• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제33권5호
• /
• pp.425-429
• /
• 2011

Bone grafts are becoming increasingly common in oral and maxillofacial surgery to improve bone healing procedures. Bovine bone as a xenograft is a representative osteoconductor and space filler; however, sometimes complications, such as infection and wound dehiscence are encountered with its use. We report the result of an eight-year follow-up of a xenograft case and processing methods of inorganic bovine bone along with a review of the literature. Xenograft ($LUBBOC^{(R)}$) was used in a cyst enucleation site of the maxilla, as a bone substitute and space filler. Inflammation and infection were defined several times as lack of osseous contact between the graft and host bone, caused by remodeling failure over an eight-year period. Pathologic findings of the xenograft revealed dead bony trabeculae with inflamed fibrous tissue and actinomycosis.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제34권2호
• /
• pp.119-130
• /
• 2008

Absorbable atelo-collagen sponge $TERUPLUG^{(R)}$, Termo Co. Tokyo, Japan) is inserted in the extraction wound where alveolar bone is exposed. It protects wounds and promotes the formation of granulation. This is made of atelo-collagen, to minimize antigenicity, which is cross-linked by heat treatment for biocompatibility. $TERUPLUG^{(R)}$ consists of between 85 and 95 % of collagen type I and between 5 to 15 % of collagen type III. The raw material for the collagen is derived from bovine skin. It features a sponge block design and is shaped for easy insertion in the extraction wound. This study was designed to find out the bone healing capacity of $TERUPLUG^{(R)}$. We implanted $TERUPLUG^{(R)}$ (experimental group I) and $TERUPLUG^{(R)}$ with rhBMP-2 (experimental group II) in the rabbit cranium defect and then histologically analysed the specimen. The results were as follows. 1. In the 4 weeks, a lot of the newly formed collagen fibers around material of the experimental group I implanted $TERUPLUG^{(R)}$ were observed. But, in the experimental group II implanted $TERUPLUG^{(R)}$ with rhBMP-2, a little of newly formed collagen fibers around material were observed. The cell proliferating activity and apoptosis of the experimental group I, II was positive in and around the implanted material. 2. In the 8 weeks, the amount of newly formed and matured bone in the experimental group II was more observed than the experimental group I and control group. The results of this study indicate that absorbable atelo-collagen sponge ($TERUPLUG^{(R)}$) is relatively favorable bone void filler with biocompatibility and has the better bone healing capacity in case of application with rhBMP-2.

• Journal of Korean Neurosurgical Society
• /
• 제60권2호
• /
• pp.225-231
• /
• 2017

Objective : Solid bone fusion is an essential process in spinal stabilization surgery. Recently, as several minimally invasive spinal surgeries have developed, a need of artificial bone substitutes such as demineralized bone matrix (DBM), has arisen. We investigated the in vivo bone growth rate of DBM as a bone void filler compared to a local autologous bone grafts. Methods : From April 2014 to August 2015, 20 patients with a one or two-level spinal stenosis were included. A posterior lumbar interbody fusion using two cages and pedicle screw fixation was performed for every patient, and each cage was packed with autologous local bone and DBM. Clinical outcomes were assessed using the Numeric Rating Scale (NRS) of leg pain and back pain and the Korean Oswestry Disability Index (K-ODI). Clinical outcome parameters and range of motion (ROM) of the operated level were collected preoperatively and at 3 months, 6 months, and 1 year postoperatively. Computed tomography was performed 1 year after fusion surgery and bone growth of the autologous bone grafts and DBM were analyzed by ImageJ software. Results : Eighteen patients completed 1 year of follow-up, including 10 men and 8 women, and the mean age was 56.4 (32-71). The operated level ranged from L3/4 to L5/S1. Eleven patients had single level and 7 patients had two-level repairs. The mean back pain NRS improved from 4.61 to 2.78 (p=0.003) and the leg pain NRS improved from 6.89 to 2.39 (p<0.001). The mean K-ODI score also improved from 27.33 to 13.83 (p<0.001). The ROM decreased below 2.0 degrees at the 3-month assessment, and remained less than 2 degrees through the 1 year postoperative assessment. Every local autologous bone graft and DBM packed cage showed bone bridge formation. On the quantitative analysis of bone growth, the autologous bone grafts showed significantly higher bone growth compared to DBM on both coronal and sagittal images (p<0.001 and p=0.028, respectively). Osteoporotic patients showed less bone growth on sagittal images. Conclusion : Though DBM alone can induce favorable bone bridging in lumbar interbody fusion, it is still inferior to autologous bone grafts. Therefore, DBM is recommended as a bone graft extender rather than bone void filler, particularly in patients with osteoporosis.

