• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.941-947
• /
• 2008

철도차량의 제동에는 전기의 회생, 발전을 이용하는 전기적 제동장치와 함께 차륜 답면 및 디스크를 사용하는 기계식 제동장치가 적용된다. 특히 브레이크 디스크의 제동작용에 있어서, 디스크와 마찰패드와의 마찰을 통해 차량의 운동에너지가 열에너지로 변환되며 이때 디스크 표면에는 매우 높은 온도가 집중하게 된다. 이러한 고온 집중의 반복에 의해 디스크 표면에는 열피로에 기인한 열균열이 발생하게 된다. 발생된 열균열은 차량 유지보수성능을 저하시키고 최악의 경우 대규모의 사고를 유발할 수도 있다. 본 연구에서는 보다 높은 내열성을 갖는 브레이크 디스크 소재를 개발하기 위한 과정의 일환으로 재료의 내열성 비교시험절차를 구축하였다. 또한 현재 새마을호 및 무궁화호 열차에서 사용되는 브레이크 디스크 재질을 이용한 시험을 통해 시험 절차의 효용성을 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.842-846
• /
• 2005

A brake disk and a pad are important parts that affect the braking stability of a railway vehicle. Especially, because a brake disk stops the vehicle using conversion of the kinetic energy to frictional energy, thermal fatigue cracks are generated by the cyclic thermal load, as frictional heat, on a frictional surface and these cracks cause the fracture of a brake disk. Therefore, many researches for the thermal stress must be performed to improve the efficiency of brake disk and ensure the braking stability. In this study, we performed the thermal stress analysis for a ventilated brake disk with 3-D analysis model. For that, we simplified the shape of a ventilated hole to minimize problems that could be occurred in analysis process. Thermal stress analysis was performed in case that pressure distributions on a frictional surface is constant and is not. To determine pressure distributions of irregular case, pressure distribution analysis for a frictional surface was carried out. Finally using the results that were obtained through pressure distribution analysis, we carried out thermal stress analysis of each case and investigated the results of thermal stress analysis.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.204-212
• /
• 2010

전동차가 주행중에 브레이크 페달의 작동으로 주행모터의 양단에 발전된 전류는 전기에너지 특성상 바로 소비되지 않으면 제동력이 발생하지 않는 현상(회생 실효)가 발생하기 때문에 주변에 역행차량이 없거나 가선 전압이 안정되지 않는 경우 안정된 제동성능을 확보할 목적으로 발전제동을 병설한 차량이 존재하고 있다. 그래서 입력된 에너지의 55%를 전동차에서 소비하고 하구배 구간이나 회생 제동시 45%의 입력에너지 사용되며 그중25%는 가선을 통해 다른차 의 역행을 사용되므로 기존의 시스템을 크게 벗어나지 않고 회생 수단,회생 실효를 줄이기 위해서는 변전소의 배출전압저하(5%)정도 하여 회생시 지나친 가선 전압 상승를 완화 시킬 수 있다. 실제로 1호선 직류구간에 혼잡시간때 한구간에 상선기준으로 3대의 전동차가 운행되어 1500V의 전압측정과 비혼잡시간에는 1대~2대의 전동차정도 운행으로 1700~1800V 측정되므로 5%정도 조정은 운행에 지장을 초래하지 않을것으로 사료된다. 적정전압 측정 데이터을 통한 탄력적인 배출전압 조정을 통해 지하철 또한 에너지 소비효율을 위한 연구가 필요하다고 본다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.193-196
• /
• 2014

Experimantal evaluation of an energy storage device with high rotational speed to store regenerative energy which might be generated during the braking period of the trains is presented. The proposed ESS is small scale model and has 5kW output power, high rotational speed. In general railway trains generate regenerative energy for 10-20 sec when the train brakes and also high traction energy is needed for very short moment (10 sec) when the train increases the traction force. Considering such characteristics of the railway system energy storage device for the railway should have very fast response property. Among the various energy storage devices flywheel energy storage system has the fastest response property, which means that flywheel ESS is the most suitable for the railway system.

• International Journal of Automotive Technology
• /
• 제5권4호
• /
• pp.287-295
• /
• 2004

A performance simulator for the fuel cell hybrid electric vehicle (FCHEV) is developed to evaluate the potentials of hybridization for fuel cell electric vehicle. Dynamic models of FCHEV's electric powertrain components such as fuel cell stack, battery, traction motor, DC/DC converter, etc. are obtained by modular approach using MATLAB SIMULINK. In addition, a thermodynamic model of the fuel cell is introduced using bondgraph to investigate the temperature effect on the vehicle performance. It is found from the simulation results that the hybridization of fuel cell electric vehicle (FCEV) provides better hydrogen fuel economy especially in the city driving owing to the braking energy recuperation and relatively high efficiency operation of the fuel cell. It is also found from the thermodynamic simulation of the FCEV that the fuel economy and acceleration performance are affected by the temperature due to the relatively low efficiency and reduced output power of the fuel cell stack at low temperature.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 추계학술대회 논문집
• /
• pp.161-168
• /
• 1998

This paper presents an simulation methdology for determining an economical running pattern for a high speed train which minimizes energy consumption under an given trip time margin. The economical running pattern is defined with an economical maximum speed in traction phase, a speed at the end of coasting and a speed at the end of regenerative braking alone in braking phase. An economical run for subways is also described. As a case study, the simulation is carried out fer an economical run of high speed NamSeoul-Pusan line, and the results described. To do this, train performance simulation program is built and extended to be able to find an economical running pattern and then to simulate the defined economical run.

• 한국철도학회논문집
• /
• 제6권2호
• /
• pp.100-107
• /
• 2003

This paper presents development of train performance simulation(TPS) program to analyze traction performance, braking performance and energy consumption for Korea high speed railway system. The conventional TPS program have some inconveniences such as DOS-based platform, user interface and limited function. The simulation technique model using scenario menu, various analysis function and object-oriented design/programming is presented. This simulation result have been compared with Alstom's for the Seoul-Pusan High Speed Rail Project.

• International Journal of Computer Science & Network Security
• /
• 제22권4호
• /
• pp.237-244
• /
• 2022

Eco-driving of vehicles today presents an advantage that aims to reduce energy consumption and limit CO2 emissions. The application for this option is possible to older vehicles. In this paper, we propose an efficient implementation for IoT (Internet of Things) system for controlling vehicle components that affect the quality of driving (acceleration, braking, clutch, gear change) via Smartphone using Wi-Fi and BLE as communication protocol. The user can see in real-time data from sensors that control driver action on vehicle driving systems such as acceleration, braking, and vehicle shifting through a web interface. Thanks to this communication, the user can control his driving quality and, hence, eco-driving can be achieved

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.290-295
• /
• 2004

Electrification of existing railroad as well as extension of double track, need a large amount of electric energy. Especially, increase in energy consumption of high cost causes much problems in domestic economy. It is neccessary to save energy for the crisis of exhaust of fossil energy. About $20{\~}25\%$ of regenerated energy of an electric railcar is lost on down slope run or on braking. In order to save energy in electric railway system, Therefor, application of energy regeneration system is proposed and introduced in the present paper.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1165_1166
• /
• 2009

In recent years, energy prices have soared, which of course have increased costs for railway operators. Simultaneously, the energy market has considerably changed that in most developed countries, it is deregulated, giving railway operators an opportunity to define new ways of using energy. Efficient operation of the railway system is considered as an essential way to energy saving while an efficient management of power level helps to lower the reference subscribed power, giving access to better energy rates. It is studied on the relation between time and force for the energy efficient driving of train in railway when the train is braking according to several slips.