• Corrosion Science and Technology
• /
• v.3 no.4
• /
• pp.166-171
• /
• 2004

Recent developments in Bridge Management Systems (BMS) and in Life-Cycle Cost (LCC) of bridges, have raised the need for evaluation procedure of future condition (Deterioration) of a bridge. Predicting future deterioration is not an easy task due to limited past data to extrapolate from and also due to difficulty in measuring actual deterioration such as section loss of steel on an actual steel bridge. Also, increase in live load and reduction of resistance are random variables, thus a probabilistic approach should be adopted for determining the future deterioration. Due to difficulties in evaluation of future deterioration on steel bridges, accepting uncertainties within a reasonable error, a deterministic procedure using bridge condition rating can be a useful tool for projection of future condition of bridges to identify repair and maintenance needs. The object of this paper is to determine applicability of evaluating deterioration of steel bridge components based on Bridge condition ratings. Bridge condition ratings of bridge components show wide variation for bridges of same age and does not directly correlate well with the age of the bridge and/or deterioration of the bridge. High uncertainty can be reduced by breaking down the rating and by sensitivity analysis. From refined condition rating data, generalized deterioration profile of structures based on age can be derived. Examples are shown for sample bridges in USA. Approximately, 3,000 short to medium span steel bridges were listed in the inventory database. Results show wide variation of rating factors but by subdividing the Bridge condition ratings for various categories general deterioration profiles of steel bridges can be determined.

• Steel and Composite Structures
• /
• v.29 no.4
• /
• pp.437-450
• /
• 2018

A bridge comprising of two girders, such as a twin steel box-girder bridge, is classified as fracture critical (i.e., non-redundant). In this study, the various bridge components of the twin steel box-girder bridge are investigated to determine if these could be utilized to improve bridge redundancy. Detailed finite-element (FE) models, capable of simulating prominent failure modes observed in a full-scale bridge fracture test, are utilized to evaluate the contributions of the bridge components on the ultimate behavior and redundancy of the bridge sustaining a fracture on one of its girders. The FE models incorporate material nonlinearities of the steel and concrete members, and are capable of capturing the effects of the stud connection failure and railing contact. Analysis results show that the increased tensile strength of the stud connection and (or) concrete strength are effective in improving bridge redundancy. By modulating these factors, redundancy could be significantly enhanced to the extent that the bridge may be excluded from its fracture critical designation.

• Steel and Composite Structures
• /
• v.39 no.3
• /
• pp.261-274
• /
• 2021

In a railway bridge, the CRTS II slab ballastless track is subjected to interlayer connection failures, such as void under slab, mortar debonding, and fastener fracture. This study investigates the influences of interlayer connection failure on the safe operation of high-speed trains. First, a train-track-bridge coupled vibration model and a bridge-track deformation model are established to study the running safety of a train passing a deformed bridge with interlayer connection failure. For each type of the interlayer connection failure, the effects of the failure locations and ranges on the track irregularity are studied using the deformation model. Under additional bridge deformation, the effects of interlayer connection failure on the dynamic responses of the train are investigated by using the track irregularity as the excitation to the vibration model. Finally, parametric studies are conducted to determine the thresholds of additional bridge deformations considering interlayer connection failure. Results show that the interlayer connection failure significantly affects the running safety of high-speed train and must be considered in determining the safety thresholds of additional bridge deformation in the asset management of high-speed railway bridges.

• The Journal of Korean Physical Therapy
• /
• v.34 no.4
• /
• pp.187-191
• /
• 2022

Purpose: The purpose of our study aimed to identify the effect of static and dynamic bridge exercise with gym ball using gym ball on muscle activation of trunk and lower-limb in healthy individuals. Methods: A total of 20 healthy adults participated in this study. The individuals performed general bridge exercise, static and dynamic bridge exercise using gym ball. During the three methods of bridge exercises, electromyography (EMG) data (% maximum voluntary isometric contraction) of the rectus abdominis, erector spinae, biceps femoris, and gastrocnemius were recorded using a wireless surface EMG system. Results: Rectus abdominis activation showed significantly greater during dynamic bridge exercise compared with general bridge exercise and dynamic bridge exercise. Erector spinae, biceps femoris, and gastrocnemius were greater during static and dynamic bridge exercise compared with general bridge exercise. Conclusion: Based on our results, bridge exercise using gym ball, particularly integrating lower-limb movement, could be a useful method to enhance muscle activation of trunk and lower-limb (rectus abdominis, erector spinae, biceps femoris, and gastrocnemius).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.597-605
• /
• 2019

