악되었고, 수직대상분포 식생이 팔당호 연안대에서 발견되었다. 이러한 조사 결과는 팔당호 연안대가 수생태계의 전형적인 특성들을 지니고 있는 것으로 풀이된다.
Electronic industry had required the finer size and the higher performance of the device. Therefore, 3-D die stacking technology such as TSV (through silicon via) and micro-bump had been used. Moreover, by the development of the 3-D die stacking technology, 3-D structure such as chip to chip (c2c) and chip to wafer (c2w) had become practicable. These technologies led to the appearance of HBM (high bandwidth memory). HBM was type of the memory, which is composed of several stacked layers of the memory chips. Each memory chips were connected by TSV and micro-bump. Thus, HBM had lower RC delay and higher performance of data processing than the conventional memory. Moreover, due to the development of the IT industry such as, AI (artificial intelligence), IOT (internet of things), and VR (virtual reality), the lower pitch size and the higher density were required to micro-electronics. Particularly, to obtain the fine pitch, some of the method such as copper pillar, nickel diffusion barrier, and tin-silver or tin-silver-copper based bump had been utillized. TCB (thermal compression bonding) and reflow process (thermal aging) were conventional method to bond between tin-silver or tin-silver-copper caps in the temperature range of 200 to 300 degrees. However, because of tin overflow which caused by higher operating temperature than melting point of Tin ($232^{\circ}C$), there would be the danger of bump bridge failure in fine-pitch bonding. Furthermore, regulating the phase of IMC (intermetallic compound) which was located between nickel diffusion barrier and bump, had a lot of problems. For example, an excess of kirkendall void which provides site of brittle fracture occurs at IMC layer after reflow process. The essential solution to reduce the difficulty of bump bonding process is copper to copper direct bonding below $300^{\circ}C$. In this study, in order to improve the problem of bump bonding process, copper to copper direct bonding was performed below $300^{\circ}C$. The driving force of bonding was the self-annealing properties of electrodeposited Cu with high defect density. The self-annealing property originated in high defect density and non-equilibrium grain boundaries at the triple junction. The electrodeposited Cu at high current density and low bath temperature was fabricated by electroplating on copper deposited silicon wafer. The copper-copper bonding experiments was conducted using thermal pressing machine. The condition of investigation such as thermal parameter and pressure parameter were varied to acquire proper bonded specimens. The bonded interface was characterized by SEM (scanning electron microscope) and OM (optical microscope). The density of grain boundary and defects were examined by TEM (transmission electron microscopy).
Fungal pathogens have huge impact on health and economic wellbeing of human by causing life-threatening mycoses in immune-compromised patients or by destroying crop plants. A key determinant of fungal pathogenesis is their ability to undergo developmental change in response to host or environmental factors. Genetic pathways that regulate such morphological transitions and adaptation are therefore extensively studied during the last few decades. Given that epigenetic as well as genetic components play pivotal roles in development of plants and mammals, contribution of microbial epigenetic counterparts to this morphogenetic process is intriguing yet nearly unappreciated question to date. To bridge this gap in our knowledge, we set out to investigate histone modifications among epigenetic mechanisms that possibly regulate fungal adaptation and processes involved in pathogenesis of a model plant pathogenic fungus, Magnaporthe oryzae. M. oryzae is a causal agent of rice blast disease, which destroys 10 to 30% of the rice crop annually. Since the rice is the staple food for more than half of human population, the disease is a major threat to global food security. In addition to the socioeconomic impact of the disease it causes, the fungus is genetically tractable and can undergo well-defined morphological transitions including asexual spore production and appressorium (a specialized infection structure) formation in vitro, making it a model to study fungal development and pathogenicity. For functional and comparative analysis of histone modifications, a web-based database (dbHiMo) was constructed to archive and analyze histone modifying enzymes from eukaryotic species whose genome sequences are available. Histone modifying enzymes were identified applying a search pipeline built upon profile hidden Markov model (HMM) to proteomes. The database incorporates 22,169 histone-modifying enzymes identified from 342 species including 214 fungal, 33 plants, and 77 metazoan species. The dbHiMo provides users with web-based personalized data browsing and analysis tools, supporting comparative and evolutionary genomics. Based on the database entries, functional analysis of genes encoding histone acetyltransferases and histone demethylases is under way. Here I provide examples of such analyses that show how histone acetylation and methylation is implicated in regulating important aspects of fungal pathogenesis. Current analysis of histone modifying enzymes will be followed by ChIP-Seq and RNA-seq experiments to pinpoint the genes that are controlled by particular histone modifications. We anticipate that our work will provide not only the significant advances in our understanding of epigenetic mechanisms operating in microbial eukaryotes but also basis to expand our perspective on regulation of development in fungal pathogens.
