• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.344-347
• /
• 2008

Ocean surface waves may be modified by ocean current and their observation may be severely distorted if the observer is on a moving platform with changing speed. Tidal current near a sill varies inversely with the water depth, and results spatially inhomogeneous modulation on the surface waves near the sill. For waves propagating upstream, they will encounter stronger current before reaching the sill, and therefore, they will shorten their wavelength with frequency unchanged, increase its amplitude, and it may break if the wave height is larger than 1/7 of the wavelength. These small scale (${\sim}$ 1 km changes is not suitable for satellite radar observation. Spatial distribution of wave-height spectra S(x, y) can not be acquired from wave gauges that are designed for collecting 2-D wave spectra at fixed locations, nor from satellite radar image which is more suitable for observing long swells. Optical images collected from cameras on-board a ship, over high-ground, or onboard an unmanned auto-piloting vehicle (UAV) may have pixel size that is small enough to resolve decimeter-scale short gravity waves. If diffuse sky light is the only source of lighting and it is uniform in camera-viewing directions, then the image intensity is proportional to the surface reflectance R(x, y) of diffuse light, and R is directly related to the surface slope. The slope spectrum and wave-height spectra S(x, y) may then be derived from R(x, y). The results are compared with the in situ measurement of wave spectra over Keelung Sill from a research vessel. The application of this method is for analysis and interpretation of satellite images on studies of current and wave interaction that often require fine scale information of wave-height spectra S(x, y) that changes dynamically with time and space.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.8
• /
• pp.501-507
• /
• 2015

In this paper, EPR (ethylene propylene rubber) insulation material was accelerated degradation test at $121^{\circ}C$, $136^{\circ}C$, $151^{\circ}C$, and experiment the typical EAB (elongation at break) at mechanical characteristics analysis. It is shown that the failure-time at the point of 50% of the initial value of Elongation rate to obtain the activation energy. The failure-time was shown each 5,219 hr, 3,165 hr, and 668 hr at three temperatures. In order to derive the activation energy, Arrhenius methodology was applied. Also, we got the Arrhenius plot from three accelerated temperatures. The activation energy values got 0.98 eV from EAB test. The experimental data were evaluated for estimating the probability density, and the suitable distribution by using statistical program MINITAB. It is shown that EAB data by the acceleration thermal degradation is most suitable for the Weibull distribution.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.6
• /
• pp.98-111
• /
• 2012

This study found the possibility of using cemeteries within the locality as field trip destination. A comparison between Korea and the United States of America's active progress has derived the difference and the implications. Therefore, this article found that the cemetery has sufficient resources based on experience-learning place within the community. Therefore, when the active educational program was developed; it gained more abundant resources for education, as well as provided more different educational opportunities for the students than now. As the result of comparison, the reason why the educational program is actively progressing in the American cemeteries is that a beautiful and fresh environment has been built up such as a park or garden in a cemetery and has been preserved as a healthy forest ecosystem. Furthermore, it is because they actively used the cemetery within a community as the subject. If our cemetery can be renovated and the funeral culture can be changed to break down the image of an avoidable unpleasant facility, it would play a role as a field for learning experience.

• Journal of Korea Water Resources Association
• /
• v.49 no.1
• /
• pp.51-60
• /
• 2016

The purpose of this study is to examine the control function of discharged flow due to the shape and plane arrangement of permeable submerged breakwater. For the discussion on it in detail, 3-dimensional numerical model based on PBM (Porous Body Model), which is able to simulate directly interaction of Fluid Permeable structure Seabed has been used to simulate water discharge in a NWT (Numerical Water Tank). To verify the applicability, LES-WASS-3D is analyzed comparing to the experimental result about propagation characteristics of dam-break wave through a permeable structure. Using the results obtained from numerical simulation, the effects of the shape and plane arrangement of submerged breakwater on reducing velocity and flow induction have been discussed related to the mean flow distribution and vertical distributions of horizontal velocities around ones.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.3
• /
• pp.641-648
• /
• 2013

ARP spoofing is a typical Internet attack, in which an attacker sends data by changing his's MAC address with the other's one. Currently, this attack is usually dealt with separating the attacking PCs infected with ARP spoofing virus, by keeping network devices investigating by the network manager. However, this manual process has some limitations in time and accuracy. This paper proposes a new network management system to replace the effort of network manager who has to keep on inspecting the network. Along with designing an ARP analyzer and a disconnection notifier and adding them into the existing network management system, the proposed system provides a basement to identify and notify the PC infected by an ARP spoofing virus with fast and high accuracy. As a result, it is expected to minimize the network break off and to make easy the network management.

