• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 추계학술대회 논문집
• /
• pp.558-565
• /
• 1999

Rubber wheel-type AGT has two major kinds of bogie; one is the bogie type and the other and passenger loads. This paper deals with the statics analysis for two types of bogie frame subjected to combined external forces, as well as independent ones specified in UIC 515-4. Furthermore, the dynamics analysis is performed under vibrational loading conditions so as to compare dynamic characteristics, Numerical results by using commercial packages, Ⅰ-DEAS and NASTRAN show that maximum stresses do not exceed the yielding level of material used for both bogies. From an overall viewpoint of strength, the bogie type turns out to be superior to the steering type except the case of a lateral loading. It is also observed that the steering type shows a be stiffened. It is strongly anticipated that vibrational fatigue analysis should be carried out under realistic loading conditions closely matching to situations such as running surface and lateral clearances along the guideway.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.361-364
• /
• 2005

Some bogie frames manufactured in 1999, 2000 year have the fatal problem. Three or four years later, the cracked end beam among them have discovered in 2002, 2003 year. The crack situation of the end beam have a bad effect on brake system. In that case, the cars would be in danger of derailment. To improve the end beam, a research of covering the whole field of welded type bogie frame was started. Main line real tests were performed at Young-Dong line. The stress of main positions for bogie frame was measured. Also up-down direction and left-right direction vibration acceleration of the bogie frame were measured. At this time the tests were performed for the three types bogie. The test result concludes that the crack cause of the end beam is not brake load but vibration at running mainly. It is estimated that the life of the improved car which end beam reinforced is safe within the car permitted life(25 years). The improvement methods of the end beam are presented by construction modification, parts modification. The integrity evaluation is inspected by analysis the real line test results, the improvement methods of the end beam.

• 한국생산제조학회지
• /
• 제26권4호
• /
• pp.436-440
• /
• 2017

This study evaluated the design and structural integrity of a three-axle bogie frame in a railway freight car through a numerical analysis and an experimental evaluation. A three-axle bogie frame, which supports the weight of the car body and load, is required to transport heavier cargo because two-axle vehicles have structural limitations. Therefore, this study performed a structural analysis and static load tests to evaluate the design and structural integrity of a three-axle bogie frame. The results obtained from the numerical analysis were compared to those of the experiments. For the bogie frame used in the experiments, a failure evaluation was performed using non-destructive methods. The numerical analysis and experimental evaluation were satisfactory for the structural integrity evaluation.

• 한국정밀공학회지
• /
• 제32권7호
• /
• pp.619-625
• /
• 2015

There is a large interest to find reliable and automatic methods for crack detection and quantification in the railway bogie frame. The non-destructive inspection of railway bogie frame has been performed by ultrasonic and magnetic particle testing in general inspection. The magnetic particle method has been utilized in the defect inspection of the bogie frame but the grinding process is required before inspection and the dust is developed resulting from the processing. The objective of this paper is to apply the inspection method of bogie frame using infra-red thermography. The infra-red thermography system using the excitation of eddy current was performed for the defect evaluation of weld specimen inserted artificial defects. The result shows that the infra-red thermography method can detect the surface and inner defects in weld specimen for bogie frame.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(II)
• /
• pp.892-897
• /
• 2002

The research was requested by Meridian Rail Corporation in United States. The Swing Motion Bogie can application by Korea style if synthesize study result of bogie strength evaluation, bogie dynamic characteristics analysis, actual test(maximum speed, derailment coefficient, lateral force, vertical force, vibration acceleration, steady state lateral acceleration) etc..

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.589-594
• /
• 2004

This paper has evaluated the fatigue strength of a tilting bogie frame for the Korean tilting train. We have established the loading combinations for the tilting bogie frame based on the UIC standard because there are no standards for the tilting train. For this study, we have derived 31 load cases to consider tilting effect. Then, we have performed the static and fatigue analysis. From this study, we can make sure the safety of the tilting bogie.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 추계학술대회 논문집
• /
• pp.537-544
• /
• 1998

This paper reports in the investigation results about residual life cycle evaluation of the bogie frames. The investigations consist of following two items. The residual life cycle evaluation and wholesome state developed in the bogie frames. The statistical data of analysis about crack occurrences checked at each part of the bogie frames in preliminary and precision inspections. These results support the possibility of extending the life cycle by 5 years.

• 해양환경안전학회지
• /
• 제28권1호
• /
• pp.153-160
• /
• 2022

본 연구는 선박 육상건조를 위한 로드-아웃 시스템(Load-out System)의 보기(Bogie;대차) 배치 방법과 그 적용사례에 대한 표준을 제시하였다. 로드-아웃 시스템은 도크 설비 없이 육상에서 선박을 건조하는 가장 중요한 시스템 중 하나로, 본 시스템은 보기, 모터부착 보기, 트레슬, 파워팩의 4가지 장비로 구성되어 있다. 또한, 선박의 구조적 안전을 위해 트레슬의 반력을 계산하고 적절한 보기의 대수를 결정하였다. 이러한 맥락에서 본 연구의 목적은 최소한의 비용으로 구조적 안전요건을 만족하는 보기 배치를 수행할 수 있는 최적의 시스템 설계방법을 제안하고 과도한 보기 배치에 따른 기업의 손실을 줄이는 데 그 목적이 있다. 제안된 방법은 육상건조 단계에서 조선사들의 생산 경쟁력 향상은 물론 실효성 있는 작업절차 구현에도 기여할 것으로 기대된다. 또한, 로드-아웃 과정에서 선체 바닥에서 발생할 수 있는 선체변형에 대한 위험을 최소화하기 위하여 114K 원유 탱커(최소 보기 수 54대)와 174K CBM LNG 운반선(최소 보기 수 88대)에 보기 배치 방법을 적용하여 육상건조 선박의 보기의 수와 임계 위험(안전율 1.61)을 최소화할 수 있도록 하였으며, 본 연구를 통해 독자는 향후 성공적인 육상건조와 이에 따른 경제적인 선박건조를 수행할 수 있을 것으로 판단한다.

• 한국철도학회논문집
• /
• 제10권6호
• /
• pp.800-805
• /
• 2007

철도차량용 대차의 한계 성능에 대한 검증은 설계 검증 및 안전성 확보관점에서 매우 중요하다. 차량의 안정성과 관련된 대차의 임계속도는 차량 개발 단계에서 총상 주행시험대를 이용하여 시험을 수행한다. 그러나 실물 대차를 이용한 시험과정에서 다양한 시제차량 제작 및 시험 조건 설정의 어려움, 시험 소요시간의 과다 등에 의한 단점을 내포한다. 따라서 철도 선진국등에선 과거 오래전부터 축소모델을 이용한 차량 개발 연구가 활발하였다. 따라서 본 연구에서는 대차의 임계속도 및 동적 거동 분석을 위하여 상사기법을 적용한 축소대차를 제작하였고 이를 시험하기 위한 축소 주행 시험대를 개발하였다. 축소대차 임계속도에 대한 수치해석을 수행하였으면 주행시험대상에서의 임계속도 시험을 통하여 해석결과가 시험결과에 부합함을 확인할 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.859-860
• /
• 2012