• 제목/요약/키워드: Breast phantom

검색결과 111건 처리시간 0.026초

유방전용감마카메라에서 유방 보형물이 영상에 미치는 영향에 관한 고찰 (A Study on Effect of the Image Applying to Breast Implants in Breast Specific Gamma Imaging)

  • 이주영;이태수;박훈희
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제41권1호
    • /
    • pp.33-38
    • /
    • 2018
  • There are limits to check the lesion as inserting a breast implant patients. So the application of BSGI based on Nuclear Medicine examination has increased. In this study, therefore we confirmed the effect of the image applying to breast implants in Breast Specific Gamma Imaging. We utilized Dilon 6800 BSGI scanner and developed the phantom. The self-development phantom was a rectangular shape of $230{\times}190{\times}80mm$ size and had 5 spheres which consisted of diameters of 10, 13, 17, 22, 28 mm in central part. We injected $^{99m}TcO_4$ into the self-development phantom in the proportion of four to one and made each additional phantom filled with 0.9 % sodium chloride, silicon and paraffin. Each additional phantom was placed between detector and self-development phantom. Each image was acquired five times depending on the type and thickness of the additional phantom. Statistical analysis with SPSS ver.18 was applied. In the test of variation according to the thickness of all additional phantoms, as the phantoms which 0.9% sodium chloride, silicon and paraffin increased, the attenuation variation was higher(P<0.005). There was no significant difference in the attenuation variation and the quality of image for type of the additional phantom. Therefore, if the effect of the image applying to breast implants in Breast Specific Gamma Imaging is confirmed, the higher diagnostic value can be achieved.

보형물 삽입 유방의 압박 두께에 따른 유방 선량 평가 (Evaluation of Breast Dose by Breast Pressure Thickness of Breast Prosthesis Insertion)

  • 이현용;김지수
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제43권6호
    • /
    • pp.469-473
    • /
    • 2020
  • Breast cancer is growing rapidly year by year and has the highest incidence since 2001. As a result, the interest in mammography for early detection of breast cancer is increasing. However, mammography is accompanied by radiation exposure and therefore it is necessary to reduce exposure dose through appropriate test conditions. The significance of this study is that breast dose studies, which were limited to ordinary women, were applied to breast implant patient. Using MCNP simulation, the phantom with prosthesis inserted was developed to compare dose by tube voltage by pressure thickness. In addition phantom without prostheses has higher dose than phantom with prostheses. If these results were used as basic data, it would be possible to recommend test condition guideline only for breast implant patients.

3D 프린팅 비압박 유방 팬텀 제작을 위한 복셀 기반 수치 모델에 관한 연구 (A Numerical Voxel Model for 3D-printed Uncompressed Breast Phantoms)

  • 윤한빈;백철하;전호상;김진성;남지호;이자영;이주혜;박달;김원택;기용간;김동현;원종훈;김호경
    • 대한의용생체공학회:의공학회지
    • /
    • 제38권3호
    • /
    • pp.116-122
    • /
    • 2017
  • Physical breast phantoms would be useful for the development of a dedicated breast computed tomography (BCT) system and its optimization. While the conventional breast phantoms are available in compressed forms, which are appropriate for the mammography and digital tomosynthesis, however, the BCT requires phantoms in uncompressed forms. Although simple cylindrical plastic phantoms can be used for the development of the BCT system, they will not replace the roles of uncompressed phantoms describing breast anatomies for a better study of the BCT. In this study, we have designed a numerical voxel breast phantom accounting for the random nature of breast anatomies and applied it to the 3D printer to fabricate the uncompressed anthropomorphic breast phantom. The numerical voxel phantom mainly consists of the external skin and internal anatomies, including the ductal networks, the glandular tissues, the Cooper's ligaments, and the adipose tissues. The voxel phantom is then converted into a surface data in the STL file format by using the marching cube algorithm. Using the STL file, we obtain the skin and the glandular tissue from the 3D printer, and then assemble them. The uncompressed breast phantom is completed by filling the remaining space with oil, which mimics the adipose tissues. Since the breast phantom developed in this study is completely software-generated, we can create readily anthropomorphic phantoms accounting for diverse human breast anatomies.

