• 제목/요약/키워드: Bond characteristic

검색결과 175건 처리시간 0.028초

선택성장영역 크기에 따른 InGaN/GaN 다중양자우물 청색 MOCVD-발광다이오드 소자의 특성 (The characteristic of InGaN/GaN MQW LED by different diameter in selective area growth method)

  • 배선민;전헌수;이강석;정세교;윤위일;김경화;양민;이삼녕;안형수;김석환;유영문;하홍주
    • 한국결정성장학회지
    • /
    • 제22권1호
    • /
    • pp.5-10
    • /
    • 2012
  • 일반적으로 mesa 구조의 발광다이오드 제작은 MOCVD법으로 수행되고 있다. 특히 개개의 발광다이오드 칩을 식각하고 분리하기 위해서 발광다이오드는 반응성이온식각(RIE)공정과 절단(scribing) 공정을 거치게 된다. 플라즈마를 이용한 건식식각공정인 RIE 공정은 결함, 전위, 표면의 댕글링 본드 형성과 같은 몇 가지 문제점을 유발하고, 이러한 이유로 인해 소자 특성을 저하시킨다. 선택영역성장법은 사파이어 기판 위에 고품질의 GaN 에피층을 성장시키는 방법으로써 주목받고 있다. 본 논문에서는 고품질의 막을 제작하고 공정을 간소화하기 위해서 선택영역성장법을 도입하였고, 기존의 발광다이오드 특성에 영향을 주지 않는 선택영역의 크기를 규정하고자 한다. 실험에 사용된 원형의 선택성장영역의 직경크기는 2500, 1000, 350, 200 ${\mu}m$이고, 선택성장 된 발광다이오드의 소자 특성을 얻고자 SEM, EL, I-V 측정을 시행하였다. 주된 발광파장의 위치는 직경크기 2500, 1000, 350, 200 ${\mu}m$에서 각각 485, 480, 450, 445 nm로 측정되었다. 직경 350, 200 ${\mu}m$에서는 불규칙한 표면과 기존 발광다이오드보다 높은 저항 값을 얻을 수 있었지만, 직경 2500, 1000 ${\mu}m$에서는 평탄한 표면과 앞서 말한 350, 200 ${\mu}m$의 특성보다 우수한 전류-전압 특성을 얻을 수 있었다. 이러한 결과들로 기존 발광다이오드의 특성에 영향을 주지 않는 적당한 선택성장 직경크기는 1000 ${\mu}m$ 이상임을 확인하였다.

오존 처리한 폐식용유의 화학구조와 pMDI로 제조한 접착제의 목재 접착강도 (Chemical Structure of Ozonized Waste Cooking Oil and Wood Bonding Strengths of Reaction Products with pMD)

  • 강찬영;이응수;류재윤;이현종;서준원;박헌
    • Journal of the Korean Wood Science and Technology
    • /
    • 제38권4호
    • /
    • pp.316-322
    • /
    • 2010
  • 본 연구의 목적은 폐식용유를 오존산화 처리에 의한 구조적 변성을 시도하고 이를 pMDI와 반응시켜 목재접착제로 개발하고자 하는 것이다. 폐식용유를 사용하여 1, 2, 3시간 오존산화 처리 한 후 화학적 변화를 알아보기 위하여 FT-IR을 측정하였다. 또한 접착강도를 조사하기 위하여 상태, 내수, 내온수, 반복끓임 실험을 하였다. FT-IR 측정 결과, 폐식용유의 오존산화가 진행될수록 불포화 이중결합에 기인한 3,010 $cm^{-1}$ 부근의 흡수가 사라지고 1,700 $cm^{-1}$ 부근의 카르복실기의 흡수가 크게 나타났다. 특히 3시간대에 3,010 $cm^{-1}$ 부근에 이중결합이 거의 사라짐을 알 수 있었다. 3시간 처리한 폐식용유의 상태 접착력 시험 결과, 폐식용유: pMDI 비율이 1 : 0.5일 때 8.08 kgf/$cm^2$, 1 : 0.75일 때 9.53 kgf/$cm^2$, 1 : 1일 때 44.16 kgf/$cm^2$ 1 : 2일 때 58.08 kgf/$cm^2$, 1 : 3일 때 61.41 kgf/$cm^2$, 1 : 4일 때는 46.95 kgf/$cm^2$를 나타내어 MDI와의 적정당량이 1 : 2, 1 : 3 부근에서 결정됨을 알 수 있었다. 중량비 1 : 2, 1 : 3만을 선택하여 각각 내수, 내온수, 반복끓임 상태로 접착강도 시험을 실시하였다. 내수 접착강도에서는 1 : 3의 경우가 더 높은 값을 보였으나 실험조건이 강화된 내온수, 반복 끓임에서는 혼합비율 1 : 2와 1 : 3이 비슷한 값을 나타내었다.

