• 한국멀티미디어학회논문지
• /
• 제14권10호
• /
• pp.1252-1261
• /
• 2011

본 논문은 내용기반 동영상 분할을 위한 장면의 유사도 패턴 비교 방법을 제안한다. 동영상 장면 전환의 종류는 크게 급진적 전환과 디졸브(dissolve), 페이드인(fade-in), 페이드아웃(fade-out), 와이프 전환(wipe transition)을 포함하는 점진적 전환 형태로 나눌 수 있다. 제안하는 방법은 모든 종류의 장면 전환 검출 문제를 단지 발생 유무의 문제로 간단 정의하고, 장면 전환 종류는 별도로 구분하지 않는다. 장면 전환을 검출하기 위해서는 프레임간의 유사도를 정의해야 한다. 본 논문에서는 장면 내 유사도(within similarity)와 장면 간 유사도(between similarity)를 정의하며 두 유사도의 통계적 패턴 비교를 통하여 최종적으로 장면 전환을 검출하게 된다. 장면 내 유사도와 장면 간 유사도의 비율을 구하는 방법을 통해 플래시라이트나영상 내 물체 움직임에 대한 거짓 양성 검출을 별도의 후처리 과정 없이도 방지할 수 있음을 확인하였다. 프레임의 특징 값으로는 컬러 히스토그램과 프레임 내 평균 화소값을 이용하였다. TREC-2001, TREC-2002 동영상 셋을 포함한 실험 셋에서 성능을 평가한 결과 제안하는 알고리즘의 경우 총 91.84%의 재현율(recall)과 86.43%의 정확도(precision)의 성능을 보임을 확인할 수 있었다.

• 대한기계학회논문집B
• /
• 제23권8호
• /
• pp.969-977
• /
• 1999

A similarity solution of a steady laminar flow of micropolar fluids past wedges has been studied. The similarity variables found by Falkner and Skan are employed to reduce the streamwise-dependence in the coupled nonlinear boundary layer equations. Numerical solutions of the equations are then obtained using the fourth-order Runge-Kutta method and the distribution of velocity, micro-rotation, shear and couple stress across the boundary layer are obtained. These results are compared with the corresponding flow problems for Newtonian fluid past wedges with various wedge angles. Numerical results show that, keeping ${\beta}$ constant, the skin friction coefficient is lower for a micropolar fluid, as compared to a Newtonian fluid. For the case of constant material parameter K, however, the velocity distribution for a micropolar fluid is higher than that of a Newtonian fluid.

• 한국콘텐츠학회논문지
• /
• 제9권2호
• /
• pp.43-50
• /
• 2009

본 연구에서는 고유의 비디오 프레임의 특징 데이터를 추출하고 추출된 특징 데이터를 1차 신호로 생성하여 유사한 비디오 프레임 데이터를 검출하는 방법에 관하여 연구하였다. 비디오 간의 유사도 검출을 위하여 유사한 프레임간의 경계를 얻어낸 후 경계 범위 내에서 대표 프레임을 얻어낸다. 생성된 대표 프레임으로부터 blurring 된 프레임을 생성하고, DOG 값을 이용하여 특징 데이터를 추출한다. 이렇게 생성된 특징 데이터를 1차원 신호로 나열하고 콘텐츠 간 유사도를 비교한다. 실험 결과 잡음 첨가, 회전 변환, 크기 변환, 프레임 절삭, 프레임 제거 공격에 대해서도 유사도 수치 0.9 이상의 매우 강인한 특성을 나타냈다.

• Journal of applied mathematics & informatics
• /
• 제31권5_6호
• /
• pp.631-642
• /
• 2013

In this paper we reconsider the problem of steady mixed convection boundary-layer flow over a vertical flat plate studied in [6],[7] and [13]. Under favorable assumptions, we prove existence of multiple similarity solutions, we study also their asymptotic behavior. Numerical solutions are carried out using a shooting integration scheme.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권7호
• /
• pp.729-735
• /
• 2005

This paper has dealt with the characteristics of mass and heat transfer of vertical flat plate with free convection. The theory of similarity transformations applied to the momentum and energy equations for free convection. To derive the similarity equation of mass transfer. the equation for conservation of species was added to the continuity. momentum and energy equations. The momentum, energy and species equations set numerically to obtain the velocity, temperature and mass fraction of species as dimensionless. For cases where momentum transport dominates, the thermal boundary layers are shorter than the momentum boundary layer. The relationships between momentum, energy and species were clarified from this study.

