• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.283-285
• /
• 2002

Boiler combustion systems are large, non-linear systems with numerous interactions between its component parts. In the analysis of such complex systems. dynamic simulation is recognized as a powerful method of keeping track of the myriad of interactions. This paper shows and discusses the developed analysis model, such as the forced draft fan the primary air fan, the furnace and burner system, pulverizer, air preheater and induced draft fan, etc. in accordance with BMCR condition of boiler using the Modular Modeling System(MMS) software.

• 제어로봇시스템학회논문지
• /
• 제6권4호
• /
• pp.247-253
• /
• 2000

In this paper, we deal with the full range control problem of nonlinear boiler systems subject to complex actuator constraints. Firstly, $H\infty$ loop shaping design procedure［10］ is used for the controller design. Secondly, modified high-gain feedback［11］ for the loop shaping controller is adopted for the anti-windup function and the bumpless transfer technique between controllers is proposed for the full range control of nonlinear systems. Finally, the performance of the proposed controller is demonstrated through the simulation studies.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.287-288
• /
• 2007

This paper is for a Real-time Active Control System to operate a boiler. By sensing of flame we wanted to get status of a furnace as many as possible, like load, efficiency, and/or amount of pollutant. These data can be used to make optimal running point by controlling the ratio of air and fuel. So the last object is to make a closed actual control loop from optical head to valve controllers. The first job was to design and to develop a optical data acquisition system. including optical sensor module. And we gathered flame data in variable situations for taking the trend of flame against burning environment. Currently we are developing a general system model, designing some control strategy and testing this active control system.

• 에너지공학
• /
• 제23권4호
• /
• pp.49-55
• /
• 2014

석탄화력 발전소 보일러의 부식 메카니즘에 대한 실증적 고찰을 위하여 500MW 표준화력 발전소 보일러에 대한 보일러 튜브의 두께측정 및 수치해석을 병행하여 분석을 시행하였다. 그 결과 접선연소방식의 보일러 수냉벽 튜브의 부식에 가장 핵심적인 영향을 미치는 메카니즘은 퇴적된 미연탄소분에 포함된 유황분에 의한 부식이었으며, 두 번째 요소는 보일러 내부에서 국부적인 환원성 분위기가 생성되는 위치에서의 $H_2S$ 가스에 의한 부식으로 나타났다. 이와 같은 수냉벽튜브 부식을 완화시키기 위해서는 보일러의 다단연소 운전을 감소시키는 것이 필요하며, 미연분 감소를 위한 엄격한 미분도 관리 및 부식 취약부위에 대한 내부식 코팅보강 작업이 필요하다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전력기술부문
• /
• pp.282-285
• /
• 2001

In general, the PSS/E program based on RMS mathematical models is used for analyzing the steady state and transient stability phenomena of full-scale large power system. Whereas, the EMTDC program unlike PSS/E, studies the specific reduced small-scale power systems as a basis of instantaneous value mathematical models and used to analyze the Electro-Magnetic transient characteristics. The PSS/E provides various control models such as exciter, governor, PSS models and TGOV5 model but there are few control models in EMTDC. In this paper, we developed EMTDC model for TGOV5 of a steam turbine and boiler which represents governor action, main, reheat and low-pressure effects, including boiler effects. The EMTDC model is developed by examining PSS/E control block and using User Define Model(UDM) in addition to default.lib provided by EMTDC. We verify the correctness of developed TGOV5 model with PSS/E and EMTDC simulation results using Governor Step(GSTEP) method.

• 플랜트 저널
• /
• 제15권2호
• /
• pp.56-61
• /
• 2019

본 연구에서는 500 MW급 초임계압 석탄 화력발전소의 발전보일러용 고압 급수가열기에서 발생한 내부 튜브의 파손 사례 분석을 통해 운전 기록 모니터링에 의한 발전보일러용 고압 급수가열기 내부 튜브의 파손 예측 방안을 모색하고자 하였다. 이 연구를 통해 고압 급수가열기 내부 튜브 파손 시 쉘 측 수위 조절 밸브 개도와 보일러 급수펌프 흡입 유량의 변화로 내부 튜브 파손을 진단할 수 있는 예측 모형을 제안하였고, 제안된 예측 모형은 급수 계통의 불균형이 일어난 추가 사례를 통해 실증하였다. 이에 따라 본 연구와 유사한 특성의 발전보일러용 고압 급수가열기의 경우에도 쉘 측 수위 조절 밸브 개도와 보일러 급수펌프의 흡입 유량의 정상 운전 상태 값 대비 현재 운전 값 비교는 고압 급수가열기 내부 튜브의 파손에 대한 유력한 예측 진단 방안이 될 수 있다고 판단된다.

• 전기학회논문지P
• /
• 제62권3호
• /
• pp.117-126
• /
• 2013

This paper is written for the development and application of boiler furnace pressure control algorithm and distributed control system of coal-fired power plant by the steps of design, coding, simulation test, site installation and site commissioning test. The control algorithms were designed in the shape of cascade control for two parts of furnace pressure control and induced draft fan pitch blade by standard function blocks. This control algorithms were coded to the control programs of distributed control systems. The simulator for coal-fired power plant was used in the test step and automatic control, sequence control and emergency stop tests were performed successfully like the tests of the actual power plant. The reliability was obtained enough to be installed at the actual power plant and all of distributed control systems had been installed at power plant and all signals were connected mutually. Tests for reliability and safety of plant operation were completed successfully and power plant is being operated commercially. It is expected that the project result will contribute to the safe operation of domestic new and retrofit power plants, the self-reliance of coal-fired power plant control technique and overseas business for power plant.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.880-882
• /
• 1999

Virtual Reality is a set of computer technologies which, when combined, provide an interface to a computer-generated world, and in particular, provide such a convincing interface that the user believes he is actually in a three dimensional computer-generated world. This computer generated world may be a model of a real-world object, such as a house; it might be an world that does not exist in a real sense but is understood by humans, such as a chemical molecule or a representation of a set of data; or it might be in a completely imaginary science fiction world. this paper describes the application of boiler digital control system MMI for power plant using virtual reality

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.194-199
• /
• 1990

Because of being operated to accomodate the load variation, fossile power plants need modern controller to satisfy frequency regulation, fast response and efficiency requirement. But in the way of developing the Digital Instrumentation and Control System that can adopt advanced control algorithms, power plant simulator must be available for safe and convenient test. In this paper, a simple drum-type boiler model is proposed, using Signal Flow Diagram that describes the system by a collection of basic time response representing the relationship between process variables. After verifying the model and thereafter building simulator based on the proposed model, we test the operation of controller and approve stability or efficiency of implemented control algorithms.

• 대한전기학회논문지
• /
• 제39권12호
• /
• pp.1269-1280
• /
• 1990

Owing to the need to accommodate the load variation, thermal power plants need a modern controller in order to achieve better frequency regulation, faster response and higher efficiency. For a successful development of the digital instrumentation and control system that can adopt advanced control algorithms, power plant simulator must be available for safe and convenient test. In this paper, a simple drum-type boiler model is proposed using Signal Flow Diagram that describes the system by a combination of basic time responses representing the relationships between cause and effect process variables. After verifying the model and thereafter building a simulator based on the proposed model, we tested the operation of the controller and stability or efficiency of the implemented control algorithms.