초박층 교면포장용 폴리머 콘크리트의 물리적 특성 (The Physical Properties of Polymer Concrete for Ultra Thin Bridge Deck Pavement)

  • 김현준;손영효;한범진;정지은;박선규
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제17권3호
    • /
    • pp.74-81
    • /
    • 2013
  • 본 연구는 국내에서 개발 중인 초박층 교면포장용 폴리설파이드 에폭시 폴리머 콘크리트의 물리적 특성을 파악하고 국내로의 적용 가능성을 향상시키기 위해 수행되었다. 바인더와 폴리머 콘크리트의 배합실험을 통해 폴리머 콘크리트의 최적 배합비율을 결정하고, 결정된 배합비율로 생산된 폴리머 콘크리트에 대하여 압축, 휨, 부착 강도 시험을 수행하여 강도특성을 파악하였으며 동결 융해 저항성 시험을 통해 폴리머 콘크리트의 내구성을 평가하였다. 강도 시험 결과, 우수한 강도 성능과 휨 추종성을 나타내었고 미국콘크리트학회에서 제시하는 모든 강도 기준을 충족하였다. 또한 다양한 온도에서의 강도 시험에서도 기존의 재료에 비하여 개선된 성능을 나타내었다. 동결 융해 시험 및 동결 융해 과정을 거친 시편의 강도 시험 결과, 폴리머 콘크리트의 내구성에는 전혀 문제가 없는 것으로 판단된다. 따라서 본 연구에서 새롭게 개발된 폴리머 콘크리트는 초박층 교면포장으로 사용하기에 적절한 특성을 가지고 있을 뿐만 아니라, 온도 민감성도 개선되어 기존의 초박층 교면포장 재료에 비해 폭 넓은 적용성을 갖춘 것으로 판단된다.

불소화 및 초음파 수세가 폴리(에틸렌 테레프탈레이트) 필름의 표면 특성에 미치는 영향 (Effect of Fluorination and Ultrasonic Washing Treatment on Surface Characteristic of Poly(ethylene terephthalate))

  • 김도영;인세진;이영석
    • 폴리머
    • /
    • 제37권3호
    • /
    • pp.316-322
    • /
    • 2013
  • 본 연구에서는 고분자 소재 중 하나인 폴리(에틸렌 테레프탈레이트)(poly(ethylene terephthalate), PET) 필름의 표면을 친수성으로 개질하기 위하여 기상 불소화 및 초음파 수세를 실시하였다. 표면 처리된 PET 필름의 표면 특성은 접촉각, 표면 자유에너지, 주사전자 현미경(FE-SEM), 원자간력 현미경(AFM), X선 광전자분석법(XPS)을 통하여 분석하였다. 직접 불소화 및 초음파 수세 처리된 PET 필름의 물 접촉각은 $10.8^{\circ}$으로 미처리된 PET에 비하여 85% 감소하였고, 총 표면 자유에너지는 $42.25mNm^{-1}$으로 미처리된 PET에 비하여 650% 증가하였다. 또한 RMS(root mean square) 거칠기는 1.965 nm로 미처리된 PET 필름에 비하여 348% 증가하였으며, 친수성 관능기인 C-OH 결합의 농도는 약 3배 가까이 증가하였다. 이는 직접 불소화 및 초음파 수세 처리된 PET 필름 표면에 형성된 친수성 관능기와 공동화 현상에 의한 화학적 식각 반응에서 기인한 것으로 생각된다. 이 결과로부터, 기상 불소화 및 초음파 수세 처리법은 PET 필름 표면을 친수성으로 쉽게 개질할 수 있는 효과적인 방법으로 기대된다.

