• Archives of Plastic Surgery
• /
• v.38 no.5
• /
• pp.602-608
• /
• 2011

Purpose: Nasal bone fracture is the most common type of facial bone fracture and most of nasal bone fracture is combined with septal fracture frequently. Nasal septum is important to support the distal nose and to maintain the nasal airway. But nasal septal fractures are usually unrecognized and untreated at the time of operation. Recently, various materials were using for nasal packing after closed reduction, however these materials are not focused on the correction of nasal bone and nasal septal fracture and many patients are suffered from nasal packing materials. Thus, the purpose of this study is to compare routine packing materials and rolled silastic sheet with respect to postoperative effect of correction of nasal bone fracture and discomfort of nasal packing materials. Methods: We examined 320 patients treated nasal bone fracture from January 2008 to December 2010. For Group I (n=92), $Merocel^{(R)}$ was used for nasal packing, for Group II (n=152) vaseline gauze was used, and Rolled silastic sheet (RSS) with vaseline gauze packing (VGP) was used for Group III (n=76). Under the general anesthesia, all patients were operated by closed reduction and nasal packing was done using three kinds of packing materials. At the time of postoperative 7 days, packing material was removed and studied for pt's satisfaction and postop. complications. Results: In patients with RSS with VGP, the complaints (nasal obstruction, foreign compressive sensation and discomfort during food ingestion) of keeping the nasal packing were decreased ($p$ <0.05) and the postoperative complication (deviation) were decreased comparing to vaseline gauze packing and $Merocel^{(R)}$ packing, however, these differences were not statistically significant ($p$ >0.05). Conclusion: Postoperative nasal packing with RSS with VGP was more comfortable to the patients and it was more effective method to correct the nasal bone fracture and nasal septal fracture.

• The Journal of the Korean bone and joint tumor society
• /
• v.17 no.2
• /
• pp.73-78
• /
• 2011

Purpose: This study was aimed to evaluate the result of inlay cortical strut bone grafts for large cysts or cavitary bone lesions in long bones. Materials and Methods: Seven patients with large cyst or cavitary bony lesions were managed with curettage, allogeneic inlay cortical strut and cancellous bone grafts. Additional plate and screw fixations were performed in 6 patients. There were three SBCs, two FDs with secondary ABC changes, one FD and one post-cement spacer removal state. Three of them had pathologic fractures. Progression of bone healing and mechanical support and functional result were evaluated. The mean follow-up period was 25.4 months. Results: Incorporations into host bones were progressed in all, average 4.2 months in six metaphyseal regions and 5.8 months in five diaphyseal regions respectively. Full structural supports were achieved in all except one patient without any additional procedures. No allograft-related complication was developed. Mean functional score according to the MSTS criteria was 29.6 at last follow up. Conclusion: Inlay cortical strut graft provided additional mechanical stability and bone stock for screw purchase in large cyst or cavitary defects of long bones, which allow early mobilization and excellent functional outcome.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.20 no.2
• /
• pp.166-172
• /
• 1998

Missing of the upper posterior dentition can cause alveolar bone resorption & pneumatization of Maxillary sinus wall, which makes traditional implant placement impossible, The solution includes various methods to the posterior maxilla to provide adequate bone support for implant installation and long-term survival. -- sinus floor elevation, sinus-lift graft, inlay graft using LeFort I osteotomy, onlay graft, This is a clinical Sr. retrospective study on implant surgery & prosthodontic restoration with upper edentulous posterior jaw from Jan. 1990. to Jun. 1997 at implant clinic of Chonbuk National University Hospital. The results obtained were as follows: 1. Six hundred ninety-nine implants were placed on upper posterior jaw of two hundred seventeen patients, among them one hundred sixty-five implants were placed in forty-four patients with sinus lift. 2. The height of the remained alveolar bone was classified on the base of Misch's concept. This included seventy-nine SA-1s, ninety-seven SA-2s, sixty-five SA-3s and sixty SA-4s. 3. Ninety percent of implants were successfully integrated in non-grafted area and eighty-seven percent of implants were successully integrated in sinus lift area.

• Korean Journal of Community Nutrition
• /
• v.9 no.1
• /
• pp.38-46
• /
• 2004

Few studies have conducted the bone health benefits of usual dietary isoflavone intake in Korean college-student women. To elucidate this benefitial effects and correlations between dietary isoflavone and nutrients intake and bone formation marker (ALPase, osteocalcin), questionnaires, anthropometric measurements, serum mineral (Ca, P, Mg) concentrations were analyzed. Fifty three subjects were used in this study. The average age, height, body weight, BMI, body fat content and triceps skinfold thickness were 21.43 year, 161.07 cm, 52.81 kg, 20.48 kg/$m^2$, 20.72% and 17.59 mm respectively. Soy food intake frequencies were soybean > soybean curd > soypaste stew > soybean milk. The average calorie, protein and Ca intake were 1766.21 $\pm62.54 kcal\;66.45\pm2.00 g\;and\; 549.62 \pm 27.55 mg$ respectively. Serum ALPase activity and osteocalcin concentration were 115.74$\pm3.6u/L$ and 7.15 ng/$m\\ell$ respectively. Usual dietary isoflavone intake was positively related to calory, protein, Ca, P intake and serum Ca, Mg concentration. Serum osteocalcin concentration was negatively correlated with isoflavone intake ($r^2$=0.28, p < 0.05). In these results, usual dietary isoflavone can support an additive effect to bone health and Ca nutrition.

