• Journal of Technologic Dentistry
• /
• v.10 no.1
• /
• pp.177-183
• /
• 1988

This paper aims to examine ceramic shade prescriptions for work authorizations in all its aspectclincal information, recording information, technical considerations, extended application, practical applications. The results are as follows : 1. The basic application provides essential data for ceramic veneer fabrication. 2.Three-dimensional information divides the space for body and enamel components. 3. The second body shade selection improves shade matching in the middle one-third of the tooth and enhences the appearance of the enamel component. 4. Ceramists are encouraged to recognize the influence each component has upon the total shade composition. 5. A format is established for recording clinical information. 6. The use of available ceramic systems is seemingly unlimited. The method presented provides flexisility for recording the most detailed shade information in simple graphic and verbal terms. 7. Technical simplification is a by-product of complete, precise work information.

• Journal of The Korean Astronomical Society
• /
• v.46 no.4
• /
• pp.151-159
• /
• 2013

We discuss the orbital period changes of the Algol semi-detached eclipsing binary DI Peg by constructing the (O-C) residual diagram via using all the available precise minima times. We conclude that the period variation can be explained by a sine-like variation due to the presence of a third body orbiting the binary, together with a long-term orbital period increase (dP/dt=0.17 sec/century) that can be interpreted to be due to mass transfer from the evolved secondary component (of rate $1.52{\times}10^{-8}M_{\odot}/yr$) to the primary one. The detected low-mass third body ($M_{3min.}=0.22{\pm}0.0006M_{\odot}$) is responsible for a periodic variation of about 55 years light time effect. We have determined the orbital parameters of the third component which show a considerable eccentricity $e_3=0.77{\pm}0.07$ together with a longitude of periastron ${\omega}_3=300^{\circ}{\pm}10^{\circ}$.

• Journal of Nutrition and Health
• /
• v.20 no.4
• /
• pp.281-288
• /
• 1987

In this study we have evaluated daily beverage intake of the inhabitants in Seoul by a 24 hrs. recall procedure from 1145 respondents between pre-school children to adults in the period of June-July 1985. Estimates of consumption were made for each of seven beverage groups and comparisons were made within age, sex and body weight. Significant differences existed for certain beverage in each category analyzed. Total Fluid intake was greater for male than female at all ages and tended to be lower in the older age group with adjustment for differences in body weight. Milk was the major beverage among children while soft drinks were the predominant beverage for teen-ages. Alcoholic drinks represented the smallest component of daily fluid intake among women but were the second largest component of daily fluid levels for men over the age of 24 years.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.1
• /
• pp.168-173
• /
• 2004

This article describes the design of a hydraulic system for a power split type continuously variable transmission (CVT). The CVT considered here, is composed of planetary gears, clutches, and a torque converter which is mainly used for the realization of CVT function. Similar to automatic transmissions, the hydraulic system of CVT is designed for supplying hydraulic flows and pressures to each component of CVT, in order to activate the clutch engagements and torque converter operation, and to cool the drivetrain. By using the mathematical models of drivetrain, a simulation program was developed to investigate the power performance of CVT equipped vehicle and the operating conditions of each component of CVT. And the design parameters of the hydraulic system and clutches were calculated using the operating conditions and power requirements which obtained from the simulation results. Finally the hydraulic circuit design of prototyped valve body is presented based on the numerical results of this analysis.

• Journal of The Korean Astronomical Society
• /
• v.29 no.spc1
• /
• pp.143-144
• /
• 1996

Two-component models (normal star and degenerate star components) are the simplest realization of clusters with a mass spectrum because the high mass stars quickly evolve off leaving degenerate stars behind, while low mass stars survive for a long time as main-sequence stars. In the present study we examine the post-collapse evolution of globular clusters using two-component Fokker-Planck models that include three-body binary heating. We confirm that a simple parameter ${\epsilon}{\equiv} (E_{tot}/t_{rh})/(E_c/t_{rc})$ well describes the occurrence of gravothermal oscillations of two-component clusters. Also, we find that the degree of instability depends on the steepness of the mass function such that clusters with a steeper mass function are less exposed to instability.

