• Computational Structural Engineering
• /
• v.11 no.1
• /
• pp.153-160
• /
• 1998

A small break loss of coolant accident is postulated as a pressurized thermal shock accident in this study. From the temperature and pressure histories of coolant, distributions of the temperature and stress in a vessel wall are analytically calculated. The stress intensity factor and fracture toughness of the vessel wall are determined at the crack tip using the ASME code method and they are compared to check if cracking is expected to occur during the transient postulated. The maximum allowable reference nil-ductility transition temperatures are determined for various crack sizes and the results are discussed.

• Macromolecular Research
• /
• v.10 no.1
• /
• pp.24-33
• /
• 2002

Interfacial and microfailure properties of carbon fiber/epoxy composites were evaluated using both tensile fragmentation and compressive Broutman tests. A monomeric and two polymeric coupling agents were applied via the electrodeposition (ED) and the dipping applications. A monomeric and a polymeric coupling agent showed significant and comparable improvements in interfacial shear strength (IFSS) compared to the untreated case under both tensile and compressive tests. Typical microfailure modes including cone-shaped fiber break, matrix cracking, and partial interlayer failure were observed under tension, whereas the diagonal slipped failure at both ends of the fractured fiber appeared under compression. Adsorption and shear displacement mechanisms at the interface were described in terms of electrical attraction and primary and secondary bonding forces.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2017.07a
• /
• pp.135-136
• /
• 2017

When driving at night time environment, the whole body of transports does not visible to us. Due to lack of light conditions, there are only two options, which is clearly visible their taillights and break lights. To improve the recognition correctness of vehicle detection, we present an approach to vehicle detection and tracking using finding contour of the object on binary image at night time. Bilateral filtering is used to make more clearly on threshold part. To remove unexpected small noises used morphological opening. In verification stage, paired tail lights are tracked during their existence in the ROI. The accuracy of the test results for vehicle detection is about 93%.

• Proceedings of the KWS Conference
• /
• 2005.06a
• /
• pp.19-21
• /
• 2005

The ball shea. tests for ball grid array (BGA) and flip chip packages were carried out with different displacement rates to find out the optimum condition of the displacement rate for this test. The BGA packages consisted of two different kinds of solder balls (eutectic Sn-37wt.%Pb and Sn-3.5wt.%Ag) and electroplated Au/Ni/Cu substrate, whereas the flip chip package consisted of electroplated Sn-37Pb solder and Cu UBM. The packages were reflowed up to 10 times, or aged at 443 K up to 21 days. The variation of the displacement rate resulted in the variations of the shear properties such as shear force, displacement rate at break, fracture mode and strain rate sensitivity. The increase in the displacement rate led to the increase of the shear force and brittleness of solder joints.

• Proceedings of the KWS Conference
• /
• 2005.06a
• /
• pp.367-369
• /
• 2005

For the purpose of the optimization or the break through of production processes, it is essential to understand or theoretically interpret dominant mechanisms of the processes, and further more, archive them. and utilize them combining some of them which are needed. Especially in the technology for micro- or nano-scaled objects, adhesion phenomenon is no more negligible, because the adhesion force is proportional to the size of objects meanwhile gravity force is proportional to the third power of it. Author has been working about the mechanisms for micro-assembly processes, which include joining processes and manipulation processes. In the present paper, the strategy and the progress to establish the micro-assembly technology archive are introduced. Some of the mechanisms are introduced with related basic approaches to the adhesion phenomena. Also it will be expressed that our data base project for the surface and interfacial energies is strongly related to these basic approaches.

• Journal of the military operations research society of Korea
• /
• v.18 no.2
• /
• pp.181-191
• /
• 1992

In this paper in order to prevent break of operation of equipments resulted from the delay of parts supply, the continuous review(Q, r) inventory model with probabilistic lead time is developed. If the lead tire is random varivable, the cycle also is stochastic. Then it is not easy to obtain the total cost equation of this inventory model. Therefore it is assumed that one cycle is the interval of reorder points. When the lead time is assumed to have exponential probability distribution, the lot-size and reorder point which minimize total cost are obtained. And as the lead time increases, the order quantity and the total cost are greater, but the reorder point increases by a certain point of time and then decreases.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1390-1395
• /
• 2004

Recently, the load increasement and new regenerative systems of electrified railway system make it a difficult to distinguish between the load current and fault current. The failure of traction system perhaps causes over-current to flow. The high current can collapse other railway systems. If failures of the traction system takes place, the failures are detected and protected lest it should provoke high current flow. The over current from such a traction system failure permit to charge high tension voltage and produces high temperature arc, voltage instability, current cutting, and break down railway systems. The traction system failures detect and the system has to immediately cut off from over-current flow. To isolate the failure, the system can distinguish failure current from current flows. It forces us to adapt such as a new intelligent protection system. The protective system in traction system play a role of detecting and isolating failure points. In this paper, we proposed intelligent algorithm for discriminating normal and abnormal situation instead of the system being operated abnormally.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.3
• /
• pp.31-37
• /
• 2010

During typhoon periods, coastal regions are often directly flooded by typhoon-surges. There are also many cases where coastal regions are inundated by river inundations or dam breaks. However, most studies on coastal flooding by typhoons have been restricted to cases involving the sea. Flooding by river inundation has been excluded in those studies. Usually ocean numerical models are not applied to river flow because the governing equations for ocean flow and river flow are not the same. For a coastal flooding simulation with river inundation, POM, the three-dimensional numerical ocean model, was applied to the popular river flow problems, dam-break problem, and flows over a spillway. The simulated results showed good agreement with other numerical simulations and measured data, suggesting the possibility of using POM in coastal flooding simulations involving direct coastal surges and river inundations.

• Journal of Korean Institute of Industrial Engineers
• /
• v.23 no.2
• /
• pp.275-288
• /
• 1997

The container transportation problem is a kind of generalized pickup and delivery problem(GPDP), and a typical NP-hard problem of which polynomial algorithm has not yet been developed. In this problem, trucks have to transport containers from origins to destinations, while have to satisfy several restrictions such as request time, cargo closing time, driver's break time. In this paper, we present a straightforward heuristic and a user-interactive truck dispatching system which supports decision makers.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1330-1332
• /
• 2000

In general, the expected life of power semiconductor elements is known for semi-permanent, but actual characteristics are changed according to the such environment conditions obviously because of using time or operating condition. Specially, in case of using at the power plant it is very important to sustain reliability for power semiconductor which it affect to stop operating condition as deterioration or break. Therefore, we need to apply maintenance technics to got the reliability which is a prediction method of life cycle. This paper shows the result of the analyzed data for element characteristic and effects used practically and we had developed the effective equipment which for diagnostic the semiconductor performance.