• Proceedings of the Korean Environmental Health Society Conference
• /
• 2003.06a
• /
• pp.213-216
• /
• 2003

This study was conducted to estimate if the level of several chemical ingredients including alkanolamines or ethanolamines (EA) examined in the specific synthetic metalworking fluid (MWF) “A” can cause anti-microbial activity and health effect. Three water-based MWF products (“A”, “B”, and “C”) were studied every week for two months (from June 1, 2002 to July 30, 2002). Chemical ingredients such as formaldehyde, boron, EA, and copper were examined. In the sump where MWF “A” was used, not only the total level of EA, monoethanolamine(MEA), diethanolamine(DEA) and triethanolamine(TEA), but also boron level were significantly higher than those of the other MWFs. ANOVA statistical tests indicated that levels of pH, alkalinity, boron, MEA, DEA and TEA in MWF A were significantly higher than those in other MWF types. Correlation tests also found that levels of pH, alkalinity, boron, MEA, DEA and TEA in MWF “A” are significantly correlated. We suggested the assumptions that excessive concentrations of EA, and borate at a high pH level, may cause anti-microbial resistance synergically, To demonstrate this assumption, additional study is needed to examine the relationship between the levels of microbes and excessive concentrations of EA, and borate at a high pH level.

• Korean Journal of Optics and Photonics
• /
• v.17 no.1
• /
• pp.75-80
• /
• 2006

We studied feasibility of three-dimensional optical memory by utilizing femtosecond laser-induced changes of transmission in photopolymers and photoluminescence in Eu and Sm ion doped sodium borate glasses. We produced transmission change by two photon absorption and obtained sub-Um size spots in photopolymers using 780 nm modelocked Ti-sapphire laser pulses. We also changed valence state of Eu and Sm ions by multi-photon absorption and achieved $\~{\mu}m$ sized spot formation in Sm-doped glasses.

• Journal of the Korean institute of surface engineering
• /
• v.41 no.2
• /
• pp.43-47
• /
• 2008

Cubic boron nitride(c-BN) films were deposited on tungsten carbide insert tool by microwave plasma enhanced chemical vapor deposition(MPECVD) from a gas mixture of triethyl borate$(B(C_2H_5O)_3)$, ammonia $(NH_3)$, hydrogen$(H_2)$ and argon(Ar). The qualities of deposited thin film were investigated by x-ray diffrac-tion(XRD), field emission scanning electron microscopy(FE-SEM) and micro Raman spectroscope. The surface morphologies of the synthesised BN as well as crystallinity appear to be highly dependent on the flow rate of $B(C_2H_5O)_3$ and $(NH_3)$ gases. The deposited film had more crystallized phases with 5 scem of $B(C_2H_5O)_3$ and $(NH_3)$ gases than with 2 sccm, and the phase was identified as c-BN by micro Raman spectroscope and XRD. The adhesion strength were also increased with increasing flow rates of $B(C_2H_5O)_3$ and $(NH_3)$ gases.

• Journal of the Korean Chemical Society
• /
• v.27 no.4
• /
• pp.262-267
• /
• 1983

A study has been carried out for a scheme of the selective extraction and determination of cesium, sodium and nuclides by the ion association with dicyclohexyl-24-crown-8 and sodium tetraphenylborate from primary coolant of a pressurized water reactor. For that purpose, the effects of hydrogen, cesium and borate ions on the extraction have been investigated. Interferences of iodine and xenon nuclides were found but could be removed by reducing with sodium thiosulfate and back extraction with 1 N hydrochloric acid solution, respectively.

• Journal of Korea Foundry Society
• /
• v.28 no.6
• /
• pp.268-272
• /
• 2008

Interfacial characteristics of aluminum borate whisker reinforced AS52 matrix composite was investigated. Peak hardness of AS52 composite was obtained aging at $170^{\circ}C$ for 15h and the aging process was accelerated by the presence of the aluminium borate whisker. The MgO layer, which was the interfacial reaction product between the reinforcement and the Mg matrix, was produced with 20 nm thickness in as-cast condition. As the aging time increased, the thickness of the interfacial reaction layer increased to 50 nm in peak aged condition. The nano-indentation test results indicated that the strength of interface was improved by the aging but over-aging degraded the reinforcement and decreased the interfacial strength which resulted in the decrease of overall composite strength.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.12
• /
• pp.1799-1804
• /
• 2003

