• Korean Journal of Plant Resources
• /
• v.13 no.3
• /
• pp.213-218
• /
• 2000

Morphological characteristics of 16 collected safflower (Carthamus tinctorius L.)accessions were studied at Gyongbuk A.T.A. Uisong Medicinal Plant Experiment Station in 1998. As for plant height, 5 lines were tall(more than 131cm), which were mainly foreign safflower. Middle and small were 5 and 6 accessions, respectively. Number of branch per plant was 11∼13 in 2 accessions of domestic safflowers while foreign safflowers have more than 50 branches per plant. Leaf shapes were oblong(3 lines), lanceolate(10 lines) and broadly linear(3 lines). There were three types of leaf margin shape which were repand(7 lines), serrate(4 lines) and parted serrate(5 lines). Flower color was white(1 line), yellow(13 lines) and red orange(2 lines). As for flower head shape, 14 lines were conical and 2 lines were flattened. There were thorns on bract of flower head in 11 lines but in 5 lines there were not. Domestic safflower lines had seeds of conical shape. Contrastively, seed shapes of foreign saffower lines were oval.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.7
• /
• pp.3412-3432
• /
• 2019

Recent advances in radio frequency (RF) power transfer provide a promising technology to power sensor nodes. Adoption of mobile chargers to replenish the nodes' energy has recently attracted a lot of attention and the mobility assisted energy replenishment provides predictable and sustained power service. In this paper, we study the joint optimization of mobile charging and data gathering in sensor networks. A wireless multi-functional vehicle (WMV) is employed and periodically moves along specified trajectories, charge the sensors and gather the sensed data via one-hop communication. The objective of this paper is to maximize the uplink throughput by optimally allocating the time for the downlink wireless energy transfer by the WMV and the uplink transmissions of different sensors. We consider two scenarios where the WMV moves in a straight line and around a circle. By time discretization, the optimization problem is formulated as a 0-1 programming problem. We obtain the upper and lower bounds of the problem by converting the original 0-1 programming problem into a linear programming problem and then obtain the optimal solution by using branch and bound algorithm. We further prove that the network throughput is independent of the WMV's velocity under certain conditions. Performance of our proposed algorithm is evaluated through extensive simulations. The results validate the correctness of our proposed theorems and demonstrate that our algorithm outperforms two baseline algorithms in achieved throughput under different settings.

• Korean Chemical Engineering Research
• /
• v.57 no.2
• /
• pp.225-231
• /
• 2019

In Korea, the minimum separation distance between aboveground high-pressure natural gas pipeline and buildings is regulated by Korea gas safety (KGS) code. In this paper, The technical backgrounds for the revision of the KGS code related to the minimum separation distance was presented. A consequence-based approach was adopted to determine the minimum separation distance by a reasonable accident scenario, which was a jet fire caused by the rupture of one inch branch line attached the gas pipeline. Where, the higher thermal radiation flux threshold was selected for workers in industrial area than for people in non-industrial area, because the workers in industrial area were able to escape in a shorter time than the people in public. As result of consequence analysis for the accident scenario, we suggested the KGS code revision that the minimum separation distances between high-pressure natural gas pipeline installed above ground and buildings should be 30 meter in non-industrial area and 15 meter in industrial area. The revised code was accepted by the committee of the KGS code and now in effect.

• Advances in nano research
• /
• v.15 no.3
• /
• pp.263-275
• /
• 2023

The electron transport properties of Y-type zigzag branched carbon nanotubes (CNTs) are of great significance for micro and nano carbon-based electronic devices and their interconnection. Based on the semi-empirical method combining tight-binding density functional theory and non-equilibrium Green's function, the electron transport properties between the branches of Y-type zigzag branched CNT are studied. The results show that the drain-source current of semiconducting Y-type zigzag branched CNT (8, 0)-(4, 0)-(4, 0) is cut-off and not affected by the gate voltage in a bias voltage range [-0.5 V, 0.5 V]. The current presents a nonlinear change in a bias voltage range [-1.5 V, -0.5 V] and [0.5 V, 1.5 V]. The tangent slope of the current-voltage curve can be changed by the gate voltage to realize the regulation of the current. The regulation effect under negative bias voltage is more significant. For the larger diameter semiconducting Y-type zigzag branched CNT (10, 0)-(5, 0)-(5, 0), only the value of drain-source current increases due to the larger diameter. For metallic Y-type zigzag branched CNT (12, 0)-(6, 0)-(6, 0), the drain-source current presents a linear change in a bias voltage range [-1.5 V, 1.5 V] and is symmetrical about (0, 0). The slope of current-voltage line can be changed by the gate voltage to realize the regulation of the current. For three kinds of Y-type zigzag branched CNT with different diameters and different conductivity, the current-voltage curve trend changes from decline to rise when the branch of drain-source is exchanged. The current regulation effect of semiconducting Y-type zigzag branched CNT under negative bias voltage is also more significant.

