DOI QR코드

DOI QR Code

Case of Improving Design by Using Analysis Model of Hydraulic System for Dental Chair

치과용 유니트체어 유압구동 시스템 해석모델을 활용한 개선설계 사례

  • Dae Kyung Noh (Daegu, Gyeongbuk Branch, Korea Institute of Science and Technology Information) ;
  • Dong Won Lee (Daegu, Gyeongbuk Branch, Korea Institute of Science and Technology Information) ;
  • Taek June Kim (R&D center, CYSKO) ;
  • Joo Sup Jang (Department of Mechanical Engineering, Gachon University)
  • Received : 2023.02.02
  • Accepted : 2023.03.10
  • Published : 2023.06.01

Abstract

This study aims to develop a Korean dental chair hydraulic circuit by improving the existing equipment in order to localize foreign leading companies' products. The suggested Hydraulic circuit can be applicable to varied sectors where height and backrest angle control of chair-type equipment are required. The study followed the steps below. First, three kinds of foreign hydraulic circuits were analyzed and three kinds of Korean dental chair hydraulic circuits were suggested. Second, it was determined whether the three kinds of Korean hydraulic circuits operate normally through SimulationX, a software specialized in multi domain analysis, and the effectiveness of each circuit was examined.

Keywords

Acknowledgement

본 연구는 한국과학기술정보연구원 「수요대응형 지역혁신 생태계 활성화 및 AI 솔루션 실용화 지원체제 구축」 사업의 지원을 받아 진행되었습니다.

References

  1. FINESINTER CO., LTD(2020). JAPAN Patent No. 2021-134898A, 愛知県春日井市明知町西之洞1189 番地11:株式会社ファインシンター.
  2. GC Corporation(2009). JAPAN Patent No. 2010-233604A, 東京都板橋区蓮沼町76番1号:株式会社ジーシー.
  3. OSADA ELECTRIC CO LTD(2014). JAPAN Patent No. 2016-073343A, 東京都品川区西五反田5丁目17番5号:長田電機工業株式会社.
  4. Y. H. Yoon and J. S. Jang, "SimulationX, Multi-domain Simulation and Modeling tool for the Design, Analysis, and Optimization of Complex systems", J. of Drive and Control, Vol.9, No.1, pp.56-69, 2012. https://doi.org/10.7839/ksfc.2012.9.1.056
  5. D. K. Noh, Y. K. Kang, J. D. Ji, J. S. Park and J. S. Jang, "Case of Developing Analysis Model for Recoil System for Automatic Gun", Journal of Korea Society for Simulation, Vol.24, No.4, pp.35-41, 2015. https://doi.org/10.9709/JKSS.2015.24.4.035
  6. D. K. Noh, S. C. Kim, Y. J. Kim, and J. S. Jang, "Lubricant flow analysis for effective lubrication of tractor forward/reverse clutch", Heliyon, Vol.3, No.4, e00295, 2017.
  7. D. K. Noh, D. H. Lee, J. S. Yun, and D. W. Lee, "Development of Analysis Model and Sensitivity Analysis for High-Power Hydraulic Drifter Design", J. of the Korea Society for Simulation, Vol.27, No.2, pp.11-24, 2018.
  8. D. K. Noh, D. W. Lee, J. S. Lee, and J. S. Jang, "Analysis of Surplus Flow in a Hydraulic System Applied to a Self-propelled Spinach Harvester," J. of Drive and Control, Vol. 19, No. 1, pp.26-33, 2022.
  9. D. K. Noh, D. W. Lee, J. S. Lee, and J. S. Jang, "Improving Hydraulic System Design by Analysis Model of a Self-propelled Spinach Harvester," J. of Drive and Control, Vol. 19, No. 1, pp.69-75, 2022.
  10. D. K. Noh, D. W. Lee, T. J. Kim, and J. S. Jang, "Developing Analysis Model of Hydraulic System for Dental Chair," J. of Drive and Control, Vol. 20, No. 1, pp.27-33, 2023.
  11. G. H. Jung, "Design of a Height Adjustable Bunker Bed Using a Gas Spring", J. of Drive and Control, Vol. 18, No. 4, pp.19-27, 2021.
  12. FINE SINTER CATALOG & Technical Data.