• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.10
• /
• pp.823-829
• /
• 2005

We have newly constructed an in silico model of fermentative metabolism for Lactococcus lactis in order to analyze the characteristics of metabolite flux for dynamic network. A rigorous mathematical model for metabolic flux has been developed and simulation researches have been performed by using GEPASI program. In this simulation task, we were able to predict the whole flux distribution trend for lactate metabolism and analyze the flux ratio on the pyruvate branch point by using metabolic flux analysis(MFA). And we have studied flux control coefficients of key reaction steps in the model by using metabolic control analysis(MCA). The role of pyruvate branch seems to be essential for the secretion of lactate and other organic byproducts. Then we have made an effort to elucidate its metabolic regulation characteristics and key reaction steps, and find an optimal condition for the production of lactate.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.33 no.1
• /
• pp.9-16
• /
• 1984

This paper describes the minimum cost expansion planning which is based on the economical aspect under the various conditions on the power system expansion planning. It presents not only linear cost characteristics analysis but also stepwise cost characteristics analysis which satisfies practical condition in the power system. The latter analysis must be handled by integer programming (IP), because the relation between the cost and the capacity has stepwise characteristics. In order to proceed the latter analysis, the solving procedure is illustrated in detais by using branch and bound method which includes the network flow theory and maximum flow-minimum cut theorem.

• Smart Structures and Systems
• /
• v.22 no.6
• /
• pp.743-751
• /
• 2018

In this project, buckling response of polymeric plates reinforced with carbon nanotubes (CNTs) and coated by magnetostrictive layer was studied. The equivalent nanocomposite properties are determined using Mori-Tanak model considering agglomeration effects. The structure is simulated with first order shear deformation theory (FSDT). Employing strains-displacements, stress-strain, the energy equations of the structure are obtained. Using Hamilton's principal, the governing equations are derived considering the coupling of mechanical displacements and magnetic field. Using Navier method, the buckling load of the sandwich structure is obtained. The influences of volume percent and agglomeration of CNTs, geometrical parameters and magnetic field on the buckling load are investigated. Results show that with increasing volume percent of CNTs, the buckling load increases. In addition, applying magnetic field, increases the frequency of the sandwich structure.

• Journal of Drive and Control
• /
• v.20 no.2
• /
• pp.1-6
• /
• 2023

This study aims to develop a Korean dental chair hydraulic circuit by improving the existing equipment in order to localize foreign leading companies' products. The suggested Hydraulic circuit can be applicable to varied sectors where height and backrest angle control of chair-type equipment are required. The study followed the steps below. First, three kinds of foreign hydraulic circuits were analyzed and three kinds of Korean dental chair hydraulic circuits were suggested. Second, it was determined whether the three kinds of Korean hydraulic circuits operate normally through SimulationX, a software specialized in multi domain analysis, and the effectiveness of each circuit was examined.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.6
• /
• pp.345-351
• /
• 2019

Recently, ink-jet printing technology has been applied for various industries such as semiconductor, display, ceramic tile decoration. Ink-jet printing has advantages of high resolution patterning, fast printing speed, high ink efficiency and many attempts have been made to apply functional materials with excellent physical and chemical properties for the ink-jet printing process. Due to these advantages, research scope of ink-jet printing is expanding from conventional two-dimensional printing to three-dimensional printing. In order to expand the application of ink-jet printing, it is necessary to optimize the rheological properties of the ink and the interaction with the substrate. In this study, photo curable ceramic complex ink containing nano silica particles were synthesized and its printability was characterized. Contact angle of the photo curable silica ink were modified by control of the ink composition and the surface property of the substrate. Effects of contact angle on printing resolution and three-dimensional printability were investigated in detail.

• Korean Journal of Medicinal Crop Science
• /
• v.13 no.6
• /
• pp.268-272
• /
• 2005

This study was carried out to investigate the labor saving cultivation of C. auriculatum, which has much bigger root than local variety C. wilfordii, and tested three nonsupporting methods, i.e., untreated control, top pinching, and cutting of branch-top compared with I type stake. Top growth was more vigorous in staking cultivation than in nonsupporting cultivations. Among nonsupporting methods, main vine length and total length of main vines per plant were increased in order of untreated control > top pinching > cutting of branch-top, while the opposite is true to diameter of main vein. Number of leaves per plant was lower, but leaf length and leaf width were higher in cutting of branch-top than in other nonsupporting methods. Number of branched root and diameter of main root were bigger in cutting of branch-top and in staking cultivation, while length of main root and diameter of branched root were greater in staking cultivation and in top pinching than in other treatments. Although yield of marketable root per 10a was $17.9{\sim}22.6%$ lower, income was $8%{\sim}17%$ higher in nonsupporting methods than in staking cultivation by cost saving to staking installation. Among nonsupporting methods, yield of marketable root and income were 6% and 8% higher in cutting of branch-top than in untreated control, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6221-6226
• /
• 2015

In this paper, waveguide analysis was interpreted as an optical waveguide using the feedback perturbation method simple and easy to apply compared to the analysis method, while the other almost identical to the numerical calculation method. In addition, efficient coupling with an optical transmission line of optical fiber and the waveguide form the thin film of different functional elements is required in order to achieve the full optical communication system. However, problems arise, such as the light field (field) and the decrease of the access efficiency due to inconsistency in the distribution characteristics of the connection surface by the difference in size of the cross section thereof when connecting the optical fiber and the waveguide directly to the combination of a thin film. Therefore propose a new type of connector structure to increase the efficiency of the connection when connecting the optical fiber waveguide and the thin film was analyzed by applying a coupled mode theory, the binding efficiency of the modified contactor. And by diffusing Ti on the $LiNbO_3$ substrate and a wide range of applications in the manufacture of integrated optical material made of a current low-loss Ti: $LiNbO_3$ optical waveguide and making the Y-branch waveguide, and the properties were confirmed.

