The aim of this study was to evaluate the marginal adaptation of direct class II sandwich restoration with packable composites(P-60), resin modified glass ionomer cement(Fuji-II LC), flowable compomer(Dyract Flow), flowable composites(Filtek Flow) in comparison with total bond restorations. In addition, for sandwich restorations, influence of different sandwich techniques was also evaluated. Large butt-joint box typed class II cavites with cervical margins 1mm below the cemento-enamel junction were cut into 70 extracted human molars. The cavities(7 groups, n=10) were filled using a closed/open sandwich restoration or total bond restoration technique with materials according to the manufacturer's recommandation using the single-component bonding agent for each system. Teeth were thermocycled 500 times between 5$^{\circ}C$ and 55$^{\circ}C$ with 30-second dwell time. The teeth were then coated with nail polish 1mm short of the restoration, placed in a 2% methylene blue for 24 hours, and sectioned with diamond wheel. Sections were examined with a stereoscope to determine the extent of microleakage. Dentine /Cementum margins were analyzed for microleakage on scale of 0(no leakage) to 4(entire axial wall) and interface between materials, on scale of 0(no leakage) to 3(axial wall). Results were evaluated with Kruskal Wallis Test, corrected for ties, to determine whether there were statistically significant differences among the seven groups. Pairs of groups were analyzed using the Student-Newman-Keuls Method and Dunn s Method. The results were as follows : 1. All groups showed some micoleakage in cervical portion. But there were no microleakage in interface between materials. 2. Closed sandwich restorations with Fuji-II LC and Filtek Flow had significantly lower leakage rating than total restorations with only P-60. However, open sandwich restorations with Dyract Flow showed significantly higher (P<0.05) 3. Closed sandwich restorations had significantly lower leakage rating than total restorations. However open sandwich restoration s showed significantly higher (P<0.05). 4. Sandwich restorations with Fuji-II LC were iou$.$or leakage than only P-60. Filtek Flow, Dyract Flow. But there were no statistically differences among the materials. From the results above, it could be concluded, closed sandwich restorations was effective in reducing microleakage of class II restorations. The best results showing the least microleakage were for the closed sandwich technique with Fuji-II LC and Filtek Flow.
트립탄 계열의 약물을 경구 복용 시에 트립탄은 소화 시스템에 의하여 생물학적 이용도가 감소되며, 혈중 약물 농도가 시간의 경과에 따라 급격히 감소되고, 위장 장애의 가능성 등이 있다는 문제들을 나타낸다. 일반 겔 패치의 부작용을 개선하기 위하여 패치는 하이드로겔 형태로 제조하였다. 하이드로겔 패치의 주가 되는 메트릭스의 고분자는 PVA를 사용하였고, PEG는 PVA의 분자 간/분자 내 수소결합을 유도하기 위해 첨가물로서 사용되었고 알모트립탄 약물이 부가되었다. 또한 PVA 체인간의 미세 상분리를 가속하기 위해 매우 낮은 온도에서 액체질소가 사용되었다. FT-IR 분석에서 PVA, PEG 그리고 알모트립탄의 흡수 밴드를 확인하였다. PEG 함량이 증가함에 따라 결정화도, 수분흡수력과 인장강도들은 증가하였다. 약물방출 실험에서 약물 방출량은 PEG의 함량이 높은 하이드로겔이 약물 방출 시에 팽윤이 더 잘 이루어져 증가하였다. 본 실험에서 10 wt%의 PEG를 첨가하여 제조된 하이드로겔의 약물 방출량이 가장 좋았다. 또한 10 wt%의 PEG가 함유된 하이드로겔은 2시간째까지 전체 약물의 약 60%가 방출됨을 확인하였고, 24시간째까지도 방출이 계속되었다. 따라서 제조된 하이드로겔은 triptan의 1차 투여 이후 24시간 이내에 재발하는 편두통 환자들을 대상으로 한 트립탄의 2차 투여를 위한 경피흡수형 패치로서 적합하다.
