• Journal of Chest Surgery
• /
• v.30 no.11
• /
• pp.1117-1120
• /
• 1997

Ten cases with esophageal foreign body were treated surgically from July 1980 to October 1995 at the Departme t of Thoracic and Cardiovascular Surgery, Chungnam National University Hospital. The mean age was 45.3 years, with a range from 25 to 71. Out of ten cases, 6 were female and four were male. Common symptoms were dysphagia, fever, foreign body sensation and neck pain. Three cases of foreign bodies were of fish bones, two of bubble paclcage of drugs, one case of a Eeer bottle cap, one of a piece glass, one of a bathtub plug, one of chicken and one of a bean. The diagnosis was established by esophagography using a water soluble contrast material and esophagoscopy. Among of ten cases, two had esophageal stricture due to the ingestion of Aye at a young age. One case had experienced psychological problems. All foreign bodies were removed by surgical procedures. Five cases were treated by cervical esophagostomy, one case by right thoracotomy, one case by retrograde bougienation through gastrostomy and two cases by cervical incision and drainage for cervical abscess. Three cases developed pos operative esophageal leaks which healed spontaneously and transient hoarseness developed in one case. One case developed traumatic pneumothorax and subcutaneous emphysema which was treated by closed thoracostomy. There were no operative deaths. C(ocean J Thorac Cardiovasc Surg 1997;30:1117-20)

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.1 s.45
• /
• pp.155-160
• /
• 2007

Because output of multi-code CDMA system adapted high speed data transmission becoming multi-level system use linear amplifier in output stage and complex output signal. Therefore, Multi-Code CDMA system has shortcoming of high price, high complexity etc.. Binary CDMA technology that allow fetters in existing CDMA technology to supplement this shortcoming proposed. In binary CDMA system When correlator process high speed data, bottle-neck phenomenon is happened on synchronization acquisition process, it is very important parameter. Because existent correlator must there be advantage that power consumption is small but flow addition of several stages to receive correlation's value, the processing speed has disadvantage because the operation amount is much. Therefore in this paper, proposed correlator has characteristic such as data is able to high speed processing, chip area is independent and power consumption is constant in structure in binary CDMA system.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.3
• /
• pp.275-281
• /
• 2011

One of the major technology issues in the ship production processes is the curved hull forming process that is a bottle neck and performed by experienced workers. In order to automate the curved hull forming process, there are a lot of attempts to develop the automation system by many shipbuilding companies and academic labs. However they have some problems which put the developed system in the difficulties to be used and maintained in the yard. In this paper, the problems are formed and solved by using tailored Systems Engineering Process which consists of four steps, those are requirement definition, system design, implementation of subsystem and components, and system integration and verification. A prototype for the proposed system development methodology is implemented. From the consideration of the prototype implemented, it is verified that this methodology can be an alternative to solve the problems.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.3 no.3
• /
• pp.177-182
• /
• 2008

Because output of multi-code CDMA system adapted high speed data transmission becoming multi-level system use linear amplifier in output stage and complex output signal. Therefore, Multi-Code CDMA system has shortcoming of high price, high complexity etc. Binary CDMA technology that allow fetters in existing CDMA technology to supplement this shortcoming proposed. In binary CDMA system When correlator process high speed data, bottle-neck phenomenon is happened on synchronization acquisition process, it is very important parameter. Because existent correlator must there be advantage that power consumption is small but flow addition of several stages to receive correlation's value, the processing speed has disadvantage because the operation amount is much. Therefore in this paper, proposed correlator has characteristic such as data is able to high speed processing, chip area is independent and power consumption is constant in structure in binary CDMA system.

• The KIPS Transactions:PartA
• /
• v.18A no.2
• /
• pp.61-68
• /
• 2011

Memory error debugging is one of the most critical processes in improving software quality. However, due to the extensive time consumed to debug, the enhancement often leads to a huge bottle neck in the development process of mobile devices. Most of the existing memory error detection tools are based on static error detection; however, the tools cannot be used in mobile devices due to their use of large working memory. Therefore, it is challenging for mobile device vendors to deliver high quality mobile devices to the market in time. In this paper, we introduce "PinMemcheck", a pin-based memory error detection tool, which detects all potential memory errors within $1.5{\times}$ execution time overhead compared with that of a baseline configuration by applying the Pin's binary instrumentation process and a simple data structure.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.11
• /
• pp.1197-1207
• /
• 2012

This study provides information for the design of pediatric inpatient uniforms with functionality and aesthetic beauty through a questionnaire-survey of the conditions of providing, wearing, preferences and improvement requirements for pediatric inpatient uniforms. As a result of the survey, intravenous injections were mostly given on the back of the hand, and the method of changing uniforms after intravenous injections was (in most cases) to pass the injection bottle through a sleeve or pant leg while the needle is inserted. The respondents answered that the sleeve length and pant length did not match. As a result of the preference of the pediatric inpatient design survey, respondents indicated they preferred pajama type, yellow color and medium size animal patterns. A similar ratio of set-in and raglan with no collar but with 3/4 length sleeve of round neck, front end, sleeve top opening, button closing and two pockets were preferred for shirts; however, a 3/4 length with rubber string on the waist, no opening and inner opening were preferred at the same ratio for pants. As for the method to adjust the length to assign functionality to pediatric inpatient uniforms, the most preferred sleeve was a roll-up sleeve with a strap and the most preferred pants were length adjusted pants that used a strap for both shirts and pants with a both sides strap. In addition, the majority of the respondents answered that a hand wrapper that protects the injection location during intravenous injections needs be developed. As for the development type, a half glove type and glove type were preferred in sequential order.