Identification of Petroselinic Acid (Cis-6-octadecenoic Acid) in the Seed Oils of Some of the Family Umbelliferae (Panax schinseng, Aralia continentalis and Acanthopanax sessiliflorus) by GC-MS, IR, $^1H-and$ $^13C-NMR$ Spectroscopic Techniques

  • Kim, Seong-Jin
    • 한국응용과학기술학회지
    • /
    • 제22권4호
    • /
    • pp.323-331
    • /
    • 2005
  • Fatty acid compositions of the seed oils of P. schinseng, A. continentalis and A. sessiliflorus, were analyzed by gas chromatography (GC) equipped with a capillary column. A large unusual peak was observed just before the peak corresponding to oleic acid $(cis-9-C_{18:1})$. This unknown fatty acid was isolated by silver ion chromatography and then derivatized into the picolinyl ester. The mass spectrum of the picolinyl ester showed molecular ion at m/z=373 with other diagnostic ions such as m/z=178, 218, 232, 246, 274, 288, 302 and 344. Characteristic absorption peaks at $720\;cm^{-1}$, $1640\;cm^{-1}$ and $3010\;cm^{-1}$ in IR spectrum indicated the presence of cis-configurational double bond in the molecule. The $^1H-NMR$ spectrum of this acid gave two quintets centered at ${\delta}1.638$ (2H, C-3) and ${\delta}1.377$ (2H, C-4), and two multiplets centered at ${\delta}2.022{\sim}2.047$ (2H, C-5) and ${\delta}2.000{\sim}2.022$ (2H, C-8), and multiplet signals of olefinic protons centered at ${\delta}5.3015{\sim}5.3426$ (C-6, J=9.5 Hz) and ${\delta}\;5.3465{\sim}5.3877$ (C-7, J=9.5 Hz). The $^13C-NMR$ spectrum showed 18 carbon resonance signals including an overlapped signal at ${\delta}29.7002$ for C-12 and ${\delta}29.6520$ for C-13 (or they can be reversed), and other highly resolved signals at ${\delta}33.950$, ${\delta}24.558$, ${\delta}26.773$ and ${\delta}27.205$ due to C-2, C-3, C-5 and C-8 of a ${\Delta}^6-octadecenoic$ acid, respectively. From analysis results this unknown fatty acid could be identified as cis-6-octadecenoic acid. The seed oils of P. schinseng and A. sessiliflorus contained petroselinic acid (59.7%, 56.0%), oleic acid (18.3%, 6.1%) and linoleic acid (16.2%, 30.4%) with small amount of palmitic acid (3.0%, 3.1%) while the seed oil of A. continentalis comprised mainly oleic acid (30.2%), petroselinic acid (29.0%), linoleic acid (24.1%) and palmitic acid (13.1%).

바스티앙 비베스 작품에 나타나는 소통 - 『Elle(s)』, 『Le Goût du chlore』, 『Dans mes yeux』를 중심으로- (About the Communication in Bastien Vivès -Focusing on 『Elle(s)』, 『Le Goût du chlore』, 『Dans mes yeux』)

  • 서정행;이송이
    • 만화애니메이션 연구
    • /
    • 통권45호
    • /
    • pp.101-125
    • /
    • 2016
  • 바스티앙 비베스(Bastien $Viv{\grave{e}}s$)는 프랑스 그래픽노블의 대표주자로 손꼽히는 작가이다. 본 연구에서는 바스티앙 비베스 작품 "그녀들", "염소의 맛", "내 눈 안의 너"를 통해 그의 작품 세계의 특성을 연구하고, 작품 속에 나타나는 소통의 미학을 살펴보고자 한다. 그의 작품에서 주로 그려내는 것은 청춘의 사랑과 남녀 간의 소통, 즉 사랑에 빠진 남녀 사이에 소통이 어떤 중요한 의미를 지니는지에 대한 이야기이다. 1984년생인 젊은 작가는 사춘기를 지나고 청소년에서 청년이 되어 성인으로 거쳐 가는 과정에 걸쳐진 청춘 남녀의 풋사랑의 이야기를 본인과 본인 주변인의 이야기를 하듯 일상적인 어투로 그려내고 있다. 독특한 경험담이나 특출한 인물의 이야기를 들려주는 "타인"의 이야기가 아닌 "나"의 이야기를 그림으로써, 평범한 일상을 단순한 이야기 구조로 풀어나가며 독자와 감정을 교류하고, 열린 결말을 제공하여 독자와 감정을 소통해 나간다. 작가는 독자와의 감정 소통에 성공한 듯 보이지만, 결국 세 작품 속 남자주인공들은 여자주인공을 이해하지 못하고, 그녀와의 소통이 제대로 이루어지지 않은 채 당황스러움 속에 어리둥절하게 남겨진다. 바스티앙 비베스는 본인의 서투른 경험을 토대로 이루어진 사랑에 대한 세 작품을 통해서 남자와 여자 사이의 소통에 대해서 이야기하고 있다. 그에게 사랑에 대한 이야기는 결국 남녀 간의 소통의 이야기인 것이다.