생강나무 목부를 80% methanol로 추출, 농축하였으며, 얻어진 추출물을 ethyl acetate (EtOAc), butanol (n-BuOH) 및 $H_2O$로 분배, 추출하였다. 이 중 EtOAc 분획과 n-BuOH 분획에 대하여 silica gel, octadecyl silica gel (ODS) 및 Sephadex LH-20 column chromatography를 반복 수행하여 2종의 lignan과 3종의 flavonoid 화합물을 분리하였다. 분리한 화합물의 구조는 NMR, MS 및 IR 등의 스펙트럼 데이터를 해석하여 asarinin (1), (+)-catechin (2), (-)-epicatechin (3), hyperin (4) 및 nudiposide (5)로 구조 동정하였다. Asarinin (1)과 nudiposide (5)는 생강나무에서 이번에 처음으로 분리되었다.
현대인들은 실내에서 보내는 시간이 하루 중 90% 달하는 것을 간주할 때 실내의 공기는 현대에게 중요한 요소임을 알 수 있다. 1960년대 이후로 산업이 급격히 발전하면서 건축 재료는 천연재료에서 화학물질을 기본으로 하는 재료로 변하게 되고 에너지 절약의 대책으로 건물의 기밀도를 높임으로써 건축자재에서 발생하는 유해물질이 현대인에게 악영향을 미치기 시작했고 이런 요소들이 근원이 되어 새집증후군을 유발하게 되었다. 생활수준이 높아지면서 사람들은 건강에 대한 관심도 높아지게 되고 보다 유익한 친환경 건축자재를 요구하게 되었다. 본 연구에서는 황토, 물, 수지, 경화제, 무기물 충전제를 이용한 친환경 황토 마감재를 개발하였고 한국형 목조 주택 내장벽에 사용할 수 있는 최적의 비율을 연구하였다. 그리고 이런 황토 마감재가 실내벽에 사용 시 요구물성인 내잔갈림성, 내세척성, 내충격성, 부착강도를 측정하였고 황토마감재의 특성인 원적외선 실험과 포름알데히드, TVOC 방산 농도를 통하여 친환경성에 대한 평가를 하였다.
Most of the materials used in various industrial fields and also in our daily life are multi-component materials or composite materials, and it is well known that there are many cases where adhesion between the constituents within the bonded systems plays an important role. There are various types of performance evaluation tests for the bonded materials, among which tests for evaluating the bond performance under various conditions may be regarded as the most interesting ones for those engaged in work related to adhesion. I have studied on the mechanism of adhesion form the rheological standpoint with my colleagues, including some students from Korea, and I am very happy to be able to have a talk on some of our research works. In Japan, the so-called "adhesives" are usually classified into two categories;adhesives and pressure sensitive adhesives (PSA). Adhesives are the materials which solidify after bonding and are after used as the structural adhesives because the adhesive strength is comparatively strong. On the other hand, the pressure sensitive adhesives never solidify and are used as PSA tapes, labels or decals. About the adhesives, we have examined the dependence of adhesive strength(shear, tensile, peel) upon both temperature and rate of deformation, and found out some empirical rules which are applicable to most of the adhesive systems. We have also developed a simplified theory of adhesion, which is deseribed in terms of mechanical equivalent mode1 and a few failure criteria. Although some of the common rules can be accounted for according to this theory, it must be pointed out that a fracture mechanical approach ms inevitable especially in the region where the meehanical relaxation time of the adhesive is extremely large [W. W. Lim and H. Mizumachi]. About the pressure sensitive adhesives, we have studied on the PSA performance (peel, tack, holding power) as a function of both the viscoelastic properties and surface chemical properties of the materials, and found out some rules, and again we have developed a theory which deseribes the mechanism. And in addition, we have studied on the miscibility between linear polymers and oligomers, because PSA is generally manufactured by blending gums and tackifier resins. Many phase diagrams have been found and some of them have been analyzed on thermodynamic basis, and it became evident that the miscibility is a very important factor in PSA [H. J. Kin and H. Mizumachi]. In this presentation, I want to emphasize the fact that the adhesion performance is closely related to the structure/property of the adhesives.adhesives.