1994년 성수대교 붕괴사고 이후 강구조물의 품질 관리를 위해 철강구조물제작공장 인증제도가 건설기술관리법에 도입되어 법정임의 인증제도로 운영되고 있다. 그러나 콘크리트 부재의 공장 생산 방식인 PC (Precast Concrete)에 대해 국가적인 품질인증 체계는 마련되어 있지 않다. 이에 건축 구조용 PC를 대상으로 적절한 품질인증제도 도입을 위해 북미, 유럽, 일본 등의 PC 품질인증제도를 조사하였다. 미에서 PC 공장인증제도를 운영하고 있는 곳은 PCI, NPCA, CPCI 등이 있다. 유럽에서 PC 제품을 판매하기 위해서는 CPR 305/2011을 따르도록 법으로 정해져 PC 제품을 포함한 모든 건설 제품은 2013년 7월부터 CE 마크를 의무적으로 부착해야 한다. 일본의 경우 토목용 PC 제품은 제품인증인 JIS 마크 인증을 받도록 되어 있고 건축 구조용 PC를 생산하는 공장은 일본 프리패브협회의 심사를 받고 있다. 이런 조사 결과에 근거하여 국내 인증 체계에 부합될 수 있도록 건축 구조용 PC 제품의 인증제도의 도입 방향을 이 논문에 제시하였다.
최근 건축정보 분야에서는 터널, 교량 등 도시의 인프라에도 건축정보모델링(BIM: Building Information Modeling)이 적용되면서 대형화된 도시 건축물의 유지 및 관리를 위해 BIM 뿐만 아니라 건물의 외부환경에 대한 정보가 필요하게 되었다. 또한, 건축물정보모델 및 도시/지리정보 모델 간 정보의 상호운용성을 바탕으로 다양한 시뮬레이션 및 도시계획, 국토보안 등 기타 응용프로그램에서의 상당한 이익과 발전을 가져올 수 있다는 관점에서 공간정보와 빅 데이터의 융합은 강한 잠재력을 지니고 있다. 이에 본 연구에서는 건축정보 분야의 개방형 BIM(open BIM) 표준모델인 IFC(Industry Foundation Classes)와 GIS분야의 표준모델인 CityGML의 정보를 효율적으로 연계하기 위해 IFC와 CityGML, LandXML의 정보체계 및 형상표현의 차이점을 비교분석하였으며 공간정보 분석을 위한 객체기반의 건축 도시통합모델의 개발방향을 제시하고 BIM과 GIS 간의 기초 융합전략 및 활용방안을 마련하고자 하였다.
