• Structural Engineering and Mechanics
• /
• v.83 no.1
• /
• pp.93-108
• /
• 2022

Real-time hybrid simulation (RTHS) was applied to investigate the train-bridge interaction of a high-speed railway system, where the railway bridge was selected as the numerical substructure, and the train was physically tested. The interaction between the two substructures was reproduced by a servo-hydraulic shaking table. To accurately reproduce the high-frequency interaction responses ranging from 10-25Hz using the hydraulic shaking table with an inherent delay of 6-50ms, an adaptive time series (ATS) compensation algorithm combined with the linear quadratic Gaussian (LQG) was proposed and implemented in the RTHS. Testing cases considering different train speeds, track irregularities, bridge girder cross-sections, and track settlements featuring a wide range of frequency contents were conducted. The performance of the proposed ATS+LQG delay compensation method was compared to the ATS method and RTHS without any compensation in terms of residual time delays and root mean square errors between commands and responses. The effectiveness of the ATS+LQG method to compensate time delay in RTHS with high-frequency responses was demonstrated and the proposed ATS+LQG method outperformed the ATS method in yielding more accurate responses with less residual time delays.

• Journal of Welding and Joining
• /
• v.18 no.3
• /
• pp.68-75
• /
• 2000

The incomplete penetration(IP) discontinuity in butt joint weld, which is detected during safety analysis of the steel bridge by nondestructive evaluation(NDE) method, is classified as unacceptable defect according to the NDE codes and standards. In fact, there are a little allowance in butt joint weld in the view point of design criterion, and also detected IP discontinuity should be classified and evaluated for the fatigue strength and residual life estimation. In this study, we performed fatigue test to evaluate the fatigue strength of high strength steel(SWS490A) containing IP discontinuities in various size, the results compared and classified according to the bridge construction standard specification which published by korea administration of construction and traffic. Experimental results could be used to evaluate and estimate the IP discontinuities considering different stress range in butt joint bridge weld during periodic safety inspection.

• Journal of the Korea Safety Management & Science
• /
• v.23 no.4
• /
• pp.67-72
• /
• 2021

To ensure the safety and functionality of a railroad bridge, maintaining the integrity of the bridge via continuous structural health monitoring is important. However, most structural integrity monitoring methods proposed to date are based on modal responses which require the extracting process and have limited availability. In this paper, the applicability of the existing damage identification method based on free-vibration reponses to time-domain deflection shapes due to moving train load is investigated. Since the proposed method directly utilizes the time-domain responses of the structure due to the moving vehicles, the extracting process for modal responses can be avoided, and the applicability of structural health evaluation can be enhanced. The feasibility of the presented method is verified via a numerical example of a simple plate girder bridge.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.287-289
• /
• 2007

최근 우리나라 여러 주요 항만에 해상교량의 건설이 진행 중이거나 계획 중에 있는데, 이들 교량의 설치 위치나 규모가 주로 경제적인 측면만을 강조하여 이루어짐으로써, 선박 통항안전에 위협을 주고 있으며, 이해 당사자 간의 갈등이 고조되고 있는 현실이다. 이에 본 연구에서는 국내 해상교량 관련 법령과 절차에 대한 조사 및 연구를 통하여 현행 제도에 대한 문제점을 파악해 보고자 한다.

• Smart Structures and Systems
• /
• v.20 no.2
• /
• pp.175-180
• /
• 2017

The load-carrying capacity and structural behavior of concrete-filled steel tube (CFST) structures is highly influenced by the grouting compactness in the steel tube. Due to the invisibility of the grout in the steel tube, monitoring of the grouting progress in such a structure is still a challenge. This paper develops an active sensing approach with combined piezoceramic-based smart aggregates (SA) and piezoceramic patches to monitor the grouting compactness of CFST bridge structure. A small-scale steel specimen was designed and fabricated to simulate CFST bridge structure in this research. Before casting, four SAs and two piezoceramic patches were installed in the pre-determined locations of the specimen. In the active sensing approach, selected SAs were utilized as actuators to generate designed stress waves, which were detected by other SAs or piezoceramic patch sensors. Since concrete functions as a wave conduit, the stress wave response can be only detected when the wave path between the actuator and the sensor is filled with concrete. For the sake of monitoring the grouting progress, the steel tube specimen was grouted in four stages, and each stage held three days for cement drying. Experimental results show that the received sensor signals in time domain clearly indicate the change of the signal amplitude before and after the wave path is filled with concrete. Further, a wavelet packet-based energy index matrix (WPEIM) was developed to compute signal energy of the received signals. The computed signal energies of the sensors shown in the WPEIM demonstrate the feasibility of the proposed method in the monitoring of the grouting progress.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.283-286
• /
• 2007

