• Food Engineering Progress
• /
• v.15 no.4
• /
• pp.289-296
• /
• 2011

Twenty four fractions by solvent extraction and/or acid precipitation from fruit body and culture broth of Inonotus obliquus were prepared, and their inhibitory effect against acetylcholinesterase (AChE) was investigated. Among these fractions, acid (1 M HCl) precipitates from cell-free culture broth and fruit body exhibited the highest inhibitory effect on AChE in vitro. Acid precipitates inhibited AChE activity in a concentration-dependant manner and $IC_{50}$ values of both acid precipitates were 0.53 mg/mL. The inhibition pattern was general non-competitive inhibition. The energetic parameters were also determined by dual substrate/temperature design. Both acid precipitates increased the values of Ea, ${\Delta}H,/;{\Delta}G$ and ${\Delta}H^{\ast}$ decreasing the value of ${\Delta}S$ for AChE. The results implied that the acid precipitates from I. obliquus increased the thermodynamic barrier, leading to the breakdown of ES complex and the formation of products as inhibitory mechanism.

• Journal of Life Science
• /
• v.30 no.2
• /
• pp.202-210
• /
• 2020

As the elderly population increases, it is becoming important to prevent and treat muscle loss caused by aging or disease. Steroidal androgen in the protein assimilation steroid (AAS) system is mainly used to induce muscle improvement, but it is well known that long-term or excessive doses of AAS result in various side effects, although they are prescribed for various muscle and weight loss treatments. Research is therefore underway to explore natural substances that promote muscle renewal with relatively few side effects. However, despite many studies on the improvement of skeletal muscle and the reduction of muscle disease using natural products, there is still a lack of significant clinical results and mechanism studies. The promotion of muscle regeneration through treatment with natural substances typically involves three mechanisms: positive control of the muscle modulating factor (MRF), activation of the protein synthesis mechanism, and inhibition of the protein breakdown mechanism. A study of plant extracts that are known to have muscle neoplasmic stimulation effects, such as black ginseng, plum, and nutmeg, as well as single substances derived from natural products, such as creatine, catechin, and several fatty acids, is therefore described. We also summarize the mechanisms that have been identified so far through which each of these extracts or single materials facilitates muscle regeneration and the signaling pathways that they mediate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.37-43
• /
• 2017

This review investigates the basic principle of physical interactions and failure mechanisms introduced in the materials and inner parts of semiconducting components under electromagnetic pulses (EMPs). The transfer process of EMPs at the semiconducting component level can be explained based on three layer structures (air, dielectric, and conductor layers). The theoretically absorbed energy can be predicted by the complex reflection coefficient. The main failure mechanisms of semiconductor components are also described based on the Joule heating energy generated by the coupling between materials and the applied EMPs. Breakdown of the P-N junction, burnout of the circuit pattern in the semiconductor chip, and damage to connecting wires between the lead frame and semiconducting chips can result from dielectric heating and eddy current loss due to electric and magnetic fields. To summarize, the EMPs transferred to the semiconductor components interact with the chip material in a semiconductor, and dipolar polarization and ionic conduction happen at the same time. Destruction of the P-N junction can result from excessive reverse voltage. Further EMP research at the semiconducting component level is needed to improve the reliability and susceptibility of electric and electronic systems.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.5 s.236
• /
• pp.663-670
• /
• 2005

DIN CK35 (JIS S35CK) steels have been used as a material in fuel pump blocks for marine engines. Failures in the inner surface of a drilling hole, due to the initiation of fatigue cracks have been frequently reported. However, the mechanism initiating these cracks and growths has not been clearly diagnosed yet. This study was conducted using a scraped fuel pump block, containing an initiated fatigue crack in the inner surface of a drilling hole. Initially, the cracks and fractured surfaces inside the block were investigated using an optical microscope and a SEM (Scanning Electron Microscope). In addition, microstructure observation, fatigue life test and fatigue crack growth test were performed using a specimen, which was taken from the same block. Results from these tests are summarized as follows; (1) The early crack in the block was supposed to occur inside the inner surface of the drilling hole. (2) The fatigue endurance of this material was about 330 Mpa. (3) The early crack was generated in the cavitations created by the breakdown of a big inclusion, or separation between the big inclusion and the base metal, in which the fundamental ingredients of the inclusion were C, 5, and Mn. (4) In order to prevent these types of failures, the suppression of inclusions inflow by improving the casting process, formation of fine inclusions by applying a heat treatment process, and coating of the surface of the drilling hole were required.