• Journal of Convergence for Information Technology
• /
• v.11 no.8
• /
• pp.8-13
• /
• 2021

The purpose of this study is to propose a throughput costing as a performance measurement tool to measure cost indicators, which are one of the indicators for evaluating organizational performance in a smart factory manufacturing environment. An empirical study by questionnaire was conducted, and 60 experts were surveyed to verify the hypothesis. As a result of the study, it was concluded that the information provided based on throughput costing is helpful in cost measurement and in evaluating organizational performance efficiency and effectiveness, and it was confirmed that this method has usefulness to support the planning and control process. It is proposed that the use of throughput costing by constraint theory, which can maximize throughput and optimize inventory levels in the manufacturing process, can find solutions to bottlenecks affecting the efficiency and effectiveness of organizational performance.

• Quality Improvement in Health Care
• /
• v.2 no.2
• /
• pp.20-30
• /
• 1996

Background : Theoretically as the waiting-time of patient is estimated in queueing, many men and much money are needed. But being the estimation of patient s waiting-time very important in hospital service, so the continuous monitoring of waiting-time is inevitable. To verify that the estimation of waiting-time using parking time is economical, effective and continuous monitoring method and to develop utilizing the method, this study was done. Method : In parking confirmation office, the personnel of parking office wrote parking confirm time, chart number and whether medical examination and treatment finish or not in parking ticket. The next day the parking tickets were gathered and the above data were input. The input parking data were connected with the hospital outpatient file indexing chart number. Then the patient' s data for department, new patient or not, reservation or not, receipt time and payment time were retrieved. The group for finishing medical treatment were compared with that for not finishing in average time lag between confirmation and out-time for hospital. And In-time for hospital, receipt time, payment and out-time for hospital were also analyzed. Result : Confirming parking ticket, the group for finished medical treatment left hospital after 7 minutes. This result showed that the patient for finished medical treatment left hospital immediately. So parking time was reasonable to estimation of hospital-time was concluded. The time for medical treatment, diagnosis and test was constant for all patients and short for waiting time, Then I concluded that the parking time was reasonable for estimation patient's waiting time. Overall patient's waiting time was 113 minutes and new patient's time was 149 minutes, old patient's times was 109 minutes. Waiting time for reservation patient was 98 minutes and for non reservation patient was 122 minutes. The time from hospital arrival to payment was 50 minutes for the group of reservation patient and 69 minutes for non-reservation group. The time from payment to hospital leaving was 51 minutes and 56 minutes for non reservation group. The short time difference between reserved group and not reserved group from payment to hospital leaving time was due to bottle neck effect. Conclusion : The estimation of patient's waiting time using parking time was reasonable because the possession of car was common and the time for medical treatment was equal and the patient after treatment left hospital immediately. Using this method, timely, fast evaluation and continuous monitoring of the intervention effect were possible.

• Journal of the Korea Society for Simulation
• /
• v.17 no.2
• /
• pp.63-74
• /
• 2008

The design of best efficient production process is common requirements of the production strategy department and the process planning department to maximize the revenue and accomplish target production volumes in the production periods. And they use several general methods for that-line-balancing, removing of the bottle-neck process, facility ramp-up, increasing of the worker's utilization, etc. But, those methods have depended on analytic, static and arithmetic calculations, yet. So, irregular work-waiting time causing the delay time isn't include in extracting production capacity, especially in the line production process. The work-waiting time is changed irregularly along the variation of each machine and very important for calculate real product lead-time and forecasting target production volumes. At this thesis, i'm going to mention the importance of the delay time of conveyor system which can be extracted by discrete-event simulation. And suggest it as a new main variable that must be considered at designing new production system. Then experimented and tested that's effects in the H-company case, conveyor based line production process.

• Korean Journal of Optics and Photonics
• /
• v.10 no.6
• /
• pp.500-506
• /
• 1999

We designed and fabricated a bidirectional optical transceiver module for low cost access network. An integrated chip forming a pin-PD on an 1.3 urn FP-LD was assembled by flip-chip bonding on a Si optical bench, a single mode fiber with an angled end facet was aligned passively with the integrated chip on V-groove of Si-optical bench. Gaussian beam theory was applied to evaluate the coupling coefficients as a function of some parameters such as alignment distance, angle of fiber end facet, vertical alignment error. The theory is also used to search the bottle-neck between transmittance and receiving coupling efficiency in the bi-directional optical system. Tn this paper, we confirmed that reduction of coupling efficiency by the vertical alignment error between laser beam and fiber core axis can be compensated by controlling the fiber facet angle. In the fabrication of sub-module, a'||'&'||' we made such that the fiber facet have a corn shape with an angled facet only core part, the reflection of transmitted laser beam from the fiber facet could be minimized below -35 dE in alignment distance of 2: 30 /J.m. In the same condition, transmitted output power of -12.1 dEm and responsivity of 0.2. AIW were obtained.