• 한국임상수의학회지
• /
• 제28권3호
• /
• pp.328-331
• /
• 2011

간헐적 전지 파행을 보이는 두 마리 개가 내원하였다. 신체 검사에서 약 $90^{\circ}$ 외측 회전을 동반한 전완 기형을 두 마리 모두에서 확인 하였다. 일반 방사선 사진에서 척골 원위부 아탈구, 요골 앞쪽 휨 현상, 짧아진 요골 척골, 및 앞발의 외측 회전을 확인하였다. 외측 회전을 동반한 전완 기형의 교정을 위해 척골 원위부 골절제와 요골 원위부 쐐기형 절골술 및 요골 원위부 내측 회전을 실시 하였다. 관절 부조화를 예방하기 위해 척골 근위부 절골술을 첫 번째 개에서 실시 하였다. 수술 후 정기 검진은 수의사의 신체 검사를 통해 실시 되었으며 두 마리 모두에서 수술과 관련한 합병 증상 및 파행이 없음을 확인하였다.

• 한국통신학회논문지
• /
• 제30권4A호
• /
• pp.250-258
• /
• 2005

본 논문에서는 다중사용자 주파수 도약 OFDMA(frequency hopping orthogonal frequency division modulation-requency division multiple access, FH-OFDMA) 시스템에서 단일 프리엠블 심볼을 이용하여 정확하고 신속한 주파수 동기를 획득할 수 있는 프리엠블 구조와 동기 알고리듬을 제안한다. 서로 다른 주파수 옵셋을 갖는 다중 사용자 신호가 수신되면, 부반송파간 직교성이 훼손되어 간섭이 발생한다. 제안한 알고리듬은 각 사용자에게 할당되는 부채널을 대략적 주파수 옵셋 추정 영역과 미세 주파수 옵셋 추정 채널 영역으로 분할하여 프리엠블을 생성한다. 미세 주파수 옵셋은 전력밀도 함수를 이용한 NAH (non-data aided)방식을 이용하여 추정하곡 짧은 심볼을 얻은 후 심볼간의 상관을 이용하여 추정한다. 두 추정치를 조합하면 한 개의 프리엠블 신호로 정확한 주파수 옵셋을 측정할 수 있다. 모의 실험에서는 일반적인 상관을 이용한 방식과 본 알고리듬의 주파수 옵셋 추정 성능을 상향 FH-OFDMA 시스템을 구성하여 비교 평가한다.

• 한국정보통신학회논문지
• /
• 제7권8호
• /
• pp.1629-1637
• /
• 2003

본 논문에서는 다중톤 재밍이 존재하는 나카가미­m 페이딩 환경하에서 BFSK 변조방식을 사용한 Hybrid DS/FH 확산대역 시스템의 성능을 분석하였다. 분석 결과 주파수 도약율이 증가할수록 시스템의 성능이 향상되었으며, 확산대역 시스템의 복합비를 고정하였을 경우 DS확산대역 방식의 시스템보다 더 낮은 비트 에러 확률을 가짐을 증명하였다. 또한 m값이 증가함에 따라 페이딩의 영향이 감소함을 알 수 있었으며, 신호대 방해신호의 전력비(SJR)가 증가할수록 DS 확산대역 시스템보다 성능이 향상됨을 알 수 있었다. 결과적으로 재밍이 존재하는 나카가미­m 페이딩 환경 하에서 Hybrid DS/SFH 확산대역 시스템의 성능이 DS 확산대역 시스템의 성능보다 우수함을 입증하였다.

• Smart Structures and Systems
• /
• 제18권3호
• /
• pp.601-623
• /
• 2016

Precast concrete elements are widely used in the construction of buildings and civil infrastructures as they provide higher construction quality and requires less construction time. However, any abnormalities in precast concrete surfaces such as non-flatness or distortion, can influence the erection of the elements as well as the functional performance of the connections between elements. Thus, it is important to undertake surface flatness and distortion inspection (SFDI) on precast concrete elements before their delivery to the construction sites. The traditional methods of SFDI which are conducted manually or by contact-type devices are, however, time-consuming, labor-intensive and error-prone. To tackle these problems, this study proposes techniques for SFDI of precast concrete elements using laser scanning technology. The proposed techniques estimate the $F_F$ number to evaluate the surface flatness, and estimate three different measurements, warping, bowing, and differential elevation between adjacent elements, to evaluate the surface distortion. The proposed techniques were validated by experiments on four small scale test specimens manufactured by a 3D printer. The measured surface flatness and distortion from the laser scanned data were compared to the actual ones, which were obtained from the designed surface geometries of the specimens. The validation experiments show that the proposed techniques can evaluate the surface flatness and distortion effectively and accurately. Furthermore, scanning experiments on two actual precast concrete bridge deck panels were conducted and the proposed techniques were successfully applied to the scanned data of the panels.