본 연구에서는 벤토나이트로 굴착 트렌치의 안정성을 유지하면서 시멘트와 벤토나이트 혼합물을 불투수벽체의 재료로 사용하여 지중차수벽체를 구성하는 새로운 시공방법에 대해 고찰하였다. 강화벤토나이트 차수벽체공법은 굴착된 구역을 균질하게 차수재료로 치환하므로 일반적인 그라우팅공법에 비해 차수효과의 예측과 시공성과의 검증이 보다 용이한 장점을 지닌다. 또한 강화벤토나이트 차수벽체공법은 시공 장비가 단순하고 시공 순서가 간단하므로 경제적인 측면에서도 큰 장점을 가지고 있다. 본 연구에서는 다양한 실내실험을 통해 배합재료와 배합방법의 변화에 따른 강화벤토나이트 차수벽체의 공학적 특성을 고찰하였으며, 본 공법의 실무 적용 시 시공비용 결정과 벽체의 설계를 위해 가장 중요한 표준 배합비와 배합방법을 제시하였다. 마지막으로 차수벽체를 구성하는 재료들의 결합재로 사용되는 일반포틀랜드 시멘트와 고로슬레그 시멘트의 효과를 비교하였다.
Two-step or one-step bonding systems generally inhibit curing process of dual-cured core build-up resin composite for their adhesive acidity. In addition this dual-cured core build-up resin composite can be applied to dentin of pulp chamber and root at the time that complete the endodontic treatment. The purpose of this investigation was to determine the influence of sodium hypochlorite on rnicrotensile bond strength of dual-cured core build-up resin composite. Extracted human molars were horizontally sectioned with 1mm thickness using low speed diamond saw. After the sectioned specimens were divided into 8 groups, adhesive systems (Clearfil SE-Bond, Prime&Bond NT[2-step, 1-step], Adper Prompt L-Pop) were then applied with or without sodium hypochlorite pretreatment. The treated specimen was filled with dual-cured core build-up resin composite (Luxacore, DMG corp., German). Then light cured for 40 seconds and soaked in $37^{\circ}C$ water bath for 24 hours. After the treated specimen was grinded with 1mm width and measured rnicrotensile bond strength by testing machine. Additionally 8 teeth were prepared for SEM evaluation. The results were as follows. : NaOCl treated groups generally had lower rnicrotensile bond strength but did not show any difference statistically except Adper Prompt L-Pop. When the teeth were treated by NaOCl, though the difference of applied adhesive system, it had no statistically significant difference within the NaOCl treated groups except the relation of between ClearFil SE-Bond adhesive system and Adper Prompt L-Pop adhesive system. In the SEM evaluation, NaOCl treated groups presented relatively long resin tags and incomplete hybrid layer formation generally.
3차원 적층 패키지를 위한 Cu/Sn-3.5Ag 미세범프의 솔더 구조에 따른 금속간화합물 성장거동을 분석하기 위해 솔더 두께가 각각 $6{\mu}m$, $4{\mu}m$인 서로 다른 구조의 미세범프를 $130^{\circ}C$, $150^{\circ}C$, $170^{\circ}C$ 조건에서 실시간 주사전자현미경을 이용하여 실시간 금속간화합물 성장 거동을 분석하였다. Cu/Sn-3.5Ag($6{\mu}m$) 미세범프의 경우, 많은 양의 솔더로 인해 접합 직후 솔더가 넓게 퍼진 형상을 나타내었고, 열처리 시간경과에 따라 $Cu_6Sn_5$ 및 $Cu_3Sn$금속간화합물이 성장한 후, 잔류 Sn 소모 시점 이후 $Cu_6Sn_5$가 $Cu_3Sn$으로 상전이 되는 구간이 존재하였다. 반면, Cu/Sn-3.5Ag($4{\mu}m$) 미세범프의 경우, 적은양의 솔더로 인해 접합 직후 솔더의 퍼짐 현상이 억제 되었고, 접합 직후 잔류 Sn상이 존재하지 않아서 금속간화합물 성장구간이 억제되고, 열처리 시간경과에 따라 $Cu_6Sn_5$가 $Cu_3Sn$으로 상전이 되는 구간만 존재하였다. 두 시편의 $Cu_3Sn$상의 활성화 에너지의 값은 Cu/Sn-3.5Ag($6{\mu}m$) 및 Cu/Sn-3.5Ag($4{\mu}m$) 미세범프가 각각 0.80eV, 0.71eV로 나타났고, 이러한 차이는 반응기구 구간의 차이에 따른 것으로 판단된다. 따라서, 솔더의 측면 퍼짐 보다는 접합 두께가 미세범프의 금속간화합물 반응 기구를 지배하는 것으로 판단된다.
