• Journal of Korean Tunnelling and Underground Space Association
• /
• v.10 no.3
• /
• pp.283-293
• /
• 2008

A study of interactive ground behaviour due to tunnelling adjacent to existing piles has not been recognized well for the most geotechnical engineers so far. Because this is a very sophisticated boundary condition problem. In this study, therefore, the author has conducted both the laboratory model test and finite element analysis (FEA) to figure out such a complicated ground behaviour related to shear strain formations. Based on the model testing and FEA results, a boundary line which divides into two distinctive shear strain formations in relation to the locations of end-bearing pile tips was proposed. The author believes that the proposed boundary line may be helpful for planning the appropriate tunnel positions for avoiding damage of buildings which supported by piled-foundations in urban areas.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.2
• /
• pp.44-51
• /
• 1992

This paper is concerned with the propram of the automatic mesh generation for 2-dimensional domain which contains the curved boundaries and holes. This program treats a new vertical-line drawing method. This method starts with 4-subdivisions of problem domain and the classification of the cross points of grid lines and boundaries. The new node is generated by the vertical line to the line connecting the two intersections of a boundary and two grid lines in gereral. And the node very close to the boundary is moved to the boundary. The automatic mesh generation composed of only rectangular elements is achieved by this procedure. The boundaries are piecewise-curves composed of lines, circles, arcs, and free curves. The free curves are generated by B-Spline form. Although there were some bad elements for the complex boundary, it was possible to obtain the acceptible rectangular elements for the given boundaries.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.37 no.7
• /
• pp.427-433
• /
• 1988

This paper presents a partitioned state estimation algorithm on the basis of network reduction by using a estimation technique of boundary line flows. The network is partitioned into several subnetworks, which generates boundary lines. The accurate estimation of boundary line flows enables us to perform state estimation on each sub-system independently. A precise method to estimate boundary line flows is presented for the partitioned state estimation. The proposed algorithm redices computation time and memory requirements remarkably. The proposed algorithm have been tested for IEEE sample system and verified to be applicable to practical power systems.

• International Journal of Control, Automation, and Systems
• /
• v.2 no.1
• /
• pp.55-67
• /
• 2004

In this paper, an active vibration control of a translating steel strip in a zinc galvanizing line is investigated. The control objectives in the galvanizing line are to improve the uniformity of the zinc deposit on the strip surfaces and to reduce the zinc consumption. The translating steel strip is modeled as a moving belt equation by using Hamilton’s principle for systems with moving mass. The total mechanical energy of the strip is considered to be a Lyapunov function candidate. A nonlinear boundary control law that assures the exponential stability of the closed loop system is derived. The existence of a closed-loop solution is shown by proving that the closed-loop dynamics is dissipative. Simulation results are provided.

• Structural Engineering and Mechanics
• /
• v.76 no.2
• /
• pp.239-250
• /
• 2020

This paper deals with free vibration of plates with steps and internal line supports by using a modified matched interface and boundary (MMIB) method. Different kinds of interfaces caused by steps, rigid and elastic line supports and their combinations are taken into account. Detailed MMIB procedures for dealing with these different interfaces are presented. Various examples are chosen to illustrate the accuracy and convergence of MMIB method. Numerical results show that the proposed MMIB is a highly accurate and convergent approach for solving the title issue. This study will extend the application range of MMIB method.

• Journal of the Korean Mathematical Society
• /
• v.46 no.6
• /
• pp.1243-1254
• /
• 2009

The inverse scattering problem is investigated for some second order differential equation with a nonlinear spectral parameter in the boundary condition on the half line [0, $\infty$). In the present paper the coefficient of spectral parameter is not a pure imaginary number and the boundary value problem is not selfadjoint. We define the scattering data of the problem, derive the main integral equation and show that the potential is uniquely recovered.