• 대한치과교정학회지
• /
• 제51권1호
• /
• pp.32-42
• /
• 2021

Objective: To investigate the three-dimensional forces created by clear aligners on mandibular teeth during differential activation with en-masse retraction and/or intrusion in vitro. Methods: Six sets of clear aligners were designed for differential en-masse retraction and/or intrusion procedures in a first premolar extraction model. Group A0 was a control group with no activation. Groups A1-5 underwent different degrees of retractions and/or intrusions. Each group consisted of 10 aligners. Aligner forces were measured on a multi-axis force/torque transducer measurement system in real-time. Results: In the en-masse retraction groups (A1 and A2), lingual and extrusive forces were observed on the incisors; the canines mainly received distal forces; intrusive forces were seen on the second premolars; and the molars received mesial forces. In the en-masse retraction and intrusion groups (A3, A4, and A5), incisors also received lingual and extrusive forces; canines received distal and intrusive forces; mesial and extrusive forces were seen on the second premolars; and the second molars received distal and intrusive forces. The vertical forces on the incisors did not differ significantly among groups A1, A3, and A5. However, the vertical forces on the second premolars reversed from intrusion in group A1 to extrusion in groups A3 and A5. Conclusions: With clear aligners, the "bowing effect" is seen during en-masse anterior teeth retraction and can be partially relieved by performing en-masse retraction accompanied by anterior teeth intrusion. Vertical control of incisors remained unsolved during en-masse retraction, even when intrusive activation was added to the anterior teeth.

• 대한금속재료학회지
• /
• 제47권8호
• /
• pp.494-499
• /
• 2009

As a novel method to produce a steel beam with 6mm thickness for buildings, a continuous roll forming process is reported. The roll shape is asymmetric and consists of 6 pairs of rollers to bend the steel plate from $0^{\circ}$ to $90^{\circ}$. Results obtained upon application of the roll forming process showed that the angle of the section plate is $90^{\circ}$. However, defects such as bowing and camber as high as 3.2 [$^{\circ}/m$] were observed. A FEM (Finite Element Method) analysis was applied to investigate the causes of the results for the region between rollers no. 5 and no. 6. The results of a FEM simulation of deformation and stress showed that there are some strong peak stresses on the upper surface and bottom surface of the material. The positions of the peak stresses did not show a correspondence between the upper and bottom surfaces. Thus, the defects in the process of roll forming with a 6 mm thick steel plate occur by the unbalanced stresses between the upper surface and bottom surface of the material in this study.

• 정보보호학회논문지
• /
• 제14권4호
• /
• pp.39-47
• /
• 2004

JPEG 영상을 이용하여 심층암호 통신을 하는 알고리즘의 대부분은 양자화 된 DCT 계수의 최하위 비트를 치환하여 메시지를 삽입하는데, 대표적인 심층암호 알고리즘으로는 Jsteg$^{(1)}$ , JP Hide ＆ Seek$^{(2)}$ , F5$^{(3)}$ , OutGuess$^{(4)}$ 등이 있다. Jsteg, JP Hide ＆ Seek 는 $\chi$$^2$-테스트$^{(4)}$ 로도 비밀데이터 삽입 여부를 탐지할 수 있지만, 탐지율이 낮은 편이다. 본 논문에서는 Fridrich의 블록 왜곡도 분석 기법$^{(5)}$ 을 보완하여 탐지과정을 단순화하였으며 탐지율도 기존의 방식보다 향상시켰다. 또한 Jsteg, JP Hide ＆ Seek를 이용한 실험 결과, 데이터 삽입 여부를 100%로 탐지하였다.

• 대한영상의학회지
• /
• 제83권3호
• /
• pp.699-704
• /
• 2022

급성 산후 자궁내번증은 드문 산후합병증의 하나이나 생명을 위협할 수 있어 신속한 진단 및 적절한 치료가 중요하다. 다량의 출혈은 부분 자궁내번증을 진단하는데 어려움을 야기하며 치료를 지연시킬 수 있다. 본 증례는 다량의 산후 출혈을 주소로 온 32세 산모를 자궁동맥색전술을 통해 내번된 자궁의 기저부를 따라서 아래쪽으로 기울어져 주행하는 자궁동맥의 특이적인 주행을 발견하여 자궁내번증으로 빠르게 진단할 수 있었던 증례이다. 이를 통해 자궁동맥색전술은 효율적인 치료를 위한 중재시술뿐만 아니라 자궁내번증의 진단적 도구로 가치가 있음을 보여준다.