최근 우리나라 여러 주요 항만에 해상교량의 건설이 진행 중이거나 계획 중에 있는데, 이들 교량의 설치 위치나 규모가 주로 경제적인 측면만을 강조하여 이루어짐으로써, 선박 동항안전에 위협을 주고 있으며, 이해 당사자 간의 갈등이 고조되고 있는 현실이다. 따라서 이 연구에서는 선박 통항로 상에 많은 해상교량을 가지고 있는 미국의 해상교량 관련 법령과 절차를 조사${\cdot}$연구하여 우리나라의 제도를 제안하는데 참조하고자 한다.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.3
• /
• pp.283-294
• /
• 2011

The variation of temperature in the steel girder bridge by air temperature is measured. A correlation between the daily temperature range, the maximum and minimum temperatures of the day, and the temperature of the bridge are analyzed. With the statistical data from the Korea Meteorological Administration, the temperature correlations analyzed in this study is able to predict temperature variations between the upper flange and the lower flange which calculates the realistic displacement values of a movable support and an expansion joint in design.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.3
• /
• pp.37-42
• /
• 2011

Recently, the cause of flood damage has been the local torrential rainfalls rather than a total amount of yearly rainfalls. The domestic design code of drainage pump is being improved by considering the effect of local torrential rainfalls, while there is no consideration on the local torrential rainfalls in the domestic design code of bridge-deck drainage. Compared with the code of Federal Highway Administration in USA, no rational bases are specified in the domestic design code of bridge-deck drainage. This paper proposes the reasonable design guideline for bridge-deck drainage considering the effect of local torrential rainfalls.

• Strategy21
• /
• s.42
• /
• pp.83-113
• /
• 2017

After defeat in World War II, Japan's Peace Constitution committed the country to forego the acquisition of offensive military capabilities. However, in the midst of the post-cold war period, Japan began to change its security posture in line with the so-called 'normal state theory', which called for a more robust defense posture and expanded security activities. The second Abe administration promoted these security policies by issuing a National Security Strategy as well as a new National Defense Program Outline(NDPO) in 2013 and by establishing new security institutions such as the National Security Council. The Abe administration also adopted the new concept of a 'Unified Mobile Defense Force' in the 2013 which replaced the 'Dynamic Defense Force' as a new criteria for the Self-Defense Force's acquisition of military capabilities. In this new concept of military capabilities, the Ground Self-Defense Force is planning to replace existing divisions with mobile divisions and to form 'Amphibious Rapid Deployment Bridge' for the first time in 2018, which has long been taboo in Japan. Japan has experience a Marine Corps in the past. Likewise, an offensive changes in the military strategy can change the spectrum of strategy and 'Amphibious Rapid Deployment Bridge' plays a big role in this. Furthermore, Japan is increasing the Coast Guard's budget and capabilities in preparation for contingencies around the Senkaku islands (called the Diaoyu in Chinese). The South Korea navy should utilize Japan's changing security posture to deter immediate threat such as North Korea's military provocations and potential enemy threat such as China, Japan, Russia.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.3
• /
• pp.57-67
• /
• 2021

A thorough administration of the arterial road network requires a continuous supply of updated and accurate information about the traffic that travels on the roads. One of the ways to effectively obtain the traffic volume and weight distribution of heavy vehicles is the BWIM technique, which is actively being studied. Unlike previous studies, this study was performed to develop a simplified Bridge Weigh-In-Motion (BWIM) algorithm that can easily estimate the axle spacing and weight of a traveling vehicle by utilizing the structural characteristics of the bridge. A short span RC T-beam bridge with no crossbeam installed was selected for the study, and then the strain response characteristics of bridge deck and girder was checked through preliminary field test. Based on the preliminary field test results, a simplified BWIM algorithm suitable for the bridge to be studied was derived. The validity and accuracy of the BWIM algorithm derived in this study were verified through field test. As a result of the verification test, the proposed BWIM algorithm can estimate the axle spacing and gross weight of the travelling vehicles with the average percent error of less than 3%.