Chitosan has been widely researched as bone substitution materials and membranes in orthopedic/periodontal applications. Chitosan nanofiber membrane was fabricated by chitosan nanofiber using electrospinning technique. The structure of the membrane is nonwoven, three-dimensional, porous, and nanoscale fiber-based matrix. The aim of this study was to evaluate the biocompatibility of chitosan nanofiber membrane and to evaluate its capacity of bone regeneration in rabbit calvarial defect. Ten mm diameter round cranial defects were made and covered by 2 kinds of membranes (Gore-Tex membrane, chitosan nanofiber membrane) in rabbits. Animals were sacrificed at 4 weeks after surgery. Decalcified specimens were prepared and observed by microscope. Chitosan nanofiber membrane maintained its shape and space at 4 weeks. No inflammatory cells were seen on the surface of the membrane. In calvarial defects, new bone bridges were formed at all defect areas and fused to original old bone. No distortion and resorption was observed in the grafted chitosan nanofiber membrane. However bone bridge formation and new bone formation at the center of the defect could not be seen in Gore-Tex membranes. It is concluded that the novel membrane made of chitosan nanofiber by electrospinning technique may be used as a possible tool for guided bone regeneration.
치아의 과도한 마모는 광범위한 치질의 상실, 교합평면의 부조화를 야기하고 기능적, 심미적 문제를 발생시킬 수 있다. 마모에 의한 수직 고경의 감소는 치조골의 보상성 성장에 의해 상쇄될 수도 있지만 보철물의 유지를 위한 치아의 길이가 부족하다면 환자에게 불편감이 없는 한에서 최소한의 수직 고경 증가를 동반한 보철적 수복이 필요하다. 본 증례는 33세 여성 환자로 하루에 콜라를 1리터 이상 마시고 밤에 심한 이갈이 습관을 가지고 있어 전악에 걸친 마모와 심미적, 기능적 불편감을 주소로 서울대학교 치과병원에 내원하였다. Erosion과 이갈이 습관으로 급속히 치아의 마모가 일어났고, 환자의 적절한 수직 고경을 결정하기 위해 안모와 발음, 심미, 기능 등을 평가한 결과 수직고경이 상실되었다고 판단되었다. 수복을 위한 5 mm의 수직고경 거상이 계획되었고 환자의 적응을 위해 임시치아의 수직고경을 각각 3 mm와 2 mm로 두번에 걸쳐 증가시켰다. 총 16주의 관찰기간 동안 임상증상과 불편감이 없음을 확인한 후, 전악을 금속도재 보철물로 수복하였다. 환자가 젊은 여성이라는 점에서 전치부는 collarless 금속도재 보철물로 수복하였다. 이상과 같은 과정을 통해 교합고경 회복을 동반한 보철 수복으로 적절한 심미적, 기능적 결과를 얻었기에 이를 보고하고자 한다.
When constructing projects such as road embankments, bridge approaches, dikes or buildings on soft, compressible soils, significant settlements may occur due to the consolidation of these soils under the superimposed loads. The compressibility of the soil skeleton of a soft clay is influenced by such factors as structure and fabric, stress path, temperature and loading rate. Although it is possible to determine appropriate relations and the corresponding material parameters in the laboratory, it is well known that sample disturbance due to stress release, temperature change and moisture content change can have a profound effect on the compressibility of a clay. The early research of Tezaghi and Casagrande has had a lasting influence on our interpretation of consolidation data. The 24 hour, incremental load, oedometer test has become, more or less, the standard procedure for determining the one-dimensional, stress-strain behavior of clays. An important notion relates to the interpretation of the data is the ore-consolidation pressure ${\sigma}_p$, which is located approximately at the break in the slope on the curve. From a practical point of view, this pressure is usually viewed as corresponding to the maximum past effective stress supported by the soil. Researchers have shown, however, that the value of ${\sigma}_p$ depends on the test procedure. furthermore, owing to sampling disturbance, the results of the laboratory consolidation test must be corrected to better capture the in-situ compressibility characteristics. The corrections apply, strictly speaking, to soils where the relation between strain and effective stress is time independent. An important assumption in Terzaghi's one-dimensional theory of consolidation is that the soil skeleton behaves elastically. On the other hand, Buisman recognized that creep deformations in settlement analysis can be important. this has led to extensions to Terzaghi's theory by various investigators, including the applicant and coworkers. The main object of this study is to suggestion the modified compression index value to predict settlements by back calculating the $C_c$ from different numerical models, which are giving best prediction settlements for multi layers including very thick soft clay.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.