IPM bridge is an integral bridge that can be applied from span 30.0m up to 120.0m, the shape conditions of IPM bridge is also applicable to the rahmen bridge. In this study, to perform the structural analysis of Rahmen bridge and IPM Bridge, the researchers compared the distribution types such as load, moment, and displacement of those bridges. Structural analysis was carried out on four span models ranging from single span bridges to four spans of 120.0 m, based on span length of 30.0 m. Structural analysis was carried out on those bridge with span 30.0m up to 120.0m. The conclusions drawn from this study are as follows. 1) The bending moments were calculated to be large for the Rahmen bridge, and the horizontal displacements were estimated to be large for the IPM bridge. 2) Since the bending moments are derived by the span length rather than the extension of the bridge, the permissible bending moment for the span length should be considered in the design. 3) The pile bent of the IPM bridge did not exceed the plastic moment of the steel pipe pile at 120.0m span, but because the horizontal displacement in the shrinkage direction is close to 25mm, the design considerations are needed. 4) In the actual design, it is important to ensure stability against member forces, so review of the negative moment is most important.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.2
• /
• pp.175-182
• /
• 2010

A composite safety barrier for bridge has been developed and the performance of the composite safety barrier for bridge has been compared with the steel safety barrier for bridge through computer simulation. As the structural strength performance, the composite safety barrier for bridge is superior to the steel safety barrier for bridge according that the deformation of the composite safety barrier for bridge is 17.0% of that of the steel safety barrier for bridge. As the passenger protection performance, the composite safety barrier for bridge is superior to the steel safety barrier for bridge according that THIV and PHD of the composite safety barrier for bridge are 47.1% and 49.0% respectively of those of the steel safety barrier for bridge. As the behavior of the vehicle after crash, the composite safety barrier for bridge is superior to the steel safety barrier for bridge showing the increased exit velocity and the reduced exit angle. Both of the steel and composite safety barrier for bridge are not scattered in the analysis.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.11a
• /
• pp.161-167
• /
• 2007

There were no related papers to study about that training ship's bridge was designed for safety navigation and efficient navigation training. Therefore, at first, on this paper, we grouped domestic training ship's bridge layouts into three classes like as "the front and the rear-type bridge layout", "the twin deck-type bridge layout", and "the single-type bridge layout" by mutually layout type between main bridge and training bridge. Furthermore, we investigated working type of navigation training on each bridge layouts through the questionnaire, and extracted merits and demerits for each bridge layouts to be going on operation and training at the same time. At last, we presented new type training ship's bridge model to improve demerits and to elevate merits above mentioned.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.2
• /
• pp.169-175
• /
• 2008

Usually, domestic training ship's bridge was designed for safe navigation and efficient navigation training. In this paper, we grouped domestic training ship's bridge layouts into three classes such as "the front and the rear-type bridge layout", "the twin deck-type bridge layout", and "the single-type bridge layout" by layout type between main bridge and training bridge. Furthermore, we investigated how to operate navigation training according to the type of bridge layout through the questionnaire, and extracted merits and demerits of each bridge layout in combination of normal operation with navigation training at the same time. We presented new type of training ship's bridge model to improve demerits and to elevate merits.

• Structural Monitoring and Maintenance
• /
• v.10 no.3
• /
• pp.207-220
• /
• 2023

The safety of bridges are critical in our transportation infrastructure. Bridge design and analysis require complex structural analysis procedures to ensure their safety and stability. One common method is to calculate the maximum moment in the girders to determine the appropriate bridge section. Girder distribution factors (GDFs) provide a simpler approach for performing this analysis. A GDF is a ratio between the response of a single girder and the total response of all girders in the bridge. This paper explores the significance of GDFs in bridge analysis and design, including their importance in the evaluation of existing bridges. We utilized Bridge Weigh-in-motion (B-WIM) measurements of five simple supported girder bridge in Indonesia to develop a simple GDF provisions for the Indonesia's bridge design code. The B-WIM measurements enable us to know each girder strain as a response due to vehicle loading as the vehicle passes the bridge. The calculated GDF obtained from the B-WIM measurements were compared with the code-specified GDF and the American Association of State Highway and Transportation Officials (AASHTO) Load and Resistance Factor Design (LRFD) bridge design specification. Our study found that the code specified GDF was adequate or conservative compared to the GDF obtained from the B-WIM measurements. The proposed GDF equation correlates well with the AASHTO LRFD bridge design specification. Developing appropriate provisions for GDFs in Indonesian bridge design codes can provides a practical solution for designing girder bridges in Indonesia, ensuring safety while allowing for easier calculations and assessments based on B-WIM measurements.

• Journal of the Korean Professional Engineers Association
• /
• v.39 no.6 s.189
• /
• pp.42-48
• /
• 2006

This is briefly to introduce about design and construction method newly adopted in Incheon bridge construction site. The Incheon Bridge Project are divided into 3 parts, that is Cable Stayed Bridge. Viaduct Bridge and Approach Bridge. In this paper, we will describe overview and construction sequence of each kind part.