• Journal of Information Technology Applications and Management
• /
• 제29권4호
• /
• pp.35-49
• /
• 2022

Knowledge sharing occurs through voluntary interactions between human actors. In this paper, from the perspective of social interaction, the effect of transactive memory capability and social capital (bridging social capital and bonding social capital) on knowledge sharing intention was analyzed, and tenure was demonstrated as a moderating factor that can strengthen their relationship. Therefore, the results of this study are summarized as follows. First, it was verified that the transactive memory capability had a significant positive effect on the knowledge sharing intention. Second, it was found that the bridging social capital and bonding social capital held by individuals had a significant positive effect on knowledge sharing intention. Social capital is understood to form an individual's voluntary motivation for knowledge sharing. Third, it was verified that the moderating effect of tenure suggested in this study was not significant. Based on the results of this study, implications and future research directions were presented.

• 한국산학기술학회논문지
• /
• 제18권4호
• /
• pp.175-182
• /
• 2017

본 와이어 본딩은 발광 다이오드의 패키징 공정에서 매우 중요한 공정으로 금 와이어를 이용하여 발광 다이오드 칩과 리드 프레임을 연결함으로써 다음 공정에서의 전기적 작동을 가능하게 한다. 와이어 본딩 공정은 얇은 금속선을 연결하는 공정으로 열 압착 본딩(thermo compression bonding)과 초음파 본딩(ultra sonic bonding)이 있다. 일반적인 와이어 본딩 공정은 LED 칩 상부 전극 부위에 볼 모양의 본딩을 진행하는 1st ball bonding 공정, loop를 형성하여 다른 전원 연결부위로 wire를 늘어뜨리는 looping 공정, 다른 전극 부위 상부에 stitch를 형성하여 bonding 하는 2nd stitch bonding으로 구분된다. 본 논문에서는 발광 다이오드 다이 본딩 공정에 영향을 주는 다양한 공정 변수에 대하여 분석을 수행하였다. 그리고 반응 표면 분석법을 통하여 Zener 다이오드 칩과 PLCC 발광 다이오드 패키지 프레임을 연결하는 공정 최적화 결과를 도출하였다. 실험 계획법은 5인자, 3수준에 대하여 설정하였으며 4가지 반응에 대하여 인자를 분석하였다. 결과적으로 본 연구에서는 모든 목표에 맞는 최적 조건을 도출하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.349-352
• /
• 1988

In this study, a structured supervisory control for automatic assembly system is developed. And also diagnosis and fault-recovery capability of this supervisory control are discussed. This structured supervisory control is actually applied to Die Bonding Machine and is proved to be useful and to work well.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.411-414
• /
• 1998

In this paper, the silicon-nitride membrane structure for IR sensor was fabricated through the etching and the direct bonding. The PT layer as a IR detection layer was deposited on the membrane and its characteristics were measured. The attack of PT layer during the etching of silicon wafer as well as the thermal isolation of the IR detection layer can be solved through the method of bonding/etching of silicon wafer. Because the PT layer of c-axial orientation rained thermal polarization without polling, the more integration capability can be achieved. The surface roughness of the membrane was measured by AFM, the micro voids and the non-contacted area were inspected by IR detector, and the bonding interface was observed by SEM. The polarization characteristics and the dielectric characteristics of the PT layer were measured, too.

• ETRI Journal
• /
• 제37권5호
• /
• pp.951-960
• /
• 2015

For a conventional power metal-oxide-semiconductor field-effect transistor (MOSFET), there is a trade-off between specific on-state resistance and breakdown voltage. To overcome this trade-off, a super-junction trench MOSFET (TMOSFET) structure is suggested; within this structure, the ability to sense the temperature distribution of the TMOSFET is very important since heat is generated in the junction area, thus affecting its reliability. Generally, there are two types of temperature-sensing structures-diode and resistive. In this paper, a diode-type temperature-sensing structure for a TMOSFET is designed for a brushless direct current motor with on-resistance of $96m{\Omega}{\cdot}mm^2$. The temperature distribution for an ultra-low on-resistance power MOSFET has been analyzed for various bonding schemes. The multi-bonding and stripe bonding cases show a maximum temperature that is lower than that for the single-bonding case. It is shown that the metal resistance at the source area is non-negligible and should therefore be considered depending on the application for current driving capability.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 춘계학술발표대회 논문집
• /
• pp.149-153
• /
• 2000

Substituting composite structures for conventional metallic structures has many advantages because of higher specific stiffness and specific strength of composite materials. In this work, one-piece propeller shafts composed of carbonfepoxy and glass/epoxy composites were designed and manufactured for a rear wheel drive automobile satisfying three design specifications, such as static torque transmission capability, torsional buckling and the fundamental natural bending frequency. Single lap adhesively bonded joint was employed to join the composite shaft and the aluminum yoke. For the optimal adhesive joining of the composite propeller shaft to the aluminum yoke, the torque transmission capability of the adhesively bonded composite shaft was calculated with respect to bonding length and yoke thickness by finite element method and compared with the experimental result. Then an optimal design method was proposed based on the failure model which incorporated the nonlinear mechanical behavior of aluminum yoke and epoxy adhesive. From the experiments and FEM analyses, it was found that the static torque transmission capability of composite propeller shaft was maximum at the critical yoke thickness, and it saturated beyond the critical length. Also, it was found that the one-piece composite propeller shaft had 40% weight saving effect compared with a two-piece steel propeller shaft.