Acetolatate synthase(ALS) catalyzes the first common step in the biosynthesis of valine, leucine, isoleucine in plants and microorganisms. ALS is the target of several classes of herbicides, including the sulfonylureas, the imidazolinones, and the triazolopyrimidines. To elucidate the roles of arginine residues in tobacco ALS, chemical modification and site-directed mutagenesis were performed. Recombinant tobacco ALS was expressed in E. coli and purified to homogeneity. The ALS was inactivated by arginine specific reagents, phenylglyoxal and 2,3-butanedione. The rate of inactivation was a function of the concentration of modifier. The inactivation by butanedione was enhanced by borate, and the inactivation was reversible on removal of excess butanedione and borate. The substrate pyruvate and competitive inhibitors fluoropyruvate and phenylpyruvate protected the enzyme against inactivation by both modifiers. The mutation of well-conserved Arg198 of the ALS by Gln abolished the enzymatic activity as well as the binding affinity for cofactor FAD. However, the mutation of R198K did not affect significantly the binding of FAD to the enzyme. Taken together, the results imply that Arg198 is essential for the catalytic activity of the ALS and involved in the binding of FAD, and that the positive charge of the Arg is crucial for the interaction with negatively charged FAD.

• Nuclear Engineering and Technology
• /
• v.24 no.3
• /
• pp.219-227
• /
• 1992

An experiment was conducted to determine the reaction of boric acid with lime and the drying of its product using a reactor-dryer. no characteristics of dried products were observed. The major chemical species of dried Products was calcium borate of 2CaO.B$_2$O$_3$. From the particle size distribution of the dried products, it was found that quick lime was better than slaked lime as an additive. The Ca/B mole ratio of reaction was determined to be 3/4 considering the cohesion and agglomeration properties of dried products. The flowability of dried products up to 8 wt% of water content was acceptable for transport process and to reduce drying time.

• Journal of the Korean Ceramic Society
• /
• v.43 no.9 s.292
• /
• pp.544-551
• /
• 2006

The sealing technique between a glass tube and a copper heat pipe in an evacuated tube solar collector is studied. In this study two different sealing techniques, such as flame method and furnace firing, are examined. After the sealing of a copper to a glass, the oxidation state of the copper and its bonding morphology were examined by SEM and XRD. Its oxidation was retarded by coating of borate solution on the copper, and $Cu_2O(cuprite)$ turned into CuO(tenorite) with increase in a firing temperature and firing time. Porous structure was found in the oxide layer when CuO formed. The best sealing morphology was observed when the thickness of the oxidation layer was less than $20{\mu}m$. The sealing technique performed in a furnace was promising and the satisfactory result was obtained when the sample was fired at $950^{\circ}C$ for 5 min under $N_2$ atmosphere. Annealing procedure is recommended to remove the stress left at the bonding zone.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.5
• /
• pp.459-462
• /
• 1999

Recent advances in NLO Borate Crystals for UV Generation are reviewed with the particular emphasis on the technique to improve the life time of UV optics. The laser-damage resistance of CLBO and fused silica surfaces was successfully improved after removing polishing compound by ion beam etching. The polishing compound embedded in the CLBO and fused silica surfaces were to a depth of less than 100nm. We were able to remove polishing compound without degrading the surface condition when the applied ion beam voltage was less than 200 V. The laser-induced surface damage threshold of CLBO was improved up to 15J/$\textrm{cm}^2$(wavelength: 355 nm, pulse width: 0.85 ns)as compared with that of the as-polished surface (11 J/$\textrm{cm}^2$). The laser-induced surface damage of fused silica also increased from 7.5J/$\textrm{cm}^2$ to 15J/$\textrm{cm}^2$. For the irradiation of a 266 nm high-intensity and high-repetition laser light, the surface lifetime of CLBO and fused silica could be more doubled compared with that of the as-polished surface.

• Korean Journal of Materials Research
• /
• v.18 no.2
• /
• pp.107-111
• /
• 2008

[ $BaO{\cdot}Nd_2O_3{\cdot}5TiO_2$ ] (BNT) ceramics modified with a borate glass containing Ba, Nd and Ti as glass constituents were investigated with regard to their sintering behavior and microwave dielectric properties. An addition of iso-component glass significantly improved the sinterabilty of the BNT ceramics and lowered the sintering temperature. A maximum density of $5.29\;g/cm^3$ and an x-y shrinkage of 17% were obtained for BNT ceramics containing 10wt.% of the glass sintered at $1100^{\circ}C$. The dielectric composition without the glass additive was only slightly densified at $1100^{\circ}C$. The resulting sample exhibited two crystalline phases, $BaNd_2Ti_5O_{14}$ and $Ba_2Ti_9O_{20}$, regardless of sintering temperature and glass content. When >10wt.% glass was added, exaggerated grain growth with a less uniform microstructure was found, resulting in the subsequent reduction of the fired density and the dielectric properties. BNT ceramics containing 10wt.% of the isocomponent glass sintered at $1100^{\circ}C$ for 4 h showed promising dielectric properties of k = 71.3 and Q = 1,330.