• Anatomy and Cell Biology
• /
• v.56 no.4
• /
• pp.508-517
• /
• 2023

In cancer patients, chemo/radio therapy may cause infertility by damaging the spermatogenesis affecting the self-renewal and differentiation of spermatogonial stem cells (SSCs). In vitro differentiation of stem cells especially mesenchymal stem cells (MSCs) into germ cells has recently been proposed as a new strategy for infertility treatment. The aim of this study was to evaluate the proliferation and differentiation of SSCs using their co-culture with Sertoli cells and conditioned medium (CM) from adipose tissue-derived MSCs (AD-MSCs). Testicular tissues were separated from 2-7 days old neonate Wistar Rats and after mechanical and enzymatic digestion, the SSCs and Sertoli cells were isolated and cultured in Dulbecco's modified eagle medium with 10% fetal bovine serum, 1X antibiotic, basic fibroblast growth factor, and glial cell line-derived neurotrophic factor. The cells were treated with the CM from AD-MSCs for 12 days and then the expression level of differentiation-related genes were measured. Also, the expression level of two major spermatogenic markers of DAZL and DDX4 was calculated. Scp3, Dazl, and Prm1 were significantly increased after treatment compared to the control group, whereas no significant difference was observed in Stra8 expression. The immunocytochemistry images showed that DAZL and DDX4 were positive in experimental group comparing with control. Also, western blotting revealed that both DAZL and DDX4 had higher expression in the treated group than the control group, however, no significant difference was observed. In this study, we concluded that the CM obtained from AD-MSCs can be considered as a suitable biological material to induce the differentiation in SSCs.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.5
• /
• pp.794-803
• /
• 1997

Long line suspended culture of oysters has been started commercially in Hansan-Koje Bay since 1969. However, its Annual production has been decreased and culturing periods extended in recent years. So, we investigated environmental parameters and food organisms to identity the causes of poor fatness of oysters in Hansan-Koje Bay from February to November, 1994. As the result, the Water quality of Hansan-Koje Bay was found to be good for culture. For example, the mean concentration of COD was $1.35mg/\ell$, phosphate phosphorus was $0.30{\mu}g-at/\ell$ and dissolved inorganic nitrogen was $4.68{\mu}g-at/\ell$. However, the Hwado island and the inner part of the Hansan-Koje Bay were found to be eutrophicated due to various contaminants transported by land-based activities. But in the central pan of the Hansan-Koje Bay where the oyster farms Have been developed densely, the level of nutrient concentration was very low. During the study period, the dominant species of phytoplankton was Chaetoceros spp. with the percentage of $72.6\%\~87.8\%$ and the mean values of Chlorophyll-a concentration and phytoplankton standing crops were $2.05mg/m^3\;and\;188ind./m\ell$, respectively. The distribution of these parameters also showed similar trends those of nutrients. Especially, chlorophyll-a contents was very low with the concentration of below $0.5mg/m^3$ at central part of the Bay, Juklimpo. The fatness of oysters and the eutrophic index in this area were $18.1\%$ and 0.54, respectively. These values were lower than those of other culturing farms in the southern coastal areas in Korea. Therefore, we estimated that the insufficient food supply due to the low level of nutritional status was the major factors affecting the poor fatness of the Pacific oysters in Hansan-Koje Bay.