• The KIPS Transactions:PartC
• /
• v.14C no.1 s.111
• /
• pp.87-94
• /
• 2007

In mobile ad hoc networks the most popular on demand routing protocols are the Dynamic Source Routing (DSR) protocol and the Ad hoc On demand Distance Vector (AODV) routing protocol. These and other representative standard routing protocols are designed to find and maintain only a single path. Whenever there is a link break on the active route, source node has to invoke a route discovery process from the beginning and it causes a lot of overhead. Multipath routing protocols, which can alleviate these problems by establishing multiple alternative paths between a source and a destination, are widely studied. In this paper we propose a node disjoint multipath discovery technique based on AODV local route discovery. This technique can find and build completely separated node disjoint multi paths from a source to a destination as many as possible. It will make routing more robust and stable.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.6
• /
• pp.387-396
• /
• 2014

Recently, there have been continuous efforts and progresses regarding the research on diverse network control and management platforms for SDN (Software Defined Networking). SDN is defined as a new technology to enable service providers/network operators easily to control and manage their networks by writing a simple application program. In SDN, incomplete or malicious programmable entities could cause break-down of underlying networks shared by heterogeneous devices and stake-holders. In this sense, any misunderstanding or diverse interpretations should be completely avoided. This paper proposes a new framework for SDN application verification and a prototype based on the formal method, especially with process algebra called pACSR which is an extended version of Algebra of Communicating Shared Resources (ACSR).

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.863-866
• /
• 1999

(Ba,Sr)$TiO_3$ thin films have attracted groat interest as new dielectric materials of capacitors for ultra-large-scale integrated dynamic random access memories (ULSI-DRAMs) such as 1 Gbit or 4 Gbit. In this study, inductively coupled $BCl_3/Cl_2$/Ar plasmas was used to etch (Ba,Sr)$TiO_3$ thin films. RF power/dc bias voltage = 600 W/-250 V and chamber pressure was 10 mTorr. The $Cl_2/(Cl_2+Ar)$ was fixed at 0.2, the (Ba,Sr)$TiO_3$ thin films were etched adding $BCl_3$. The highest (Ba,Sr)$TiO_3$ etch rate is 480$\AA/min$ at 10 % $BCl_3$ adding to $Cl_2$/Ar. The characteristics of the plasmas were estimated using optical emission spectroscopy (OES). The change of Cl, B radical density measured by OES as a function of $BCl_3$ percentage in $Cl_2$/Ar. The highest Cl radical density was shown at the addition of 10% $BCl_3$ to $Cl_2$/Ar. To study on the surface reaction of (Ba,Sr)$TiO_3$ thin films was investigated by XPS analysis. Ion enhancement etching is necessary to break Ba-O bond and to remove $BaCl_2$. There is a little chemical reaction between Sr and Cl, but Sr is removed by physical sputtering. There is a chemical reaction between Ti and Cl, and Tic14 is removed with ease. The cross-sectional of (Ba,Sr)$TiO_3$ thin film was investigated by scanning electron microscopy (SEM), the etch slope is about $65\;{\sim}\;70$.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.16 no.3
• /
• pp.83-90
• /
• 2008

The ultrasonic pre-treatment of sewage sludge (SS) was investigated to increase soluble organic material and to improve anaerobic biodegradability. Ultrasonic disintegration of SS increased the amount of soluble chemical oxygen demand (SCOD), protein and carbohydrate concentrations whereas particle size decreased due to the break-up of cell walls. In terms of anaerobic biodegradability, ultrasonic pre-treatment enhanced the anaerobic biodegradation of SS, leading to the methane gas production improvement. Biochemical methane potential (BMP) of SS was 211.3 ml $CH_4/gVS$ whereas BMP after ultrasonic pre-treatment was 294.3 ml $CH_4/gVS$. The improvement in BMP for SS treated with ultrasonic disintegration was as high as 40 %. This result indicated that disintegration of SS was efficient for enhancing anaerobic biodegradability.

• Tunnel and Underground Space
• /
• v.25 no.3
• /
• pp.293-302
• /
• 2015

Thin Spray-on Liner (TSL) has been considered as a new rock support to replace shotcrete as well as wire mesh. However, the development of its original production technology is highly in demand since it is not open to the public. Therefore, two kinds of powder-type TSL prototypes were developed as the first development stage. Then, their mechanical properties were experimentally compared with those of a two-component foreign TSL material including both of liquid and powder components. From a series of experiments, the first TSL prototype mixing condition satisfied every TSL performance requirements specified by EFNRAC (2008), and showed much higher tensile and bond strengths than those of the two-component foreign TSL, even though the other TSL prototype cannot be used as a support member since its elongation at break is much lower than its corresponding EFNARC (2008) performance criterion. In addition, a further study to increase the ductility of the first TSL prototype might be necessary to guarantee its higher applicability to field conditions.