• Strategy21
• /
• s.39
• /
• pp.163-197
• /
• 2016

The completion of Jeju Naval Base on February 2016 made the Republic of Korea Navy(ROKN) review the size and role of the Maritime Task Flotilla(MTF). The new strategic environment for the 12st century and the new challenges require the Navy to counter North Korea's provocations and prevent potential enemy's threat. The Navy is also required to take part in the variety of international roles and missions commensurated with Korea's global status to maximize the national interest. Despite these changes, Korea's military construction concept is still unable to break away from the old paradigm of the North Korean threat largely centered. In order to develop the current MTF into the Task Group with the construction of Jeju Naval Base, the Navy must newly not only establish new force development plan and fleet management concepts but also go to persuade and convince policy decision makers. To this end, the following efforts should be promoted. First, the ROK Navy steps up efforts in order to share with the Task Group's vision and strategy. The Navy should also provide the size and structure as well as the missions and roles of the Task Group to react to new maritime security environment. Second, the Navy analyse the MTF's ability and what is required and necessary to perform its duty. After that, it must set out the direction of the Task Group's force development. Third, the current missions and roles of the MTF should be re-established to respond various threats. Finally, accommodating of new technology to the MTF should intensify its strengths. The ROK Navy has a mixed force structure consisting of three fixed- base fleets and a MTF. The fixed base fleet has a passive force to defend and protect its own sea areas, but the MTF should actively not only counter North Korea's threats, including ballistic missiles, but also fight potential threats and takes international missions as a primary task force. However, the MTF has a limited capability to accomplish given missions and long-range operations, and thus, the ROK Navy is strongly required to construct the Task Group.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.3
• /
• pp.249-259
• /
• 2009

Puroindoline alleles, grain characteristics, milling performances and physical properties of flour of 22 Korean wheat cultivars were evaluated to determine the influence of puroindolines genotypes on grain and flour characteristics and to provide useful information for improving milling and end-use quality in Korean wheat breeding programs. Nine Korean wheat cultivars carried with Pina-D1a/Pinb-D1a, 11 cultivars had Pina-D1a/Pinb-D1b and 2 cultivars were Pina-D1b/Pinb-D1a. Korean wheats carrying with Pina-D1a/Pinb-D1a genotypes showed lower test weight and thousand kernel weight, area and roundness of grain and hardness index in grain characteristics, lower flour yield and higher proportion of break flour in milling performances and lower average particle size of flour, ash and damaged starch content, water retention capacity, yellowness-blueness and higher lightness of flour than wheats with Pina-D1a/Pinb-D1b or Pina-D1b/Pina-D1a genotypes. Pina-D1a/Pinb-D1b genotypes showed lower 1000-kernel weight, grain area, higher average of particle size of flour, higher ash and damaged starch content than Pina-D1b/Pina-D1a genotypes. There was no difference in hardness index of grain, milling performances, flour color between Pina-D1a/Pinb-D1b and Pina-D1b/Pina-D1a genotypes. These results could present the information to improve milling quality and physical properties of flour in Korean wheat breeding programs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1716-1729
• /
• 2010

In this paper, we deal with a hierarchical ring-mesh optical network design problem. The objective is to minimize the total cost of optical add-drop multiplexers (OADMs) handling intra-ring traffic, optical cross-connects (OXCs) handling inter-ring traffic, and cabling cost among OADMs and among OXCs, while satisfying intra-ring and inter-ring capacities. We develop an integer programming (IP) formulation for the problem and devise some cutting planes that partially break the symmetry of rings. Dealing with the inherent computational complexity of the problem, we devise an effective heuristic procedure that finds a good quality feasible solution within reasonable computing times. Computational results demonstrate the efficacy of the proposed solution procedure; the developed symmetry breaking inequalities significantly reduce the computing time to find an optimal solution for small size problems, and the heuristic procedure finds a better feasible solution than that CPLEX, a commercial optimization software, finds for large size problems.