• Journal of Life Science
• /
• v.31 no.2
• /
• pp.229-236
• /
• 2021

This study was carried out to evaluate the antioxidant properties of the dried leaves and branches of Stewartia koreana Nakai. The dried leaf and branch of S. koreana were extracted with 70% ethanol at 80℃. The antioxidant activities of ethanol extracts of S. koreana leaf (EESL) and S. koreana branch (EESB) were analyzed. The total polyphenol contents in EESL and EESB were 162.57±0.9 mg of GAEs/extract g and 59.1±0.9 mg of GAEs/extract g, respectively. The flavonoid contents in EESL and EESB were 59.1±0.9 mg of QEs/extract g and 4.7±0.1 mg of QEs/extract g, respectively. EESL showed a better scavenging ability with DPPH and ABTS than EESB, at 0.4 mg/ml. Moreover, EESL were more effective according to ORAC values than EESL. The toxicity of EESL was investigated using a WST-1 assay on the human skin fibroblast cell line CCD-986sk. Therefore, EESL can be used as a potential source of functional, naturally-sourced material in cosmetics as well as food.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.6
• /
• pp.989-999
• /
• 2017

In this study, hydraulic experimental studies were conducted to estimate the empirical formulas of loss coefficient, which is necessary to calculate the energy loss occurred in the dividing channel junction of sewer system. The experimental apparatus was consisted of two outflow conduit with a $90^{\circ}$ angle to the inlet conduit, and the pressure and velocity heads are measured to analyze the energy losses in the branch. The measurements of the hydraulic grade line show that the hydraulic grade line was steeply descended at the dividing point due to the head loss, and the decreasing amount of velocity head increased with the increase of flowrate ratio. The head loss exponentially increased in the outlet with larger runoff as the increase of flowrate ratio and Froude number, and the head loss coefficient also increased. On the other hands, the head loss coefficients decreased in the outlet with smaller runoff as the increase of the flowrate ratio and Froude number. Using the experimental results, the empirical formulas of loss coefficient was suggested for each outlet, and the error of empirical formula was 3.91 and 5.19%, respectively. Furthermore, the total head loss coefficient calculated by the two empirical formulas was compared with the experimental results, and the error was 3.62%.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.3
• /
• pp.243-250
• /
• 2004

Two cultivars which are glutinous (Hawcheongchalbyeo) and non-glutinous (Hawcheongbyeo) near isogenic line of rice, were used for this study. The objective of this experiment was to gain the basic information for increasing grain yield of waxy rice by means of source and sink size control. In both Hwacheongbyeo and Hawcheongchalbyeo, the trend of decrease in total and average spikelet weight was ranked as follows; removal of penultimate leaf＜ removal of flag leaf＜ removal of flag leaf and 3ya leaf from the top ＜ removal of flag leaf and penultimate leaf ＜ removal of flag leaf, penultimate leaf, and 3rd leaf from the top. The reduction yale of total and average spikelet weight per panicle of Hwacheongbyeo was higher than those of Hwacheongchalbyeo according to the removal of flag leaf, penultimate leaf, and 3rd leaf from the top. In both cultivars, high-density grain ratio and grain filling ratio of the primary branches were higher Hun those of the secondary branches by leaf clipping treatment. The spikelet number and total spikelet weight per pinicle in both Hwacheongbyeo and Hwacheongchalbyeo were decreased by removal of spikelets on branches compared with control, whereas average spikelet weight and grain filling ratio were increased. The increase rate of average spikelet weight of Hwacheongchalbyeo was much higher than that of Hwacheongbyeo by sink size control. High-density grain ratio by removal of spikelets on branches was higher in Hwacheongchalbyeo, but filled grain ratio was higher in Hwacheongbyeo.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.5
• /
• pp.1154-1163
• /
• 2008

DAS and SCADA system are main systems, which operate and manage the power system by using computer and communication technology. But DAS and SCADA have been operated independently in Korea, so there was some time delay in the fault handling and live-line work. To improve that problems, studies on the interface between DAS and SCADA have been needed. From November 2005 to December 2007, the pilot project has been performed in KEPCO's branch offices, as a result, direct method will be applied widely all over the country until 2010 because the operation information of substation users want can be transmitted fast and it is possible to control 43RC directly although the expense for direct method is about 1.3 times larger than that for web method. To improve problems revealed during the pilot project, substation object to object communication method is proposed and interface database automatic generation and interface system diagnosis and logging functions are developed. Interface data point and communication data type are defined, substation single line diagram automatic generation or manual editing function, SCADA monitoring and controlling function, log data managing function are developed in SCADA HMI program. It is expecting to reduce the average time for each outage about 33% and to improve the reliability, efficiency of operation, execution of DAS from automatic load transfer under a fault, and to contribute to export project.