• Macromolecular Research
• /
• v.17 no.5
• /
• pp.289-295
• /
• 2009

Low viscosity aromatic hyperbranched polyester epoxy resin (HTBE) was synthesized by the reaction between epichlorohydrin (ECH) and carboxyl-end hyperbranched polyester (HTB) which was prepared from inexpensive materials $A_2$ (1,4-butanediol glycol, BEG) and $B_3$ (trimellitic anhydride, TMA) by pseudo one-step method. The molar mass of the HTB was calculated from its acid value by "Recursive Probability Approach". The degree of branching (DB) of the HTB was characterized by model compounds and $^1H$ NMR-minus spectrum technology, and the DB of the HTB was about $0.47{\sim}0.63$. The viscosity and epoxy equivalent weight of the HTBE were $3,600{\sim}5,000\;cp$ and lower than 540 g/mol respectively. The reaction mechanism and structure of the $AB_2$ monomer, HTB and HTBE were investigated by MS, $^1H$ NMR and FTIR spectra technology. The molecular size of HTBE is under 8.65 nm and its shape is ellipsoid-like as determined by molecular simulation.

• The Korean Journal of Ecology
• /
• v.14 no.3
• /
• pp.327-343
• /
• 1991

Clonal growth and rhizome architecture of calmagrostis epigeios, were studied in a 15-year old coastal reclamed land. As c. epigeios patch grew from center to margin radially over time, concentric annuli were added. the radial increases of the mature patch were 80~130cm/yr. the patch ages of c. epigeios estimated by relationships between the diameter and is radial increament, were 1~6year old. There were the marked variations of density, phytomass, shoot height and inflorecence frequency with increasing age of rhizome system within the patch. the maximum performance occurred at 2-year-old concentric annuli of the patch. The growth phasic continuum with aging was divided into 5 grwth phases ; pioneer, building, matyre, senile and degenerate. The rhizome aging had a more significant effect on the inflorescence frequency than on the other attributes. new rhizomes tended to diverge from the direction of the parent ramet by sympodial growth. in a 1-year-old patch, average length of rhizome segment was 7cm, average number of internode was 6, and the tillering frequency was 27%. The tillering in the early stage resultd in the increase of shoot density and the producation of multibranching rhizome. as the result of that, circular patchwas formed in a year. The branching structure based on such facts was represented graphically in branching degree of 60 and 100. therefore, c. epigeios with clonal growth may establish and grow vigorously earlier than other glycophytes in high salt conditions such as the coastal reclaimed land.

• Fibers and Polymers
• /
• v.4 no.3
• /
• pp.107-113
• /
• 2003

The branched polypropylene (b-PP) was prepared by melt blending process with initiator, antioxidant, and functional monomers to improve the melt strength through the melt grafting. The melt flow index (MFI) of the b-PP was increased with increasing the initiator content. On the introduction of the alkylamine as the branching agents the MFI of the b-PP was increased, while that of the b-PP with the pentaerythritol triacrylate (PT) was decreased. It may be caused by the chain scission of the i-PP backbone due to the reduced thermal stability of the i-PP on the melt blending. The MFI of the b-PP without the antioxidant was increased due to the chain scission occurred during the melt processing, while on the introduction of the antioxidant, the MFI of the b-PP was decreased. The crystallization temperature of the b-PP was higher than that of PP, which was attributed to the branched chain structure. It was found that the PT was the most effective functional monomers for enhancing the melt properties of the b-PP.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.114-115
• /
• 2006

We investigated the effects of annealing on the rearrangement of H-bonding structure and its influence on the thermal and rheological properties of $2^{nd}\;and\;4^{th}$ pseudo-generation aliphatic hyperbranched (HB) polyesters based on 2,2-bis(methylol)propionic acid. During annealing of amorphous HB polyesters, the structure becomes more ordered as a consequence of multiple H-bonds formation between linear sequences. Structure ordering is more pronounced for the lower pseudo-generation HB polyester with low molar mass, low degree of branching and incompletely reacted core hydroxyl groups which greatly increases the possibility for multiple H-bond interactions.

• Polymer(Korea)
• /
• v.36 no.2
• /
• pp.245-250
• /
• 2012

Branched polypropylenes (PP) with long chain branch were prepared by solid state reaction with three different branching agent of 0.3 wt% content. The chemical structures, non-isothermal crystallization behavior and complex viscosity of the branched PP were investigated by FTIR, DSC, optical microscope, and dynamic rheological measurement. The chemical structure of the branched PP was confirmed by the existence of =C-H stretching peak of the branching agent at 3100 $cm^{-1}$. There was no distinct change in melting temperature in case of PP-D-0-3 and PP-F-0-3, but PP-H-0-3 indicated a decrease in melting temperature. The decrease in melting temperature was interpreted by the fact that the degradation reaction of PP was more dominant than branched reaction, and confirmed by a decrease in complex viscosity. The non-isothermal crystallization behavior of the branched PP was analyzed using by Avrami equation. The Avrami exponent of PP was 3, and the values of the branched PP with DVB and FS were below 3. The activation energy of PP calculated by Kissinger method was 25 kJ/mol, and there were no big difference in activation energies of the branched PPs compared to PP.