• Journal of Environmental Science International
• /
• v.30 no.1
• /
• pp.77-85
• /
• 2021

This study was carried out to establish optimal conditions for breaking dormancy of Agastache rugosa O. Kuntze seeds. A series of experiments according to seed maturity and treatment with plant growth regulators were performed to improve germination percentage and synchronize germination of the seeds. In addition, it was conducted to test whether the useful effect of seed treatment before sowing leads to healthy seedling and early vigorous growth. The average seed size was 1.85 mm (length) × 0.82 mm(width). The seed size was much smaller than other vegetable seeds. Seeds colorappeared dark brown, the shape of the seeds was oval and the weight of 1,000seeds was 352.8 mg. The optimum germination temperature was 22℃. Light exposure during germination did not affect germination promotion, suggesting that A. rugosa seeds are a kind of dark germinating seeds. Seed dormancy lasted for 40 days after harvesting, and GA3 treatment of dormant seeds could break dormancy. There were significant differences in germination percentage and rate according to the maturity of seeds. The germination percentage of mature seeds was 10 - 18% higher than that of immature seeds, and germination rate was 2 days faster. GA3 treatment during growth regulator treatment improved germinability, but BAP or ethephone treatment did not. The optimal growth regulator concentration of for germination was the combination treatment of 100 mM GA3 ＋ 100 mM BAP.

• Korean Journal of Radiology
• /
• v.2 no.2
• /
• pp.75-79
• /
• 2001

Objective: To evaluate the biodurability of the covering material in retrievable metallic stents covered with polycarbonate polyurethane. Materials and Methods: Using a peristaltic pump at a constant rate of 1ml/min, bile was recirculated from a reservoir through a long tube containing four stents. Each of these was removed from the system every two weeks and a radial tensile strength test and scanning electron microscopy (SEM) were performed. Each stent, removed at 2, 4, 6 and 8 weeks, was compared with a control stent not exposed to bile juice. Results: Gross examination showed that stents were intact at 2 weeks, but at 4, 6 and 8 weeks cracks were observed. The size of these increased gradually in accordance with the duration of exposure, and at 8 weeks several large holes in the polyurethane membrane were evident. With regard to radial tensile strength, extension and peak load at break were 84.47% and 10.030 N/mm, 54.90% and 6.769 N/mm, 16.55% and 2.452 N/mm, 11.21% and 1.373 N/mm at 0, 2, 4 and 6 weeks, respectively. Scanning electron microscopy at 2 weeks revealed intermittent pitting and cracking, and examination at 4, 6 and 8 weeks showed that the size of these defects was gradually increasing. Conclusion: When the polyurethane membrane was exposed to bile, biodegradation was first observed at week two and increased gradually according to the duration of exposure.

• Journal of Forest and Environmental Science
• /
• v.23 no.1
• /
• pp.11-19
• /
• 2007

This study was designed to analyze the economic efficiency that is needed to develop and make practical application of a mobile carbonization apparatus, which are able to make wood charcoals and pyroligneous liquid at the logging field with debris. B/C ratio was employed to make an economic analysis, and sensitivity analysis with respect to change in price and interest rates also was made. Cylindrical type is the proper type for the mobile carbonization apparatus, when important factors such as handling capacity, a carbonization time, quality of products and assembling ability were considered. It weighs 400 kg, and a three-step fold-up equipment. The size of 2 (diameter) by 2.4 m (height) carbonization equipment required 1,500 kg wood debris per batch. A forty-eight to fifty-two carbonization time produced 300 kg of wood charcoal and $45{\ell}$ of pyroligneous liquid. The average life span of the apparatus was 5 years. If the private enterprise operated 100 batch, 80 batch, and 70 batch with one apparatus, the B/C ratio of them was greater than 1, indicating that the production is economically feasible. The period to achieve a break-even point required to be 4 years in case of 100 and 80 batches to 5 years in case of 70 batch. But the private enterprises should operate at least two apparatus for the profits. Also, if the production was to be profitable, the prices of wood charcoals and pyroligneous liquid should be at least 750 won per kg and 700 won per liter.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.6
• /
• pp.431-441
• /
• 2003

This paper presents the design of 32 bit microprocessor for a sequence control using a field programmable gate array(FPGA). The microprocessor was designed by a VHDL with top down method, the program memory was separated from the data memory for high speed execution of sequence instructions. Therefore it was possible that sequence instructions could be operated at the same time during the instruction fetch cycle. In order to reduce the instruction decoding time and the interface time of the data memory interface, an instruction code size was implemented by 32 bits. And the real time debug operation was implemented for easeful debugging the designed processor with a single step run, PC break point run, data memory break point run. Also in this designed microprocessor, pulse instructions, step controllers, master controllers, BM and BCD type arithmetic instructions, barrel shift instructions were implemented for sequence logic control. The FPGA was synthesized under a Xilinx's Foundation 4.2i Project Manager using a V600EHQ240 which contains 600,000 gates. Finally simulation and experiment were successfully performed respectively. For showing good performance, the designed microprocessor for the sequence logic control was compared with the H8S/2148 microprocessor which contained many bit instructions for sequence logic control. The designed processor for the sequence logic showed good performance.