Phantom Experiments for Breast Cancer Detection by Ultrasound Transmission Period

  • Sakasegawa, Aya;Hoshino, Hirokazu;Tsuji, Kiichi;Hayakawa, Yoshinori
    • 한국의학물리학회:학술대회논문집
    • /
    • 한국의학물리학회 2002년도 Proceedings
    • /
    • pp.481-484
    • /
    • 2002
  • In every cancer early detection and early treatment is the best way to decrease mortality of patients. Moreover early detection of breast cancer increases the possibility of breast conservation treatment. Although mammography is the most powerful modality for early detection, it is hazardous to be used for young women due to X-ray exposure. Another modality of image diagnosis is ultrasound echo technique. But it is not so powerful to detect breast cancer compared to mammography. Palpation is another modality, but is largely dependent on the skill and experience of medical doctors. A new technique is tested its validity in phantom experiments with good results.

  • PDF

3차원 입체정위 유방생검술의 정확도 및 정밀도 평가 (Evaluation of the Accuracy and Precision Three-Dimensional Stereotactic Breast Biopsy)

  • 이미화
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제38권3호
    • /
    • pp.213-220
    • /
    • 2015
  • 본 연구는 3차원 입체정위 유방생검술의 정확도를 알아보고, 심부침생검을 이용하여 Stereotactic biopsy과 Sonoguided biopsy의 정확도와 정밀도를 평가하고자 한다. Stereotactic QC phantom을 이용하여 실제 5개의 target 위치로 3D sterotactic machine의 정확도를 측정하고, CT장비로 Scan하여 실측을 구해 X, Y, Z의 길이의 정밀도를 비교한다. 유방조직과 유사하게 제작한 Agar power phantom을 이용하여 5개의 각기 다른 needle tip Target을 통해 3D sterotactic machine과 2D ultrasound machine의 정확도를 비교하고, Z축을 장비별로 실측하여 정밀도와 신뢰도를 비교하며, 6개의 모조병소 Target을 심어놓은 Medical application phantom으로 표적하여 육안검사와 Specimen검사를 통해 정확도를 확인하였다. Stereotactic QC phantom으로 측정한 3D sterotactic machine의 정확도는 100%였으며, CT와 비교한 정밀도는 X, Y, Z축이 모두 p>0.05로 나타났다. Agar powder phantom으로 측정한 두 장비의 정확도는 100%의 정확도를 보였으며, CT와 두 장비 사이에는 p > 0.05로 차이가 없었다. 그러나 2명의 방사선사가 측정한 신뢰도분석에서 3D sterotactic machine은 ICC가 0.954였고, 2D ultrasound machine은 0.785로 2D ultrasound machine이 술자에 따라 차이가 있었다. Medical application phantom의 실험에서 3D sterotactic machine은 Sliced boneless ham을, 2D ultrasound machine은 small chalk powder group를 찾을 수 없었다. Phantom을 이용한 3차원 입체정위 유방생검술의 정확성은 우수하게 나타났고, 인체조직과 비슷한 Agar powder phantom과 유방 조직과 비슷한 Medical application phantom을 이용하여 Stereotactic biopsy과 Sonoguided biopsy의 정확도와 정밀도 모두 우수하게 나타났다. 또한 Medical application phantom의 심부침생검의 정확성 평가에서 각 검사에 따라 생검 표본이 병소의 형태에 따라 상이하게 채취되었고, 3차원 입체정위 유방생검술의 재현성이 유방 초음파검사보다 술자의 영향없이 우수하였다.

공명현상을 이용한 유방조직 팬텀의 석회화 관찰 (Observation with Calcifications of Breast Tissue Phantoms Using Acoustic Resonance)

  • 하명진;김정구
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제31권1호
    • /
    • pp.61-69
    • /
    • 2008
  • 유방초음파 검사는 유방암 검사에 있어 유방촬영술에 비하여 많은 장점이 있으나, 미세석회화 발견에는 적합하지 않은 단점이 있다. 이에 유방초음파 검사에서 기존의 7.5 MHz 선형 탐촉자를 사용하여 매질의 공명현상을 이용한 유방조직 석회화 병변을 관측할 수 있는 방법을 연구하였다. 먼저 gelatin과 돼지 젖가슴살을 이용하여 유방조직 팬텀을 제작하였으며, 외부 진동을 변화시켜 가며 석회화 병변을 관측하였다. 유방조직 팬텀안에 주입된 석회화는 주변 조직과 다른 공명을 일으키면서 외부진동에 따라 음향공명의 정도가 파워도플러의 ROI 영역 내의 색상의 밝기와 영역의 차이로 나타내었다. 낮은 주파수 영역에는 음향공명이 거의 나타나지 않았으며, 약 $300{\sim}400\;Hz$ 사이에서 일정한 플래토우 영역을 나타내었으며, 이후 주파수가 증가함에 따라 색상이 사라짐을 확인하였다.