콘크리트포장 위 아스팔트 덧씌우기용 택코팅 재료의 접착강도특성 연구 (Investigation into Bonding Characteristics of Tack Coat Materials for Asphalt Overlay on Concrete Pavement)

  • 조문진
    • 한국도로학회논문집
    • /
    • 제15권4호
    • /
    • pp.85-94
    • /
    • 2013
  • PURPOSES: The performance of tack coat, commonly used for layer interface bonding, is affected by application rate and curing time. In this study, bonding strength tests were performed according to the application rate and curing time of asphalt emulsion. Based on finding from this study, optimum application rates and curing times are proposed. METHODS: In order to investigate bonding characteristic of asphalt emulsion, tests were performed on both asphalt concrete pavement and portland concrete pavement. Also, asphalt emulsions were tested at the application rate of 0, 0.2, 0.4, 0.6, and $0.8{\ell}/m^2$ and at the curing time of 0, 0.5, 1, 2, and 24 hours. Pull-off test and shear bonding strength test, which commonly used for bonding strength measurement of asphalt emulsion, were adopted for this study. To assess field performance under different testing condition, asphalt emulsions were applied to in-service pavement. Throughout coefficient of determination analysis between material index properties from asphalt emulsion and mechanical response from bonding strength tests, performance correlativity was analyzed. RESULTS: Test results show that optimum application rate for asphalt overlay on asphalt concrete pavement (AOA) and asphalt overlay on concrete pavement (AOC) was $0.4{\sim}0.5{\ell}/m^2$ and $0.3{\sim}0.5{\ell}/m^2$, respectively. According to the curing time increment, tensile strength and shear strength of AOC were increased to 22~44% and 20~39%, respectively. AOA case also show strength increment in tensile strength (42%) and shear strength (9%). We tested the applicability of tack coat materials at the field sites, and our findings demonstrated that the bonding (for D and E) and rapid curing (for B, C, and D, E) performances were superior than others. Among material index properties, there was a high correlation between penetration ratio and bonding strength test result. CONCLUSIONS : Result show that interlayer bonding strength was affected by asphalt emulsion type, application rate and curing time. AOC required slightly higher application ($0.1{\ell}/m^2$) than AOA. Both AOA and AOC cases show higher strength at longer curing time. Up to 2hours of curing, rapid strength increments were observed, but strength increment ratio was decreased after 2hours of curing. From the observed correlation between penetration ratio and bonding strength, it is expected that penetration ratio can be used as one of important factors affecting bonding strength analysis.

띠형 섬유보강재의 폭과 설치간격에 따른 변형률 분포 및 인발강도 특성 평가 (Evaluation of Strain Distribution and Pullout Strength based on Width and Horizontal Spacing of Geosynthetic Strip)

  • 이광우;조삼덕;한중근;홍기권
    • 한국지반신소재학회논문집
    • /
    • 제11권2호
    • /
    • pp.39-47
    • /
    • 2012
  • 본 연구에서는 블록식 보강토옹벽에 적용이 가능한 띠형 섬유보강재에 대하여 대형인발시험을 수행하였으며, 시험결과를 바탕으로 지반 내에 포설된 보강재의 인장변형 및 유발인발력을 분석하였다. 또한 전체면적법과 유효면적법을 이용한 인발강도를 평가하였다. 최대인발력은 보강재 폭 및 수직응력 조건에 관계없이 끝단 인발변위가 15mm 이내에서 발현되었다. 그리고 보강재의 설치간격과 관계없이 인발력과 끝단 인발변위 관계에 의한 인발거동은 유사한 것으로 확인되었다. 띠형 섬유보강재의 인발에 의한 변형은 보강재의 폭과 관계없이 선단부에 집중되어 선단부분에서 큰 인발력이 유발된 것을 확인하였다. 이는 수직응력 조건에 따른 마찰저항 보강재의 결속력이 인발저항에 매우 큰 영향을 미치는 것을 의미한다. 따라서 띠형 섬유보강재는 인장특성이 고려된 유효길이에 따른 평가가 이루어져야 보다 합리적인 설계가 가능한 것으로 분석되었다.