• Applied Chemistry for Engineering
• /
• v.7 no.3
• /
• pp.504-510
• /
• 1996

Low-density polyethylene(LDPE)/Linear low-density polyethylene(LLDPE) blends were prepared by the compositional quenching process, a new morphology control method. The blends were characterized in terms of melting and crystallization behavior and mechanical properties. The results were compared with those of mechanically blended and solution blended samples. From DSC experiments, it was found that the melting temperatures and crystallization temperatures of the blends were dependent on the blending methods. In thermal property, LDPE/LLDPE blends prepared by compositional quenching process were similar to the blends prepared by solution blending but different from the blends prepared by mechanical blending. This result is explained to be due to the domain size dispersed in the matrix. The elongation-at-break and tensile strength of the samples blended by compositional quenching showed similar to those of the samples blended by solution blending method but larger than those of samples prepared by mechanical blending. Also, the Young's modulus showed the same trends as elongation-at-break. The tensile strength of the blends prepared by compositional quenching was not as high as the samples prepared by the other two blending methods.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.5 no.5
• /
• pp.58-66
• /
• 2002

We present a planting plan of the buffer-forest belts created at the boundary area of the waste landfill site which is located in the coastal area of Kyubg-Gi province. In order to form a proper section of ground soil excavated from the sea and a forest which shows a distinction of the vegetation stratification, the planting plan with trees, sub-trees, shrubs, and seedlings (produced at a sprout cultivation place) is devised with an adjustment of planting density. 1. The preparation of mounding is required for planting at a waste landfill site. We first estimate an economical and efficient banking height together with the quantity of soil, and prepare a planting ground with excavated ground soil for the consideration of soil recycling. On the planting ground a banking with a height of 1.5-2m is produced by self-supported soil, playing a role in a salt blocking and an irritation layer of planting. Finally, an additional banking with a height of 2m is produced by qualified vegetation soil, forming a vegetation section with a total height of 6m. 2. Since the planning site is located in the border, the planting area is composed of two regions : one is an inclined face (slope 1 : 3) toward the inside of the landfill site and the other is an inclined face (slope 1 : 4) toward the inland. The buffer planting in the former (latter) region consists of wind break forest (mixed-landscape forest) within a width of less than 35m. 3. Based on the data obtained from the literatures and the investigation of local plants, we choose the 21 plant species (such as Pinus thunbergii, Pinus densiflora, Sorbus alnifolia, Albizzia julibrissin and etc.) and the additinal 7 species which are grown at a sprout cultivation palce of the SUDOKWON landfill site (Rosa rugosa, Quercus acutissima, Prunus armeniaca var. ansu., and etc.). Sub-trees with a height of above 2.5m and seedlings are planted with an interval of $1.5{\times}1.5m$ ($0.45roots/m^2$) and $0.5{\times}0.5m$ ($4roots/m^2$), respectively. Here, both trees exhibit communities planting with more than three rows. Shrubs are planted with $9-16roots/m^2$, depending on their size. Since this case study provides a reference of the planting beds as well as a planting plan at the SUDOKWON landfill site, it is not sufficient for the present plan to be utilized for the formation of buffer-forest belts which are used for the analysis of environmental factor and the reduction of environmental pollutants in the sea waste landfill site. Thus, further studies with the ecological basis are demanded for the environment planting restoration in the sea waste landfill site.

• 한국해양학회지
• /
• v.27 no.4
• /
• pp.277-289
• /
• 1992

Kyeonggi Bay, a macrotidal coastal embayment in the Yellow Sea coast of central korea, is fringed by vastly developed tidal flats. About 400 surface sediment samples were collected from the intertidal and subtidal zones of Kyeonggi Bay for a study of the sediment distribution pattern and the surface sediment characteristics of this environment. The kyeonggi Bay surface sediment becomes progressively finer in the shoreward direction, from offshore sand to shoreward silty sand and sandy silt. This shoreward-fining trend is repeated again on the tidal flat and, as a consequence, a grain-size break occurs near the low-water line which separates the intertidal area from the subtidal one. The intertidal and subtidal sediments differ from each other in textural characteristics such as mean grain size and skewness and this can be interpreted to result from differences in hydraulic energy and morphology between the two environments. The mineral and chemical compositions of the Kyeonggi Bay sediments are largely controlled by the sediment grain size. Smectite was nearly absent in the clay mineral assemblage of Kyeonggi Bay sediment. The contents of Co, Cu and Ni were high in the Banweol tidal flat, which suggests a continuous process of accumulation of these metals. the intertidal environment appears to respond rapidly to artificial coastal modifications, the effects of which should be taken into consideration when planning a dam construction or coastal reclamation.