• Journal of the Korean Wood Science and Technology
• /
• 제43권4호
• /
• pp.528-537
• /
• 2015

폐기물의 재활용을 도모하기 위해 음식점이나 정육점에서 폐기되는 뼈(골분)를 합판용 접착제의 충전제로서 이용 가능성을 검토하였다. 현재 업계에서 합판의 제조에 사용되고 있는 3종의 접착제(UMF, UF 및 PF수지)에 대해 3종의 골분(소골분, 돼지골분 및 조개골분)을 첨가하여 제조한 라티에타파인 합판의 접착성능을 기존의 소맥분과 비교하였다. 3수지에서 모두 소맥분을 전부 소골분, 돼지골분 및 조개골분으로 각각 대체한 합판의 접착성능은 상태나 습윤 강도 및 목파율 모두 소맥분 첨가 합판보다 낮았다. 따라서 소맥분을 전혀 첨가하지 않고 골분으로 모두 대체하는 것은 곤란하였다. 그러나, 소맥분의 절반을 소골분과 돼지골분으로 각각 대체하여 제조한 합판의 성능은 소맥분을 사용한 합판과 거의 동등하거나 오히려 우수한 내수성능을 발휘하여 소맥분과 병용해서 사용하면 충분히 이용이 가능할 것으로 생각된다. 소맥분과 병용한 경우, 3종의 골분 중에는 조개골분을 첨가하여 제조한 합판 보다는 소골분과 돼지골분을 첨가한 합판의 성능이 우수하였으며, 소골분과 돼지골분 간에는 큰 차이가 없었다.

• Archives of Plastic Surgery
• /
• 제45권3호
• /
• pp.214-221
• /
• 2018

Clarification is needed regarding the definitions and classification of groove and hollowness of the infraorbital region depending on the cause, anatomical characteristics, and appearance. Grooves in the infraorbital region can be classified as nasojugal grooves (or folds), tear trough deformities, and palpebromalar grooves; these can be differentiated based on anatomical characteristics. They are caused by the herniation of intraorbital fat, atrophy of the skin and subcutaneous fat, contraction of the orbital part of the orbicularis oculi muscle or squinting, and malar bone resorption. Safe and successful treatment requires an optimal choice of filler and treatment method. The choice between a cannula and needle depends on various factors; a needle is better for injections into a subdermal area in a relatively safe plane, while a cannula is recommended for avoiding vascular compromise when injecting filler into a deep fat layer and releasing fibrotic ligamentous structures. The injection of a soft-tissue filler into the subcutaneous fat tissue is recommended for treating mild indentations around the orbital rim and nasojugal region. Reducing the tethering effect of ligamentous structures by undermining using a cannula prior to the filler injection is recommended for treating relatively deep and fine indentations. The treatment of mild prolapse of the intraorbital septal fat or broad flattening of the infraorbital region can be improved by restoring the volume deficiency using a relatively firm filler.

• Journal of Periodontal and Implant Science
• /
• 제35권2호
• /
• pp.491-510
• /
• 2005

This study was performed to evaluate the effect of inorganic polyphosphate on bone formation in the calvaria of rabbit in the procedure of guided bone regeneration with bovine cancellous bone graft and titanium reinforced expanded polytetrafluoroethylene(TR-ePTFE) membrane. The rabbits were divided into four groups. Control group I used only TR-ePTFE membrane, control group II used TR-ePTFE membrane and deproteinized bovine bone mineral soaked in saline, experimental group III and IV used TR-ePTFE membrane and deproteinized bovine bone mineral soaked in 1% or 2% inorganic polyphosphate respectively. After decortication in the calvaria, GBR procedure was performed on 12 rabbits with titanium reinforced ePTFE membrane filled with deproteinized bovine bone mineral soaked in saline or inorganic polyphosphate. The animals were sacrificed at 2 weeks, 4 weeks, and 8 weeks after the surgery. Decalcified and non-decalcified specimens were processed for histologic and immunohistochemistric analysis. 1. Titanium reinforced ePTFE(TR-ePTFE) membrane showed good spacemaking and cell occlusiveness capability, but it showed poor wound stabilization. 2. The deproteinized bovine bone mineral did not promote bone regeneration, but it acted as a space filler. 3. There was no complete resorption of the deproteinized bovine bone mineral within 8 weeks. 4. 1% inorganic polyphosphate did not promote bone formation, but 2% inorganic polyphosphate promoted bone formation. Within the above results, 2% inorganic polyphosphate could be used effectively for bone regeneration.

