DOI QR코드

DOI QR Code

Development of a Powder-type Thin Spray-on Liner and Its Performance Evaluation at Different Curing Ages

분말형 박층 뿜칠 라이너 시작품의 제작과 성능평가

  • 장수호 (한국건설기술연구원 지반연구소) ;
  • 이규필 (한국건설기술연구원 지반연구소) ;
  • 한진태 (한국건설기술연구원 지반연구소) ;
  • 최순욱 (한국건설기술연구원 지반연구소) ;
  • 황귀성 (실크로드티앤디 연구개발팀) ;
  • 최명식 (크로드티앤디)
  • Received : 2015.06.08
  • Accepted : 2015.06.23
  • Published : 2015.06.30

Abstract

Thin Spray-on Liner (TSL) has been considered as a new rock support to replace shotcrete as well as wire mesh. However, the development of its original production technology is highly in demand since it is not open to the public. Therefore, two kinds of powder-type TSL prototypes were developed as the first development stage. Then, their mechanical properties were experimentally compared with those of a two-component foreign TSL material including both of liquid and powder components. From a series of experiments, the first TSL prototype mixing condition satisfied every TSL performance requirements specified by EFNRAC (2008), and showed much higher tensile and bond strengths than those of the two-component foreign TSL, even though the other TSL prototype cannot be used as a support member since its elongation at break is much lower than its corresponding EFNARC (2008) performance criterion. In addition, a further study to increase the ductility of the first TSL prototype might be necessary to guarantee its higher applicability to field conditions.

박층 뿜칠 라이너(TSL)는 숏크리트와 철망을 대체하는 새로운 암반 지보재로서 고려되고 있다. 하지만 아직까지 TSL의 핵심 제작기술이 공개되지 않은 관계로 독자적인 TSL 개발이 요구되고 있다. 따라서 본 연구에는 TSL의 개발을 위한 첫 번째 단계로서, 2가지의 경제적인 분말형 TSL 시작품 배합조건들을 도출하였고 이들을 액상 및 분말 재료가 혼합되는 2성분 외국산 TSL의 역학적 성능들과 실험적으로 비교하였다. 실험결과, 1가지 TSL 시작품 배합조건은 파괴 시의 신장률이 낮게 나타나 지보재로서의 활용이 어려운 것으로 나타났으나, 나머지 TSL 시작품 배합조건은 기존 외국산 TSL보다 큰 인장강도와 부착강도를 발현하는 등 우수한 성능을 나타내었으며 유럽 EFNARC(2008)의 모든 성능기준을 만족하여 지보재로서 활용이 가능한 것으로 검증되었다. 단, 외국산 2성분 TSL과 비교할 때 TSL 시작품의 연성을 추가적으로 향상시키기 위한 보완이 필요한 것으로 나타났다.

Keywords

References

  1. Ahn, Taesang, 2011, Thermal and mechanical studies of Thin Spray-on Liner (TSL) for concrete tunnel linings, Ph.D. dissertation, University of Western Ontario, Canada.
  2. ASTM, 2010, Standard Test Method for Tensile Properties of Plastics, D638-10.
  3. Archibald, J.F., 2004, Chapter 4. canadian laboratory and field testing, Surface Support in Mining, Y. Povin, D. Stacey and J. Hadjigeorgiou (eds), Australian Centre for Geomechanics, 73-87.
  4. Chang, S.-H., G.-P. Lee, J.-T. Han, Y.-T. Park, S.-W. Choi, G.-S. Hwang and M.-S. Choi, 2013, An Experimental Study on the Evaluation of Early-Age Mechanical Properties of Polymer-Based Thin Spray-on Liners, Tunnels & Underground Space, Vol. 23, No. 5, 413-427. https://doi.org/10.7474/TUS.2013.23.5.413
  5. EFNARC, 2008, Specification and Guidelines on Thin Spray-on Liners for Mining and Tunnelling.
  6. Han, J.-T., G.-P. Lee, Y.-T. Park, S.-W. Choi, G.-S. Hwang, M.-S. Choi and S.-H. Chang, 2013, An experimental study on bonding and bearing capacities of thin spray-on liner to evaluate its applicability as a tunnel support member, J. of Korean Tunn Undergr Sp Assoc, Vol. 15, No. 6, 571-583. https://doi.org/10.9711/KTAJ.2013.15.6.571
  7. ITAtech, 2013, ITAtech design guidance for spray applied waterproofing membranes, ITAtech Activity Group Lining and Waterproofing, ITAtech Report No. 2.
  8. Lau, V., S. Saydam, Y. Cai and R. Mitra, 2008, Laboratory Investigation of Support Mechanism for Thin Spray-on Liners, Proceedings of the 12th International Conference of International Association for Computer Methods and Advances in Geomechanics(IACMAG), Goa, India, 1381-1388.
  9. Povin, Y., D. Stacey, J. Hadjigeorgiou and H. Yilmaz, 2004, Part 1: Thin Spray-on Liners(TSLs)-A Quick Reference Guide, Surface Support in Mining, Y. Povin, D. Stacey and J. Hadjigeorgiou(eds), Australian Centre for Geomechanics, 3-43.
  10. Roberts, R., 2001, Time to look below the surface of membranes, Australian Mining Monthly, August, 62-63.
  11. Saydam, S., 2008, Ground Control - Use of Liner Support in Mining, Presentation file, MINE4300 - GEOTECHNICAL ENGINEERING, School of Mining Engineering, University of New South Wales.
  12. Stern, J., R.J. Gerber, A.T. Harrison and P.H. Ferreira, 2007, Investigation of the characteristics of thin spray liners(TSL's) and their use as an additional support medium in block cave mining, Proceedings of the 1st international Symposium on Block and Sub-level Caving, South Africa, 217-238.
  13. Tannant, D.D., 2001, Thin Spray-on Liners for Underground Rock Support, Proceedings of the 17th International Mining Congress and Exhibition of Turkey - IMCET 2001, 57-73.
  14. Yilmaz, H., 2007, Shear-bond strength testing of thin spray-on liners, The Journal of The Southern African Institute of Mining and Metallurgy, Vol. 107, 519-530.

Cited by

  1. Numerical study on contact behavior of TSL (Thin Spray-on Liner) vol.17, pp.6, 2015, https://doi.org/10.9711/KTAJ.2015.17.6.665
  2. A study on drainage system of the room-and-pillar underground structure considering groundwater conditions vol.17, pp.6, 2015, https://doi.org/10.9711/KTAJ.2015.17.6.675
  3. An Experimental Study on Fundamental Properties of a Sprayable Waterproofing Membrane vol.26, pp.3, 2016, https://doi.org/10.7474/TUS.2016.26.3.220
  4. Development and Performance Evaluation of a Two-component Thin Spray-on Liner to Guarantee Its Homogeneous Qualities and to Reduce Dust vol.26, pp.5, 2016, https://doi.org/10.7474/TUS.2016.26.5.441