• 대한기계학회논문집B
• /
• 제21권3호
• /
• pp.371-379
• /
• 1997

A theoretical study for a forced uniform flow impinging on a rotating disk, typically involved in Chemical Vapor Deposition(CVD) and Vapor-phase Axial Deposition(VAD) processes, has been carried out. A set of exact solutions for flow and temperature fields are developed by employing a similarity variable obtained from force balance on a control volume near the disk. The solutions depend on the rotating speed of the disk, .omega., and the forced flow speed toward the disk, a. For constant forced flow speed, the overall boundary layer thickness decreases when the rotating speed increases. Approximately 5%, 15%, and 30% decreases of the thickness are obtained for .omega./a = 2, 5, and 10, respectively, compared to the case of .omega./a = 0 (axisymmetric stagnation point flow). For constant rotating disk speed the boundary layer thickness immediately decreases as the forced flow speed increases, compared to the case of .omega./a .rarw. .inf. (induced flow near a rotating disk). Effects of .omega. and a on heat transfer coefficient are studied and explained with the boundary layer characteristics.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권7호
• /
• pp.779-784
• /
• 2005

This paper presents the theory of similarity transformations applied to the momentum and energy equations for laminar, forced, external boundary layer flow over a horizontal flat plate which leads to a set of non-linear, ordinary differential equations of phase change material slurry(PCM Slurry). The momentum and energy equation set numerically to obtain the non-dimensional velocity and temperature profiles in a laminar boundary layer are solved. The heat transfer characteristics of PCM slurry was numerically investigated with similar method. It is clarified that the similar solution method of Newtonian fluid can be used reasonably this type of PCM slurry which has low concentration. The data of local wall heat flux and convective heat transfer coefficient of PCM slurry are higher than those of water more than 150$\~$200$\%$, approximately.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권1호
• /
• pp.25-30
• /
• 2000

In present paper, mass transfer over a flat plate with film condensation including noncondesable gas is analyzed with the help of similarity methods. Couette flow was assumed in liquid film and boundary-layer approximation was used in the ambient flow. Governing equations were transformed into the ordinary differential equtions by the similarity methods. Runge-Kutta and shooting method were used in order to fine the effect of mass transfer on the velocity and concentrations at the liquid-vapor interface.

• 한국항공우주학회지
• /
• 제32권10호
• /
• pp.1-11
• /
• 2004

평판의 근접 후류에서 상류 경계층의 영향을 조사하기 위한 실험적 연구가 수행되었다. 트리핑 와이어(tripping wire)의 여러 부착 위치가 경계층의 유동조건을 유발시키기 위하여 선택되었다. 평판 앞전에서부터 0.98C 위치에서의 층류, 천이, 난류경계층이 대칭, 비대칭 후류의 발달과정을 조사하기 위하여 부과되었다. X형태의 열선 프로브(55P61)를 이용한 측정은 근접 후류의 8위치에서 수행되었고, 측정된 평균속도분포는 기존의 후류 상사변수로 무차원화 되어 제시되었다. 대칭 후류는 후류의 중앙부분에서 기존의 상사곡선과 일치하지만, 비대칭 후류는 측정된 범위에서 기존의 상사 곡선과 일치하지 않았다.

• Journal of Mechanical Science and Technology
• /
• 제14권6호
• /
• pp.690-698
• /
• 2000

The laminar boundary layer flow and heat transfer of anisotropic fluids in the vicinity of a wedge have been examined with constant surface temperature. The similarity variables found by Falkner and Skan are employed to reduce the stream wise-dependence in the coupled nonlinear boundary layer equations. The numerical solutions are presented using the fourth-order Runge - Kutta method and the distribution of velocity, micro-rotation, shear and couple stresses and temperature across the boundary layer are plotted. These results are also compared with the corresponding flow problems for Newtonian fluid over wedges. It is found that for a constant wedge angle, the skin friction coefficient is lower for micropolar fluid, as compared to Newtonian fluid. For the case of the constant material parameter K, however, the magnitude of velocity for anisotropic fluid is greater than that of Newtonian fluid. The numerical results also show that for a constant wedge angle with a given Prandtl number, Pr = I, the effect of increasing values of K results in increasing thermal boundary layer thickness for anisotropic fluid, as compared with Newtonian fluid. For the case of the constant material parameter K, however, the heat transfer rate for anisotropic fluid is lower than that of Newtonian fluid.