• Applied Chemistry for Engineering
• /
• v.22 no.6
• /
• pp.679-684
• /
• 2011

Branched polypropylenes (LCB-PP) with a long chain branch were prepared by the solid-state and molt-state reaction. Divinylbenzene (DVB), 1,4-benzenediol (RES), and furfuryl sulphide (FS) were used as branching agents of fabricate LCB-PP/silicate composites. Chemical structures, thermal properties, and rheological properties of the LCB-PP were determined by FT-IR, DSC, TGA, and dynamic rheometer (ARES). The chemical structure of the LCB-PP was confirmed by the existence of =C-H stretching peak of the branching agent at $3100cm^{-1}$. From DSC and TGA results, the melting reaction was more effective than the solid state reaction in the manufacture of LCB-PP, which was additionally certified by rheological properties. Based on rheological properties, FS was the best for branching efficiency of PP. Compared to PP, LCB-PPs indicated an increase of complex viscosity in the low frequency and shear thinning tendency, and G'-G" plot represented an increase in elasticity and the heterogeneousness in a melt state. Rheological properties of LCB-PP/silicate composites were observed with the silicate content. When 5 wt% silicate was added in LCB-PP, distinct changes in the shear thinning and the slope of G'-G" plots were observed.

• Journal of the Korean Chemical Society
• /
• v.55 no.4
• /
• pp.673-679
• /
• 2011

Bimodal high-density polyethylenes with different comonomer type and content were synthesized by polymerization of ethylene using Ziegler-Natta catalyst. Their structure and properties were studied using GPC, NMR, DSC and tensile test. It was found that ethylene/1-hexene copolymer exhibits higher tensile strength and elongation at break than that of ethylene/1-butylene copolymer with similar comonomer content. The molecular weight decreases as the comonomer content of the polymer increases. Short chain branching affects the crystallinity and thus the morphology and consequently the mechanical properties of the corresponding bimodal high-density polyethylenes. After SSA treated, the multiple endothermic peaks were observed. Multiple endothermic peaks are mainly attributed to the heterogeneity of ethylene sequence length and lamellar thickness. The difference of broadness index indicates that SCB distribution of polyethylene containing higher comonomer content has improved uniformity.

• Tuberculosis and Respiratory Diseases
• /
• v.48 no.5
• /
• pp.709-719
• /
• 2000

Background : The different features of high-resolution CT(HRCT) findings of active pulmonary tuberculosis(TB) were studied between acid fast bacilli(AFB) smear or culture positive and negative group. Methods : We prospectively evaluated 36 patients who had been confirmed for active pulmonary tuberculosis by the smear or culture of AFB in sputum(n=25), and changes on serial chest radiographs(n=11). The patients were divided into 3 groups by the results of sputum AFB stain and culture. Group 1(n= 11) is negative in both AFB stain and culture; group 2(n=13) is negative in AFB stain but positive in culture ; and group 3(n=12) is positive in both AFB stain and culture. We evaluated the findings of HRCT in each group randomly. Result : On the HRCT scans, acinar nodule(100%), macronodule(75%), and cavity(75%) in group 3 were more frequently found than group 1(63%. 18%, 9%) and group 2(46%, 15%, 23%)(p<0.05). The centrilobular nodule and branching structure were more frequently observed in group 3(92%) than in group 1(54%)(p<0.05), but were similarly observed in group 2(77%)(p>0.05). AFB positive group was statistically different than the negative group in the HRCT findings with to acinar nodule(100% vs 54%), macronodule(75% vs 17%), and cavity(75% vs 17%)(p<0.05). TB culture positive group was statistically different than the negative group in the HRCT findings with respect to acinar nodule(72% vs 45%) and cavity(48% vs 9%)(p<0.05). Conclusions : HRCT scans are helpful in determining disease acitivity in sputum AFB stain-negative pulmonary tuberculosis. When HRCT shows centrilobular nodule and branching structure, acinar nodule, macronodule, cavity, further studies as sputum induction and bronchoscopy can be performed to determine the presence of bacilli in patients of AFB stain-negative tuberculosis.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.3 no.5
• /
• pp.492-506
• /
• 2009

Index structures that are based on sequence matching for XPath processing such as ViST, PRIX and LCS-TRIM have recently been proposed to reduce the search time of XML documents. However, ViST can cause a lot of unnecessary computation and I/O when processing structural joint queries because its numbering scheme is not optimized. PRIX and LCS-TRIM require much processing time for matching XML data trees and queries. In this paper, we propose a novel index structure that solves the problems of ViST and improves the performance of PRIX and LCS-TRIM. Our index structure provides the minimum sequence matching scheme to efficiently process structural queries. Finally, to verify the superiority of the proposed index structure with the minimum sequence matching scheme, we compare our index structure with ViST, PRIX and LCS-TRIM in terms of query processing of a single path or of a branching path including wild-cards ('*' and '//' ).

• Journal of Species Research
• /
• v.6 no.2
• /
• pp.190-194
• /
• 2017

Two new species of the genus Luffariella (Dictyoceratida: Thorectidae), L. tubula n. sp. and L. koreana n. sp. were collected from Jeju-do, Korea. These species differ significantly from the previously reported five species in terms of shape and skeletal structure. L. tubula n. sp. has two categories in thickness of secondary fibres which were different from other species. L. koreana n. sp. is very similar to L. variabilis from Tahiti in skeletal structure, but differs in sponge shape with irregular branching and indistinct surface conules. Primary fibres of the two new species are separated from secondary and tertiary fibres.