Synthesis and Spectroscopic Characterization of Manganese(II), Iron(III) and Cobalt(III) Complexes of Macrocyclic Ligand. Potential of Cobalt(III) Complex in Biological Activity

  • El-Tabl, Abdou S.;Shakdofa, Mohamad M.E.;El-Seidy, Ahmed M.A.
    • 대한화학회지
    • /
    • 제55권6호
    • /
    • pp.919-925
    • /
    • 2011
  • A new series of manganese(II), iron(III) and cobalt(III) complexes of 14-membered macrocyclic ligand, (3,6,10,13,16,19-hexaazabicyclo[6.6.6]icosane-1,8-diamine) have been prepared and characterized by elemental analyses, IR, UV-VIS, $^1H$- and $^{13}C$- NMR spectra, magnetic susceptibilities, conductivities, and ESR measurements. Molar conductance measurements in DMF solution indicate that the complexes are electrolytes. The ESR spectrum for cobalt(III) complex in $CD_3OD+10%D_2O$ after exposure to $^{60}Co-{\gamma}$-rays at 77 K using a 0.2217 M rad $h^{-1}$ vicrad source showed $g_{\perp}$ > $g_{\parallel}$ > $g_e$, indicating that, the unpaired electron site is mainly present in the $d_z2$ orbital with covalent bond character. In this case, the ligand hyperfine tensors are nearly collinear with ${\gamma}$-tensors, so there is no major tendency to bend. Therefore, little extra delocalization via the ring lobe of the $dz^2$ orbital occurs. However, the ESR spectrum in solid state after exposure to $^{60}Co-{\gamma}$-rays at 77 K showed $g_{\parallel}$ > $g_{\perp}$ > $g_e$, indicating that, the unpaired electron site is mainly present in the $d_x2_{-y}2$ ground state as the resulting spectrum contains a large number of randomly oriented molecules provided that, the principle directions of g and A tensors. Manganese (II) complex 2, $[H_{12}LMn]Cl_4.2H_2O$, showed six isotropic lines characteristic to an unpaired electron interacting with a nucleus of spin 5/2, however, iron(III) complex 3, $[H_{12}LFe]Cl_5.H_2O$, showed spectrum of a high spin $^{57}Fe$ (I=1/2), $d^5$ configuration. The geometry of these complexes was supported by elemental analyses, IR, electronic and ESR spectral studies. Complex 1 showed exploitation in reducing the amount of electron adducts formed in DNA during irradiation with low radiation products.

수치해석을 통한 지진하중의 주기특성에 따른 그라운드 앵커의 거동 (Behaviour of Ground Anchor According to Period Characteristic of Seismic Load Using Numerical Analysis)

  • 오동욱;정혁상;윤환희;이용주
    • 터널과지하공간
    • /
    • 제28권6호
    • /
    • pp.635-650
    • /
    • 2018
  • 최근 국내에 발생된 지진으로 인해 더 이상 한반도가 지진으로부터 안전지대가 아니라는 것이 많은 사람들에게 각인되었다. 경주와 포항에서 발생된 지진은 그 동안 국내에서 내진설계에 기준으로 고려한 지진의 특성과 상이하게 나타났고, 그에 따른 내진설계 방법에 대한 연구 또한 많은 연구자들에 의해 수행되어 지고 있다. 이러한 지진하중에 대한 고려는 주로 기존 상부 구조물에 초점이 맞춰져 있으며, 그에 따른 연구 또한 활발히 이루어지고 있는 실정이다. 하지만, 지반의 구조적 안정성을 확보하기 위해 시공된 네일, 록볼트, 그라운드 앵커 등과 같은 지중구조물에 대한 지진하중으로부터의 구조적 안정성에 대한 고려는 많이 이루어지지 않고 있는 실정이다. 본 연구에서는 풍화암에 정착된 그라운드 앵커에 대해 정하중이 작용할 때와 지진하중이 앵커에 미치는 영향을 분석하였다. 정하중에 의한 영향은 현장 인장시험 결과로, 지진하중 영향은 수치해석을 통해 파악하였다. 그 결과, 앵커에 긴장력 도입으로 인한 반력판의 침하가 발생하는 것으로 나타났으며, 그로 인한 앵커의 축력 감소가 발생하였다. 또한 지진하중에 의해 앵커 정착부의 변위가 증가하였으며, 정착부 길이가 길수록 장주기 지진에 의한 영향이 큰 것으로 나타났다.