• Korean Journal of Materials Research
• /
• v.28 no.6
• /
• pp.349-354
• /
• 2018

Particle size reduction is an important step in many technological operations. The process itself is defined as the mechanical breakdown of solids into smaller particles to increase the surface area and induce defects in solids, which are needed for subsequent operations such as chemical reactions. To fabricate nano-sized particles, several tens to hundreds of micron size ceramic beads, formed through high energy milling process, are required. To minimize the contamination effects during high-energy milling, the mechanical properties of zirconia beads are very important. Generally, the mechanical properties of $Y_2O_3$ stabilized tetragonal zirconia beads are closely related to the mechanism of phase change from tetragonal to monoclinic phase via external mechanical forces. Therefore, $Y_2O_3$ distribution in the sintered zirconia beads must also be closely related with the mechanical properties of the beads. In this work, commercially available $100{\mu}m-size$ beads are analyzed from the point of view of microstructure, composition homogeneity (especially for $Y_2O_3$), mechanical properties, and attrition rate.

• Journal of Embryo Transfer
• /
• v.13 no.2
• /
• pp.179-190
• /
• 1998

Prolactin (PRL) surge in cycling rats at proestrous afternoon has previously been reported as an inducer of apoptotic cell death of luteal cells. This death-inducing action of PRL seeins unusual, because PRL can he categorized as a cell-survival factor, if other known physiological functions of PRL are taken into account. In this study, the apoptotic action of PRL was assessed in cultured cells prepared from rat luteal tissue and underlying molecular /cellular mechanism of PRL-induced luteolysis was analyzed. The latest crop of corpora lutea (CLs) were enucleated from rat ovaries at 18:00 h on the proestrous day before the next ovulation. Donor rats were pretreated with CB154, a dopamine agonist, in order to he exempted from the endogenous PRL surge. The harvested GLs were dispersed and cultured with or without PRL (2$\mu$g /ml) for 24 or 48 h. An addition of PRL to the culture medium changed the parameters indicative of cell death via apoptosis: a decrease in cell viability (MTT) and an increase in chromatin condensation. Most of the DNA breakdown in nuclei induced by PRL occurred in steroidogenic cells which were identified by 3$\beta$-HSD activity staining, and the number of 3$\beta$-HSD-positivecells were significantly decreased. Interestingly, most of the cells with an apoptotic nucleus adhered to one or more intact and seemingly non-steroidogenic cells. Because the expression of Fas has heen shown to be abundant in murine ovary, and Fas is known to have an exact physiological role in occurrence of apoptotic cell death, the membrane form-Fas ligand (rnFasL) was quantified in the cell lysate. An addition of PRL increased expression of mFasL. Moreover, an addition of concanavalin A (ConA), a T-cell specific activator, in place of PRL, enhanced the apoptotic parameters. Cumulatively, the apoptotic PRL action was addressed to cells unknown than steroidogenic lute~ cells. The most prohable candidate for the direct target cells is Tcells in the luteal tissue that can express mFasL in response to PRL.

• Journal of Nutrition and Health
• /
• v.27 no.4
• /
• pp.347-355
• /
• 1994

Indolo[3,2-b]carbazole(ICZ) is a potent Ah receptor agonist with biological activities similar in several respects to those of the potent environmental toxin, TCDD. ICZ is produced during the oilgomerization of indole-3-carbinol(I3C), a breakdown product of the glucobrassicin present in food plants of the Brassica genus. In the present study we examined ICZ levels in tissues and excreta of rats treated with I3C or dietary cabbage of established glucobrasicin content, and in feces of conventional and germfree rats fed on a basal diet, and of humans. We also examined the levels of cytochrome P4501A1 induction, as determined by the ethoxyresorufin ο-deethylase assay, in tissues of animals that received cabbage-supplemented diets, or which were treated with purified I3C or ICZ. Our findings indicated that incorporation of either homogenized or whole freeze-dried cabbage in the feed led to large increases(16-60 fold) in the levels of ICZ in the feces and lower gastrointestinal tract of rats. We observed that whereas ICZ is readily detectable at about the same levels(2.00$\pm$0.50 ppb) in the feces of conventional rats fed on a purified diet and in human feces, levels of ICZ in the feces of germfree animals fed on the basal diet were at the limits of detection(0.40$\pm$0.20 ppb), indication that gut bacteria are important for the production of ICZ from essential dietary constituents in the basal diet. We showed that in contrast to the near 7000-fold difference in CYP1A1 inducing potencies of ICZ and TCDD in cells in culture, their inducing potencies differ by only about an order of magnitude in rats. Nonetheless, the levels of ICZ remaining in livers twenty hours after I3C treatment appear too low to account for the induced activity. This result indicates that ICZ may be rapidly cleared from the liver or that substances other than, or in addition to, ICZ be responsible for the enzyme-inducing activity of orally administered I3C or its precursors.