  • PDF

유방암의 근접치료 시 수학적 모의피폭체를 이용한 인접장기의 선량평가 (Radiation Dose Calculation using MIRD TYPE PHANTOM in the Surrounding Organs during Brachytherapy of Breast Cancer)

  • 박은태;김정훈;임인철
    • 한국방사선학회논문지
    • /
    • 제10권4호
    • /
    • pp.271-278
    • /
    • 2016
  • 본 연구는 유방암의 근접치료 시 수학적 모의피폭체를 이용하여 유방 및 인접장기의 선량을 평가하고자 하였다. 좌측 유방과 우측 유방을 선원으로 설정하여 $^{192}Ir$$^{103}Pd$ 핵종에 대한 흡수선량을 분석하였다. 그 결과 선원 장기에 대한 선량은 $^{192}Ir$$^{103}Pd$에 비해 높은 흡수선량을 보였으며, 반대측 유방의 선량도 $^{192}Ir$이 높게 나타났다. 또한 유방암의 근접치료 시 특히 유의해야 할 인접장기는 폐, 간, 심장, 반대측 유방으로 평가되었다.

좌측 유방암 환자의 방사선 치료 시 환자자세에 따른 반대편 유방의 산란선량 측정 (Contralateral Breast Doses Depending on Treatment Set-up Positions for Left-sided Breast Tangential Irradiation)

  • 주찬성;박수연;김종식;최병기;정윤선;박원
    • 대한방사선치료학회지
    • /
    • 제27권2호
    • /
    • pp.175-181
    • /
    • 2015
  • 목 적 : 좌측 유방암 환자의 방사선 치료 시 바로 누운 자세 및 엎드린 자세 에 따른 환자 자세변화 시 발생하는 반대편 유방의 산란선량을 사방향 조사방법에 따라 측정하여 분석하고자 한다. 대상 및 방법 : Human Phantom (Anderson Rando Phantom. USA)을 대상으로 실제 좌측 유방암 환자로 가정한 후, Supine용 Breast Board와 본원에서 주문 제작된 Prone Breast Board를 이용하여 처방선량 50 Gy/25회로 치료계획(Conventional technique, Field-in-Field, IMRT)을 수립하였다. 치료 계획 수립 후 Human Phantom 의 중심축을 기준점으로 하여 우측방향으로 0 mm, 10 mm, 30 mm, 50 mm 떨어진 위치에 유리 선량계(GD-302M, SRS Technol, Japan)를 부착한 후 환자 자세에 따른 치료 방법에 따라 산란선량을 측정하였다. 이 때 각각의 자세 측정 시 모의치료 계획과 동일한 자세를 유지하기 위해 측정 전 EPID를 이용하여 L-gram 촬영을 실시하였으며 Prone-Device를 이용한 측정 시에는 동일한 입사 점을 확인하기 위해 Human Phantom 에 입사점을 표시하여 5회 측정된 평균값으로 각각의 치료계획 선량과 비교 분석하였다. 결 과 : 각각의 자세에 따른 치료방법에 따라 반대 측 유방의 산란선량을 측정한 결과 바로 누운 자세가 엎드린 자세에 비하여 평균 1.2%~1.8% 이상 치료계획 선량 보다 증가함을 보였고 엎드린 자세일 때는 오히려 치료계획 선량보다 평균 0.81~0.9% 이상 감소함을 보였다. 그러나 엎드린 자세 일 때 반대 측 유방의 위치 별 흡수선량 값은 바로 누운 자세일 때 비하여 총 처방선량의 평균 2.7%로 최대 4% 이상 나타났으며 Conventional technique이 Field-in-Field나 IMRT 비하여 평균 3.3%이상 높게 나타남을 보였다. 결 론 : 본 연구는 Human Phantom 을 이용하여 좌측 유방암 환자의 방사선 치료 시 환자의 자세 변화에 따른 반대편 유방의 산란선량을 치료 방법 별로 비교분석 하였다. 실제 환자의 자세 변화에 따른 유방변화를 가정하여 Human Phantom을 위치시켰으나 실제 환자의 개별적 특성에 따라 차이가 발생할 수 있으며 특히 엎드린 자세 시 환자의 자세 재현의 어려움에 따른 오차가 더욱 크게 발생할 수 있다. 이런 오차로 인하여 좌측 폐 및 심장 등의 선량을 급격히 줄여주는 장점에도 불구하고 반대측 유방에 산란선량을 증가시킬 수 있는 가능성이 있음을 확인하였다. 따라서 실제 환자를 대상으로 prone position을 적용할 경우, 치료방법 및 환자 자세확인을 위한 정확한 검증과정의 임상적 노력이 필요할 것으로 사료된다.