• Journal of Nutrition and Health
• /
• v.36 no.7
• /
• pp.684-690
• /
• 2003

This study has investigated the bioavailability of calcium in eggshell powder (ESP) for the purpose of reutilizing eggshells as the calcium source. The experiment was designed 2 ${\times}$ 2 factorial method with two sources, CaCO$_3$ and ESP, and two levels, 0.2% and 0.4% calcium. Weanling SD rats were assigned randomly to one of 4 groups and provided by one of the isocaloric, 20% casein based 4 different experimental diets for 4weeks. Deionized water was given and environment was kept from any contamination of minerals. The body weight, diet intake, feed efficiency ratio (FER), bone growth, Ca contents of bones, and apparent absorption were measured. FER (0.38 - 0.40) and kidney weight were not different among groups and the weight and length, Ca content, strength of two bones Tibia and Femur were not affected by Ca sources except Femur Ca content. Ca content of Femur was greater in ESP groups than that of CaCO$_3$ groups. The body weight gain, bone growth, the Ca contents and strength of bones were significantly greater in 0.4% calcium groups suggesting 0.2% calcium is not sufficient for the optimum growth in the growing rats. These results indicate that ESP be a proper Ca source comparable or superior to CaCO$_3$. However the apparent absorption rate of final 3 days of feeding did not support the observed results showing lower rate in ESP than CaCO$_3$ groups. Further study be needed in the absorption aspect.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.5
• /
• pp.527-532
• /
• 2000

A review of the literature, provided by a MEDLINE search from 1980 through June 1999, was performed. This study was screened that 649 patients received 679 sinus lift grafts in which 2056 implants were placed. The types of grafts in sinus augmentation were autogenous bone, corticocancellous block bone, allogenic bone, and a variety of alloplastic materials. Results of these grafts are presented. The most frequent complications was the infection of maxillary sinus. Long-term follow-up is necessary to advance the sinus elevation and to support posterior maxillary restorations.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.41 no.2
• /
• pp.109-115
• /
• 2015

Odontoma is the most common odontogenic benign tumor, and the treatment of choice is generally surgical removal. After excision, bone grafts may be necessary depending on the need for further treatment, or the size and location of the odontoma. Although the osteogenic capacity of a demineralized tooth was verified as early as 1967 by Urist and many other investigators, the cumbersome procedure, including a long demineralization time, may be less than comfortable for clinicians. A modified ultrasonic technology, with periodic negative pressure and temperature control, facilitated rapid and aseptic preparation of demineralized teeth for bone grafts. This approach reduces the demineralization time dramatically (${\leq}80$ minutes), so that the graft material can be prepared chairside on the same day as the extraction. The purpose of this article is to describe two cases of large compound odonotomas used as graft material prepared chairside for enucleation-induced bony defects. These two clinical cases showed favorable wound healing without complications, and good bony support for future dental implants or orthodontic treatment. Finally, this report will suggest the possibility of recycling the benign pathologic hard tissue as an alternative treatment option for conventional bone grafts in clinics.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.1
• /
• pp.32-47
• /
• 1995

The purpose of this study was to determine the displacement of prosthesis & abutment and the stress distribution patterns induced in the periodontium by applying force to the fixed prosthesis. Two levels of periodontal support were compared using two-dimensional finite element stress analysis after placement of 3unit or 4 unit fixed partial denture(FPD) in case of missing of the lower first molar. Concentrated vertical load was delivered at the cusp tip of the second bicuspid or the central fossa of the pontic. The following results were obtained : 1. The greater the loss of alveolar bone in abutment teeth area, the greater the displacement of FPD and the stress concentration in alveolar bone around abutment. 2. The amount and direction of displacement and distribution of stress in the 4-unit FPD was better than those in the 3-unit FPD. 3. Multiple abutments reduced the amount of mesial and downward displacement of the weaked abutments and more uniformly distributed the stresses.

• Physical Therapy Korea
• /
• v.30 no.4
• /
• pp.281-287
• /
• 2023

Background: The flexible flatfoot is characterized by a flattening of the foot arch due to excessive bodyweight. The use of shoe insoles or taping methods has been identified as effective in realigning the navicular or calcaneus bones and addressing supination in pronated feet. Objects: This study aimed to analyze the difference between the arch taping attachment method, introduced in a previous study, and a novel taping method designed to provide support to the inner aspect of the heel bone in cases of flexible flatfoot. Methods: A navicular drop test was performed to discriminate flexible flatfoot. To analyze the differences in pressure distribution during walking for each taping method, the subjects underwent testing in the barefoot state with no attachments. The procedure included a sequence of arch taping and heel taping. Subsequent analysis of pressure distribution during walking utilized the GaitRite^® system (GAITRite Gold, CIR Systems Inc.). Results: Arch taping and calcaneus taping significantly reduced the integrated pressure over time and peak pressure on the medial side of the midfoot for both feet compared to the barefoot state. Conclusion: The findings of this study suggest that supporting the inside of the heel through calcaneus taping, without direct stimulation to the longitudinal arch and navicular bone, is an effective intervention for flexible flatfoot.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.1
• /
• pp.123-128
• /
• 2011

Hull design for a small scale Oceanographic buoy will be introduced in this paper. The hull structure design, the connection methods between all parts will be discussed. We mainly introduce a design process of this buoy hull. We use walls with two layers and a radial bone structure to support the body to increase overall intensity and capacity to resist impact.