• Korean Journal of Radiology
• /
• 제22권7호
• /
• pp.1132-1141
• /
• 2021

Objective: To investigate changes in the median nerve, retinaculum, and carpal tunnel on ultrasound after successful endoscopic carpal tunnel release (ECTR). Materials and Methods: This prospective study involved 37 wrists in 35 patients (5 male, 30 female; mean age ± standard deviation [SD], 56.9 ± 6.7 years) with primary carpal tunnel syndrome (CTS). An in-house developed scoring system (0-3) was used to gauge the clinical improvement after ECTR. Ultrasound was performed before ECTR, and at 1, 3, and 12 months post-ECTR. Changes in the median nerve, flexor retinaculum, and carpal tunnel morphology on ultrasound after ECTR were analyzed. Ultrasound parameters for different clinical improvement groups were compared. Results: All patients improved clinically after ECTR. The average clinical improvement score ± SD at 12 months post-ECTR was 2.2 ± 0.7. The median nerve cross-sectional area proximal and distal to the tunnel decreased at all time intervals post-ECTR but remained swollen compared to normal values. Serial changes in the median nerve caliber and retinacular bowing after ECTR were more pronounced at the tunnel outlet than at the tunnel inlet. The flexor retinaculum had reformed in 25 (68%) of 37 wrists after 12 months. Conclusion: Postoperative changes in median nerve and retinaculum parameters were most pronounced at the tunnel outlet. Even in patients with clinical improvement after ECTR, nearly all ultrasound parameters remain abnormal at one year post-ECTR. These ultrasound parameters should not necessarily be relied upon to diagnose persistent CTS after ECTR.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.80-81
• /
• 2012

Recently, one of the critical issues in the etching processes of the nanoscale devices is to achieve ultra-high aspect ratio contact (UHARC) profile without anomalous behaviors such as sidewall bowing, and twisting profile. To achieve this goal, the fluorocarbon plasmas with major advantage of the sidewall passivation have been used commonly with numerous additives to obtain the ideal etch profiles. However, they still suffer from formidable challenges such as tight limits of sidewall bowing and controlling the randomly distorted features in nanoscale etching profile. Furthermore, the absence of the available plasma simulation tools has made it difficult to develop revolutionary technologies to overcome these process limitations, including novel plasma chemistries, and plasma sources. As an effort to address these issues, we performed a fluorocarbon surface kinetic modeling based on the experimental plasma diagnostic data for silicon dioxide etching process under inductively coupled C4F6/Ar/O2 plasmas. For this work, the SiO2 etch rates were investigated with bulk plasma diagnostics tools such as Langmuir probe, cutoff probe and Quadruple Mass Spectrometer (QMS). The surface chemistries of the etched samples were measured by X-ray Photoelectron Spectrometer. To measure plasma parameters, the self-cleaned RF Langmuir probe was used for polymer deposition environment on the probe tip and double-checked by the cutoff probe which was known to be a precise plasma diagnostic tool for the electron density measurement. In addition, neutral and ion fluxes from bulk plasma were monitored with appearance methods using QMS signal. Based on these experimental data, we proposed a phenomenological, and realistic two-layer surface reaction model of SiO2 etch process under the overlying polymer passivation layer, considering material balance of deposition and etching through steady-state fluorocarbon layer. The predicted surface reaction modeling results showed good agreement with the experimental data. With the above studies of plasma surface reaction, we have developed a 3D topography simulator using the multi-layer level set algorithm and new memory saving technique, which is suitable in 3D UHARC etch simulation. Ballistic transports of neutral and ion species inside feature profile was considered by deterministic and Monte Carlo methods, respectively. In case of ultra-high aspect ratio contact hole etching, it is already well-known that the huge computational burden is required for realistic consideration of these ballistic transports. To address this issue, the related computational codes were efficiently parallelized for GPU (Graphic Processing Unit) computing, so that the total computation time could be improved more than few hundred times compared to the serial version. Finally, the 3D topography simulator was integrated with ballistic transport module and etch reaction model. Realistic etch-profile simulations with consideration of the sidewall polymer passivation layer were demonstrated.