STATEMENT OF PROBLEM. Macroscopic and especially microscopic properties of implant surfaces play a major role in the osseous healing of dental implants. Dental implants with modified surfaces have shown stronger osseointegration than implants which are only turned (machined). Advanced surface modification techniques such as anodic oxidation and Ca-P application have been developed to achieve faster and stronger bonding between the host bone and the implant. PURPOSE. The purpose of this study was to investigate the effect of surface treatment of titanium dental implant on implant stability after insertion using the rabbit tibia model. MATERIAL AND METHODS. Three test groups were prepared: sandblasted, large-grit and acid-etched (SLA) implants, anodic oxidized implants, and anodized implants with Ca-P immersion. The turned implants served as control. Twenty rabbits received 80 implants in the tibia. Resonance frequencies were measured at the time of implant insertion, 2 weeks and 4 weeks of healing. Removal torque values (RTV) were measured 2 and 4 weeks after insertion. RESULTS. The implant stability quotient (ISQ) values of implants for resonance frequency analysis (RFA) increased significantly (P <. 05) during 2 weeks of healing period although there were no significant differences among the test and control groups (P >. 05). The test and control implants also showed significantly higher ISQ values during 4 weeks of healing period (P < .05). No significant differences, however, were found among all the groups. All the groups showed no significant differences in ISQ values between 2 and 4 weeks after implant insertion (P >. 05). The SLA, anodized and Ca-P immersed implants showed higher RTVs at 2 and 4 weeks of healing than the machined one (P < .05). However, there was no significant difference among the experimental groups. CONCLUSION. The surface-modified implants appear to provide superior implant stability to the turned one. Under the limitation of this study, however, we suggest that neither anodic oxidation nor Ca-P immersion techniques have any advantage over the conventional SLA technique with respect to implant stability.
Metal organic frameworks (MOF)과 유사하게 금속과 유기물로 이루어진 골격 물질 중 제올라이 트와 유사한 구조를 갖는 zeolitic imidazolate framework (ZIF)를 처음으로 마이크로파(MW)를 이용하여 합성하였다. ZIF 중 잘 알려진 ZIF-8을 전통적인 전기 가열(CE)과 마이크로파 조사로 합성하였으며 ZIF-8은 $140{\sim}180^{\circ}C}$의 범위에서 용이하게 얻을 수 있었다. MW 합성에 의해 ZIF-8을 신속 하게 합성할 수 있었으며 결정 크기는 전통적인 합성에 비해 전반적으로 감소하였다. $140{^{\circ}C}$에서의 합성 결과 전통 적인 합성에 비해 MW에 의해 약 5배의 반응 속도가 증가함을 알 수 있었고 4시간 이내에 합성 반응이 종료됨을 알 수 있었다. MW로 얻어진 ZIF-8은 CE에 의한 ZIF-8에 비해 증가된 표면적과 세공부피를 가 졌다. 얻어진 모든 ZIF-8은 질소 흡착 실험 결과 type-I 흡착 등온선을 보였고 미세 세공을 가짐을 알 수 있었다. FTIR 및 TGA 결과 두 방법으로 얻어진 ZIF-8은 서로 유사한 결합 및 열적 특성을 보였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.