  • PDF

유방조직등가 팬텀을 이용한 디지털유방촬영장치의 FFDM과 DBT의 선량과 영상품질에 대한 융합 연구 (A study of dose and image quality with Convergence FFDM and DBT using tissue-equivalent phantom in digital mammography)

  • 유영신;한동균
    • 한국융합학회논문지
    • /
    • 제10권2호
    • /
    • pp.29-34
    • /
    • 2019
  • 본 연구는 디지털 유방촬영장치의 DBT(Digital Breast Tomosynthesis)와 FFDM(Full Field DigitalMammography)의 비교를 위해 유방조직등가팬텀을 이용하여 두께와 밀도를 변화시켜 선량 및 화질을 평가하여 DBT의 유용성을 평가하였다. 측정 결과 평균유선선량은 팬텀 두께 6 cm이상 밀도 70% 이상일 때, 두께 7 cm이상 밀도 50% 이상일 때 FFDM 보다 DBT가 낮은 것을 알 수 있었다. 영상 측정 결과, 섬유소는 DBT에서 우수하다고 측정 되었고, 작은 석회화 그룹과 종양에서는 FFDM 이 우수하였다. 유방의 복잡한 조직과 유사한 BR3D 팬텀에서는 모든 두께와 섬유소, 석회화 및 종양 그룹 모두 DBT 가 우수하다고 측정 되었다. DBT는 FFDM보다밀도가 높고 두께가 두꺼운 두께가 두껍고 밀도가 높은 유방에서 영상 품질 우수하고 낮은 선량을 제공함으로서, 한국 여성의 많은 분포를 차지하는 치밀유방에 더 유용할 수 있을 것이라 사료된다.

유방엑스선검사에서의 변형된 ACR 팬텀 제작을 통한 모조병소의 위치와 두께 변화에 따른 영상의 품질 평가 (Evaluation of Image Quality according to Insert Position and Thickness Change by Fabricating Modified ACR Phantom in Mammography)

  • 엄현자;박찬록
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제45권2호
    • /
    • pp.103-109
    • /
    • 2022
  • To maintain improved image quality in mammography, the quality control process is performed using the ACR (American college of radiology) phantom. In addition, many studied were performed by fabricating the customized breast phantom to provide more information in mammography. Thus, the purpose of this study was to evaluate the image quality by designing the modified ACR phantoms. The five modified acrlylic ACR phantoms were designed by considering insert position and phantom thickness. The phantoms were consisted of 4.5, 3.0, and 1.5 cm in terms of phantom thickness, and 3.0, 2.0, and 0.5 cm in terms of insert position, respectively. The acquired images were evaluated by PSNR (peak signal to noise ratio), RMSE (root mean square error), CC (correlation coefficient), CNR (contrast to noise ratio), and COV (coefficient of variation). Based on the similarity analysis, the result is suitable between conventional and new designed phantoms. In addition, the CNR and COV results in terms of insert position showed that image quality for 0.5 cm was 2.3 and 27.4% improved compared with 2 and 3 cm, respectively. According to phantom thickness results, the CNR result for 1.5 cm and COV result for 4.5 cm were 50.1 and 62.7% improved compared with that those conditions. In conclusion, we confirmed that the image quality depends on the breast size and thickness through modified ACR phantom study.