• 폴리머
• /
• 제31권2호
• /
• pp.141-147
• /
• 2007

치아 수복용 충전제로서 인체 뼈의 주성분인 수산화인회석(hydroxyapatite)이 혼성화된 바륨실리케이트 (barium silicate, BaSi)를 사용하여 제조한 고분자 복합체의 치과적 물성을 분석하였다. 복합체 제조에 사용된 아크릴계 기재는 가시광선을 사용하여 경화시켰다. 실험 결과, 혼성화된 충전제 내에서의 BaSi 함량이 증가할수록 복합체의 기계적 강도는 일정하게 증가하였으며 치의학에서 규정한 값들을 상회하여 치아 수복재료로 충분한 값임을 확인할 수 있었다. 그러나 충전제 내에서의 BaSi 함량 증가에 따른 복합체의 내마모도는 약간 감소하였다. 한편, 복합체의 중합깊이는 충전제의 구성비에 관계없이 $6\sim9mm$ 정도로서 일반적 치과용 수복재료로 충분한 값들임을 확인하였으며 중합전환율과 중합수축률은 충전제 구성비에의 직접적 의존 경향성은 거의 없음을 확인할 수 있었다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제36권1호
• /
• pp.39-42
• /
• 2010

Maxillary sinus lift and bone graft are used to reconstruct atrophic maxilla molar area for endosseous dental implants. Many different grafting materials and techniques can be used for maxillary sinus bone graft. Bio-$Oss^{(R)}$ has been proposed as bone substitute and successfully utilized as osteoconductive filler. Platelet rich plasma (PRP) is an autologous material with many growth factors, such as PDGF, TGF-$\beta$, IGF, VEGF, facilitating bone healing process. And Platelet poor plasma (PPP) is the by-product in procedure of producing PRP. Six rabbits were used as experimental animal. Both maxillary sinus were grafted with Bio-$Oss^{(R)}$ and PRP, and Bio-$Oss^{(R)}$ and PPP. Rabbits were sacrificed at 4, 8 and 12 weeks. The grafting sites were evaluated by histomorphometric analysis. As a result, using PRP showed excellent bone formation in the early stage, but no further significant effect after that. In late stage, the ability of bone formation of using PRP was even worse than using PPP. The further studies need to be considered in this case.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제32권4호
• /
• pp.344-350
• /
• 2010

A progressive hemifacial atrophy is characterized by progressive atrophy of subcutaneous fat and rarely muscle and bone. Its contour follows the underlying muscle. Unilateral involvement is common. The treatment goal has been focused on the augmentation of the soft tissue. Many materials such as implants, collagen, fat graft, fat injection, dermal fat graft, filler and vascualized autogenous graft have been used. Although these materials have been used, the best treatment hasn't been achived. In severe cases underlying soft tissue, muscle and bone may be atrophied and massive soft tissue graft, implant and orthognathic surgery must be used. The author used the dermal-fat tissue for the pupose of soft tissue augmentation. We can get the massive soft tissue by the dermolipectomy procedure through the mini-abdominoplsty. The facial augmentation was done by augmentation of the dermal-fat tissue. The progressive hemifacial atrophy is hard to treat by only one procedure and many modalites must be considered.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제27권3호
• /
• pp.238-247
• /
• 2005

The placement of different graft materials and/or the use of occlusive membranes to cover the extraction socket entrance are techniques aimed at reducing alveolar ridge resorption and enhancing bone formation. However, in spite of its clinical advantage, the use of graft materials in fresh extraction socket has been questioned because particles of the grafted material have been found in alveolar sockets with fibrous union. The purposes of this study were to evaluate whether alveolar ridge resorption following tooth extraction could be reduced and bone formation could be enhanced by the application of absorbable gelatin spongy or gelatin spongy soaked with platelet rich plasma(PRP) used as a space filler in clinical and radiographic aspects. Eighty patients who were scheduled for extraction of both third molars were participated and carried out by one experienced surgeon. Following extraction of teeth, one extracted socket were treated with gelatin spongy as an experimental group A and the other were treated with gelatin spongy and PRP as an experimental group B. The routine extracted socket were healed without any treatment as a control group. From the period of extraction to 12 weeks postoperatively, we examined the clinical course and radiographic evaluation on socket at regular interval. Both experimental groups showed faster wound healing process than control clinically. Vertical gingival height of the extraction socket were less changed statistically in both experimental groups than control. The horizontal width change of the extraction socket were not significant statistically in any group. Radiographic changes of the alveolar bone height were less changed in both experimental groups and bone density were showed higher than control. There were a little difference between experimental group A and B. In conclusion, absorbable gelatin sponge and with PRP were considered as having preservation effects of extraction socket and stimulation of bone formation process after extraction.