• Journal of Preventive Medicine and Public Health
• /
• v.33 no.1
• /
• pp.36-44
• /
• 2000

Objective : The heart diseases are known as a major cause of sudden death, as well as a cause of poor life-quality of school-age children. But there have been few mass screening of heart diseases in these children in Korea. This study was done to estimate the prevalence of heart diseases of these population. Methods : We screened all elementary students(grade 1) in 12 cities and 16 counties(Gun) in Kyonggi province from 1992 to 1955. The first screening was done by auscultation of doctors and simultaneously by checking using 'auto-interpreter of EKG-cardiac sound' (Fukuda Densi ECP 50A). We conducted luther examinations to whom classified as being abnormal condition in first screening, by using EKG, chest x-ray, doppler echocardiograpy(if needed). Results : The total number of examined students was 161,308(92% of the population), the male were 83,238 and female were 78,070. The congenital heart diseases(CHD) patients were 290(18 per 10,000) - male 155(18.6 per 10,000) and female 135(17.3 per 10,000). The most frequent disease was ventricula septal defect(VSD, 45.5%), Atrial septal defect(ASD, 14.8%), Tetralogy of Follot(TOF, 11.7%), and Patent Dutus Arteriosis(PDA, 7.6%) in order. In female, the order was VSD(48.1%), ASD(13.3%), TOF(11.1%), and PDA(10.4%). The total number of EKG abnormality were 433(62.7 per 10,000) among 69,056 screened children in 1995. The complete right bundle branch block(CRBBB) and paroxymal ventricular contraction(PVC) were frequent(26.6%, 26.3% in each), and incomplete right bunddle branch block(IRBBB, 14.6%), paroxymal atrial contraction(PAC, 6.7%), abnormal Q(5.8%), Wolf-Pakinson-White syndrom (5.5%) in order. In female, the most frequent abnormality was PVC(29.8%), and CRBBB(19.9%) in order. Conclusion : We could present the stable prevalence of the rare heart disease. The prevalence of congenital heart diseases was 18.0 per 10,000 and of EKG abnormality was 62.7 per 10,000 among school children.

• International Journal of Control, Automation, and Systems
• /
• v.3 no.1
• /
• pp.56-69
• /
• 2005

In this paper, it is clearly shown that the two well-known necessary and sufficient conditions mp n as generic static output feedback pole-assignment and mp + d(m+p) n+d as generic minimum d-th order dynamic output feedback pole-assignment on complex field, unbelievably, do not match up each other in strictly proper linear systems. For the analysis, a diagram analysis is newly created (which is defined by the analysis of 'convoluted rectangular/dot diagrams' constructed via node-branch conversion of the signal flow graphs of output feedback gain loops). Under this diagram analysis, it is proved that the minimum d-th order dynamic output feedback compensator for pole-assignment in m-input, p-output, n-th order systems is quantitatively decomposed into static output feedback compensator and its associated d number of arbitrary 1st order dynamic elements in augmented (m+d)-input, (p+d)-output, (n+d)-th order systems. Total configuration of the mismatched data is presented in a Table.

• Journal of the Korean Regional Science Association
• /
• v.6 no.2
• /
• pp.123-147
• /
• 1990

This paper examines the changing geography of producer service industries in the 1980s. The foci of this study are to analyze the regional distribution of each producer services, and to reveal the spatial linkage of producer services. Further this paper asserts the potential role of producer services for reducing the potential endogenous development in the periphery. During the 1981-86 period, producer service industries grew more rapidly than other service sectors and manufacturing sector. The main reason of the raid growth of producer services is attributable to an increase in demand for intermediate services from manufacturing firms. In order to compete an increasingly complex business environment, firms have expanded the amount of effort devoted to activities such as planning, coordination and control, and consequently have increased their use of producer services. The most distinctive feature of the location of producer services is spatial concentration into Seoul and surrounding region. Especially the degree of the concentration o business services into the Capital Region has been accelerating during the 1990s. The pattern of employment growth and regional distribution of producer services show a clear core / periphery disparity. Much of the regional inequality in producer services is largely due to variation in demand associated with the pattern of corporation headquarters with the pattern of corporation headquarters and branch plants location with large manufacturing firms. The analysis of spatial division of labor reflects that producer services are related to the location of headquarters in manufacturing industry. Headquarters in manufacturing firms and business service firms tend to cluster each other. Most of the headquarters spatially separated from branch offices are clustered heavily in Seoul. Especially headquarters of business services and insurance services are overwhelmingly concentrated into Seoul. The firms whose headquarters are located in Seoul have a linkage pattern on a nationwide scale. It is viewed have little potential for generating local multiplier effects and regional development. In the light of the result of this study, producer services are not likely to disperse soon to peripheral regions. Consequently the absence of policies directed at enhancing producer sevice in the periphery, concentration tendency would continue to reinforce the core's dominance at the expense of peripheral regions. From a regional perspective, the quality of a region's producer service sector is a key determinant of economic growth, since manu industrial location decisions are influenced by the differential availability of producer services among regions. Poor performance of producer services in peripheral regions seemed to be linked to the region's manufacturing base. Low-wage, standardized branch plants are not likely to induce the growth in knowledge intensive services associated with high-technology corporate headquarters. Producer services may help to create and attract new business including manufacturing firms, and also to enhance the productivity and competitiveness of local firms. Therefore the provision of service producing activities would be lead not only to generate and retain endogenous development but also to attract external firms, especially small and medium sized firms which have a lower propensity of internalized services. Hence, it may be more efficient to create and expanse new locally owned producer services rather than to attract branch plants of mult-locational firms in order to make indigenous economic development.