• 한국산학기술학회논문지
• /
• 제13권10호
• /
• pp.4378-4384
• /
• 2012

LED 칩 패키징에서 다이 본딩은 웨이퍼에서 분할된 다이를 리드 프레임에 접착제로 고정시켜 칩이 다음 공정을 견딜 수 있는 충분한 강도를 제공하는 중요한 공정이다. 본 논문에서는 PLCC 구조 LED 패키지 프레임에 소형 제너 다이오드를 부착하는 다이 본딩 공정능력의 최적화를 위하여 공정에 영향을 미치는 여러 인자를 분석하여 반응표면분석법을 적용하여 그 결과를 도출하였다. 인자를 분석하여 5인자 3수준 4반응치를 고려하여 실험계획법을 수립하였으며, 그 결과 모든 반응치의 목표를 만족하는 최적 조건을 확보할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 G
• /
• pp.2501-2503
• /
• 1998

In this paper, the silicon-nitride membrane structure for IR sensor was fabricated through the etching and the direct bonding. The PTO layer as a IR detection layer was deposited on the membrane and its characteristics were measured. The attack of PTO layer during the etching of silicon wafer as well as the thermal isolation of the IR detection layer can be solved through the method of bonding/etching of silicon wafer. Because the PTO layer of c-axial orientation raised thermal polarization without polling, the more integration capability can be achieved. The surface roughness of the membrane was measured by AFM, the micro voids and the non-contacted area were inspected by IR detector, and the bonding interface was observed by SEM. The polarization characteristics and the dielectric characteristics of the PTO layer were measured, too.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.81-84
• /
• 1995

A reliable bonding between two silicon wafers, regularly grooved and non-grooved, was done by the direct boning technology, It is Presented that high structural duality was realized not only at the bended interface but in the bulk, commensurate with the filling of artificial grooves, which would be attributed to the dislocation-gettering capability of groove free-surfaces during annealing. The groove filling would be explained with mass-transport phenomena assisted by the dislocation movement from initial contact boundaries toward groove surfaces. Intrinsic voids can be easily removed by aid of the grooves. The proposed method yielded also an intimate bonding not only between {111} wafers strongly misoriented and slightly inclined to {111} basal plane but even between {111} and {100} orientation wafers.

• 마케팅과학연구
• /
• 제19권2호
• /
• pp.40-52
• /
• 2009

Franchising is one of the fastest growing types of business. It is already popular and well-known in the U.S., and has been growing in many other countries including Korea. Furthermore, many Korean franchising companies have expanded their business overseas actively. According to the data by the Ministry of Industry and Resource, 82 companies out of a sample of 500 franchising companies are already operating in many foreign countries and 48% of them have started their foreign business since 2006. This clearly indicates the fast growing current trend of foreign operation by Korean franchising companies. In spite of the fast growing trend of foreign expansion in the industry, academic research on internationalization of franchising companies is extremely difficult to find. Accordingly, academic research on the issue is necessary and urgent in Korea. Among the various research questions on internationalization of franchising business, this study intends to investigate the difference in organizational factors between the franchising companies doing foreign operation and those doing business only domestically. More specifically, this research has the following purposes. First, considering the lack of theoretical basis of previous studies, resource-based theory and agency theory are employed as the theoretical bases. Second, this study explains the difference in internationalization based on organizational factors such as company size, history and growth rate. Third, the five hypotheses regarding the difference in organizational factors are presented and tested empirically, which is the first attempt in the area of this topic. Finally, the study attempts to clarify the conflicting implications among theories regarding some organizational factos such as growth rate. As the theoretical background, resource-based theory and agency theory are discussed. According to resource-based theory, a firm can grow continuously when it has competence and resource, and also the ability to develop them. The competence and resource can include capital, human resource, management skill, market information, ability to manage risk, etc. Meanwhile, agency theory views the relationship between franchisor and franchisee as an agency relationship. In agency theory, bonding capability and monitoring capability are the two key factors which promote internationalization of franchising companies. Based on the two theories, a conceptual model is designed. The model consists of two groups of variables. One is organizational factors including size, history, growth rate, price bonding and geographic dispersion. The other is whether a franchising company is operating overseas or not. We developed the following five research hypotheses basically describing the relationship between organizational factors and internationalization of franchising companies. H1: The size of franchising companies operating overseas is larger than that of franchising companies operating domestically. H2: The history of franchising companies operating overseas is longer than that of franchising companies operating domestically. H3: The growth rate of franchising companies operating overseas is higher than that of franchising companies operating domestically. H4: The price bonding of franchising companies operating overseas is higher than that of franchising companies operating domestically. H5: The geographic dispersion of franchising companies operating overseas is wider than that of franchising companies operating domestically. Data for the analyses are obtained from 2005 Korea Franchise Survey data co-generated by Ministry of Industry and Resource, GS1 Korea, and Korea Franchise Association. Out of 2,804 population companies, 2,489 companies are excluded for various reasons and 315 companies are selected as the final sample. Prior to hypotheses tests, validity and reliability of the measures of size, history, growth rate and price bonding are examined for further analyses. Geographic dispersion is not validated since it is measured using nominal data. A series of independent sample T-tests is used to find out whether there exists any significant difference between the companies internationalized and those operating only domestically for each organizational factor. Among the five factors, size and geographic dispersion show significant difference, growth rate and price bonding do not reveal any difference and, finally, history factor shows conflicting results in the difference depending on how to measure it.