• Journal of the Korean Mathematical Society
• /
• v.45 no.1
• /
• pp.79-95
• /
• 2008

The local existence of solutions for the initial-boundary value problem of a generalized Boussinesq equation on the half line is considered. The approach consists of replacing he Fourier transform in the initial value problem by the Laplace transform and making use of modern methods for the study of nonlinear dispersive wave equation

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.2
• /
• pp.151-157
• /
• 1990

This paper presents a method for rapid wire frame drawing of the 3D objects represented by the CSG scheme. When the two CSG trees are combined into one, the intersection parts of the polygons constituting the object corresponds to each subtree are computed, and the boundary representation of the combined object is obtained according to the given combinational operator and stored in the root node. The boundary representation in the root node is used in the wireframe drawing of the object and later computation of boundary representation. Bezier surface is taken as one of the primitive object the scan-line algorithm is used, which subdivides each scan-line into the spans where no polygon is intersected, and renders each span with the CSG representation of the object.

• Phonetics and Speech Sciences
• /
• v.2 no.3
• /
• pp.11-22
• /
• 2010

The present study attempts to investigate declination in Korean and its relevant aspects to the length of utterance, the clause boundary, and focus. More specifically, I examine the relation of declination with the length of utterance, the declination reset at the clause boundary, and the effect of focus on declination. Results showed that the length of utterance had no relation with the first and last pitch values of the utterance but that they were consistent regardless of the length of utterance. However, the declination slope changed to be relatively gentle from the fourth accentual phrase to the end of the whole intonational phrase. There was a reset of declination in such a way that the first pitch in the second phrase was always lower than that of the first phrase, but the first pitch in the third phrase was not always lower than that of the second phrase when the whole utterance was composed of three phrases. Finally, the pitch values of the focusing words decreased as their position went back in a sentence. One declination line was formed in the case of focused utterance, but in the case of an utterance that contained a clause boundary, a new declination line was formed at the start of each new clause. These findings can be applied to developing a Korean speech synthesizer that contains natural prosody; they can be also utilized for teaching Korean prosody.

• Lingua Humanitatis
• /
• v.8
• /
• pp.265-289
• /
• 2006

The geographical characteristics of Yeongdong(永同) the southernmost part of the Chungcheongbukdo province, has attracted attention among the academic circle as one of the dialectal contact regions since it adjoins the Gyeongsang and Jeolla dialects. Unlike the local language in Mooju (Jellado dialect) adjacent to the Southwest part, the local language in Yeongdong is quite different from that of Kimcheon (Gyeongsang dialect). More specifically, it is noteworthy that the boundary line of the Gyeongsang dialect is found in this region, which is different from the administrative division. In other words, the local language in Yeongdong is divided into the Chungcheong dialect and the Gyeongsang dialect, and furthermore each dialect region still has the characteristics of the other region's dialect. For example, the phonological structure of Yeongdong Chungcheongdo dialect has very unique characteristics of the fudged dialect, which is seemingly influenced by the Gyeongsang dialect. The present study is to define the bottom boundary line of the southeast area of the Chungcheong dialect by identifying the boundary line between the Gyeongsang dialect and the Chungcheong dialect, and to clarify its specific sound system generated by the contact of these two dialects. For this, the author collected and analyzed data of the local language around Yeongdong and adjacent areas. It was found that Cheongwha-ri, Deokjin-ri, and Sanjeo-ri at Yeongsan-myeon, and Mugeunjeom, Sangga-ri, and Jungga-ri at Yeongdong-eup, among the regions that belongs to Chungcheong dialect within the local language of Yeongdong, show the characteristics of the Gyeongsang dialect. Accordingly, the western areas of these villages become the southeast boundary line of the Chungcheong dialect. Also, the unique phonological characteristics of the Yeongdong Chungcheong dialect is affected by the Gyeongsang dialect, among which "rhythms, y deletion, nasal phoneme deletion, and w deletion" appeared. It is thought to be the unique fudged dialectal phenomenon that appeared only in this region. The research result is expected to be of some help in finding out various aspects of dialectal contacts as well as clarifying the phonological features of the local language in Yeongdong, and thereby contributing to exact divisioning of the Chungcheong dialect.