• Korean Journal of Veterinary Research
• /
• v.53 no.1
• /
• pp.7-10
• /
• 2013

A study was conducted to determine the interdependence among the conformation traits of 28 "Pallaresa" cows using principal component analysis. Originally 21 body linear measurements were obtained, from which eight traits are subsequently eliminated. From the principal components analysis, with raw varimax rotation of the transformation matrix, two principal components were extracted, which accounted for 65.8% of the total variance. The first principal component alone explained 51.6% of the variation, and tended to describe general size, while the second principal component had its loadings for back-sternal diameter. The two extracted principal components, which are traits related to dorsal heights and back-sternal diameter, could be considered in selection programs.

• Journal of Sensor Science and Technology
• /
• v.25 no.1
• /
• pp.71-78
• /
• 2016

PPG signal measured by pulse oximeter can measure pulse and the oxygen saturation of arterial blood. But the PPG signal is distorted by finger movement or other movement in the body. To detect pulse from the PPG signal with motion artifact, we use band pass filter(BPF), Independent component analysis(ICA) and nonlinear autocorrelation(NAC). BPF is used to remove DC component and high frequency noise in the PPG signal with motion artifacts. ICA is used to separate pulse signal and motion artifact. However, pulse signal separated by ICA have no choice but to accompany signal distortion because pulse signal and motion artifact are not completely independent. So, we use nonlinear autocorrelation to emphasize the pure pulse signal from the distorted signal.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.9
• /
• pp.127-134
• /
• 1998

This paper describes the design of a 6-component force/moment calibration machine with having the maximum capacities of 500 N in forces and 50 Nm in moments. To be used for the characteristic of a multi-component load cell. this machine consists of a body, a fixture, a force generating system, a moment generating system and weights. We have also evaluated the accuracy of the calibration machine. Test results show that the expanded relative uncertainty for force components $\pmFx,\;\pmFy\;and\;moment\;components\;\pmMx,\;\pmMy\;are\;less\; than\;8.6\times10^{-4}$, and force components +Fz, -Fz and moment components $\pmMz\;is\;less\;than\;1.6\times10^{-3},\;2.0\times10^{-5},\;1.7\times10^{-3}$ respectively.

• International Journal of Automotive Technology
• /
• v.4 no.1
• /
• pp.21-30
• /
• 2003

In this paper a systematic test procedure for evaluation of road-induced noise of a vehicle and guidelines for each test are presented. Also, a practical application of the test procedure to a small SUV is presented. According to the test procedure, all the tests were performed to evaluate road-induced booming noise that is in low frequency range. First of all the information on characteristics of road-induced noise was obtained through baseline test. Coupling effects between body structure and acoustic cavity of a compartment were obtained by means of modal tests for a structure and an acoustic cavity. Local stiffness of joint areas between chassis system and car-body was determined by test for measurement of input point inertance. Noise sensitivities of body joints to operational forces were obtained through test for measurement of noise transfer functions. Operational deflection shapes made us analyze behaviors of chassis system under running condition and then find sources of noise due to resonance of the chassis system. Finally, Principal Component Analysis and Transfer Path Analysis were utilized to investigate main paths of road-induced noise. In order to evaluate road-induced booming noise exactly, all of tests mentioned above should be performed systematically.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.20 no.4
• /
• pp.400-409
• /
• 2013

Purpose: This study was conducted to define factors influencing health-related quality of life (HRQOL) in women undergraduates. Independent variables of physical activity, attitude to eating, satisfaction with body shape, stress and self-esteem were used to predict HRQOL. Method: Data were analyzed using the SPSS/WIN 20.0 program for descriptive statistics, Pearson correlation coefficients and stepwise multiple regression. Participants were 245 women undergraduates who were recruited from July to September 2012. Result: The mean for the physical component summary (PCS) of HRQOL was 73.89, and for the mental component summary (MCS) was 68.45. There were significant correlations between attitude to eating, satisfaction with body shape, stress, self-esteem and the two components of HRQOL. The groups with minimal or health enhancing activity were significantly higher in PCS and MCS than the inactivity group. Stepwise multiple regression analysis indicated that 35% of the variance in PCS was significantly accounted for by self-esteem, perceived stress, attitude to eating, and physical activity, and 45% of the variance in MCS was significantly accounted for by perceived stress, self-esteem, attitude to eating, and satisfaction with body shape. Conclusion: The results indicate that these factors influencing HRQOL should be considered when developing programs to improve HRQOL for women undergraduates.