• The Plant Pathology Journal
• /
• v.16 no.1
• /
• pp.1-8
• /
• 2000

Worldwide, rice blast, caused by Magnaporthe grisea (Hebert) Barr. (anamorph, Pyricularia grisea Sacc.), is one of the most economically devastating crop diseases. Management of rice blast through the breeding of blast-resistant varieties has had only limited xuccess due to the frequent breakdown of resistance under field conditions (Bonman etal., 1992; Correa-Victoria and Zeigler, 1991; Kiyosawa, 1982). The frequent variation of race in pathogen populations has been proposed as the principal mechanism involved in the loss of resistance (Ou, 1980). Although it is generally accepted that race change in M. grisea occurs in nature, the degree of its variability has been a controversial subject. A number of studies have reported the appearance of new races at extremely high rates (Giatgong and Frederiksen, 1968; Ou and Ayad, 1968; Ou et al., 1970; Ou et al., 1971). Various potential mechanisms, including heterokaryosis (Suzuki, 1965), parasexual recombination (Genovesi and Magill, 1976), and aneuploidy (Kameswar Row et al., 1985; Ou, 1980), have been proposed to explain frequent race changes. In contrast, other studies have shown that although race change could occur, its frequency was much lower than that predicted by earlier studies (Bonman et al., 1987; Latterell and Rossi, 1986; Marchetti et al., 1976). Although questions about the frequency of race changes in M. grisea remain unanswered, the application of molecular genetic tools to study the fungus, ranging from its genes controlling host specificity to its population sturctures and dynamics, have begun to provide new insights into the potential mechanisms underlying race variation. In this review we aim to provide an overview on (a) the molecular basis of host specificity of M. grisea, (b) the population structure and dynamics of rice pathogens, and (c) the nature and mechanisms of genetic changes underpinning virulence variation in M. grisea.

• Korean Journal of Materials Research
• /
• v.9 no.5
• /
• pp.509-514
• /
• 1999

Interest in the integrated capacitors, which make it possible to reduce the size of and to obtain improved electrical performance of an electronic system, is expanding. In this study, $Ta_2$O\ulcorner thin film capacitors for MCM integrated capacitors were fabricated on a Upilex-S polymer film by DC magnetron reactive sputtering and the effects of low temperature annealing at various atmospheres and substrate surface morphology on the capacitor characteristics were discussed. The low temperature($150^{\circ}C$) annealing produced improved capacitor yield irrespective of the annealing at mosphere. But the leakage current of the $O_2$-annealed film was larger than that of any other films. This is presumably mosphere. But the leakage current of the $O_2$-annealed film was larger than that of any other films. This is presumably due to the change of the $Ta_2$O\ulcorner film surface by oxygen, which was explained by conduction mechanism study. Leakage current and breakdown field strength of the capacitors fabricated on the Upilex-S film were 7.27$\times$10\ulcornerA/$\textrm{cm}^2$ and 1.0 MV/cm respectively. These capacitor characteristics were inferior to those of the capacitors fabricated on the Si substrate but enough to be used for decoupling capacitors in multilayer package. Roughness Analysis of each layer by AFM demonstrated that the properties of the capacitors fabricated on the polymer film were affected by the surface morphology of the substrate. This substrate effect could be classified into two factors. One is the surface morphology of the polymer film and the other is the surface morphology of the metal bottom electrode determined by the deposition process. Therefore, the control of the two factors is important to obtain improved electrical of capacitors deposited on a polymer film.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.4
• /
• pp.495-502
• /
• 2014

Fast recovery diodes (FRDs) were developed using the $p^{{+}{+}}/n^-/n^{{+}{+}}$ epitaxial layers grown by low temperature epitaxy technology. We investigated the effect of electrostatic discharge (ESD) stresses on their electrical and switching properties using current-voltage (I-V) and reverse recovery time analyses. The FRDs presented a high breakdown voltage, >450 V, and a low reverse leakage current, < $10^{-9}$ A. From the temperature dependence of thermal activation energy, the reverse leakage current was dominated by thermal generation-recombination and diffusion, respectively, at low and high temperature regions. By virtue of the abrupt junction and the Pt drive-in for the controlling of carrier lifetime, the soft reverse recovery behavior could be obtained along with a well-controlled reverse recovery time of 21.12 ns. The FRDs exhibited excellent ESD robustness with negligible degradations in the I-V and the reverse recovery characteristics up to ${\pm}5.5$ kV of HBM and ${\pm}3.5$ kV of IEC61000-4-2 shocks. Likewise, transmission line pulse (TLP) analysis reveals that the FRDs can handle the maximum peak pulse current, $I_{pp,max}$, up to 30 A in the forward mode and down to - 24 A in the reverse mode. The robust ESD property can improve the long term reliability of various power applications such as automobile and switching mode power supply.