• Journal of Hydrospace Technology
• /
• v.2 no.2
• /
• pp.36-43
• /
• 1996

In this work, a panel method is described, which cart solve the flow field round a surface-piercing body that experiences lift and wave resistance. As the body boundary condition, a Dirichlet type is employed, and as the free surface boundary condition the Poisson type is implemented, while in its discretization Dawson's 4-point upwind difference scheme is utilized, and as the Kutta condition a Morino-Kuo type is chosen. As to the type of singularity, source panels are distributed on the free surface, and source and dipole panels on the body surface, and dipole panels on the wake surface. For a sample run, a catamaran of the parabolic Wigley hull is chosen, for which experimental data are available, and the predictions by the numerical means and by the experiment are compared for a wide range of parameters.

• Journal of the Korean Society of Safety
• /
• v.30 no.3
• /
• pp.1-6
• /
• 2015

Self-piercing riveting (SPR) is receiving more recognition as a possible and effective solution for joining automotive body panels and structures, particularly for aluminum parts and dissimilar parts. In this study, static strength and fatigue tests were conducted using coach-peel and cross-tension specimens with Al-5052 plates for evaluation of fatigue strength of the SPR joints. For the static experiment results, the fracture modes are classified into pull-out fracture due to influence of plastic deformation of joining area. During the fatigue tests for the coach-peel and cross-tension specimens with Al-5052, interface failure mode occurred on the top substrate close to the rivet head in the most cycle region. There were relationship between applied load amplitude $P_{amp}$ and life time of cycle N, $P_{amp}=715.5{\times}N^{-0.166}$ and $P_{amp}=1967.3{\times}N^{-0.162}$ were for the coach-peel and cross- tension specimens, respectively. The finite element analysis results for specimens were adopted for the parameters of fatigue lifetime prediction. The relation between SWT fatigue parameter and number of cycles was found to be $SWT=192.8N_f^{-0.44}$.

• Journal of Ocean Engineering and Technology
• /
• v.16 no.3
• /
• pp.8-18
• /
• 2002

Formulation of the far-field method for the prediction of time-mean hydrodynamic force and moment acting on a 3-D surface-piercing body in waves is reviewed. It is found that the inequality between the weight of the floating body and its buoyancy force permits the replacement of the fluid particles inside the control surface by the fluid particles outside the control surface. Under such circumstances, momentum exchanges across the control surface make the time-mean value of the time rate of the momentum of the fluid inside the control surface non-vanishing. It is a second-order quantity which is hard to calculate by the far-field method. The drift forces and moments on half-immersed ellipsoids are calculated by both the far-field method and the near-field method. The discrepancy between two numerical results is presented and discussed.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.24 no.1
• /
• pp.1-8
• /
• 1987

It is shown that irregular frequencies in the source and doublet distribution method, can be eliminated if the Green function associated with Kelvin's source of pulsating strength, is modified only in the region inside the body at the level of the undisturbed free surface. The system of the resulting Green integral equation is augmented without loss of the square-integrable property of its kernel so hat the discretisation yield N linearly independent equations for N unknown variables. From the solution, the potential and velocity at any point on the wetted surface of a surface-piercing body can be found using the properties of the double layer composed of the source and normal doublet distribution.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.4
• /
• pp.66-74
• /
• 1992

A panel method in the spirit of Hess & Smith(1962), and also of Dawson(1977) was developed to compute the wave resistance of a submerged, or a surface piercing, body moving in the water of finite depth. As a boundary condition on the free surface what is called the Poisson equation is used, while Yasukawa(1989) chose the Dawson equation for which the double-body flow is regarded as the basic one. In order to satisfy the boundary condition on the bottom surface automatically, the sum of a Rankine source and its image with respect to the bottom surface is chosen as the Green function, and hence the singularity is distributed only on the body and on the free surface thereby decreasing the required number of panels dramatically, compared to that of Yasukawa, without the consequential loss of accuracy. Calculations were done for a submerged sphere and for the Wigley hull, and the results are compared with other existing analytical and numerical data.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.10 no.2
• /
• pp.39-56
• /
• 2008

It is a remarkable phenomenon that tattoos has been rapidly spreading among women of modern years. The extremism of feminine ornaments, and pricking and piercing of the skin seem to have deep connection with women's consciousness changing to being independent, active and aggressive. The objective of this study is to analyze the potential quality of today's women, who appears emblematically through tattoo, and to search out the whole aspect and keynote of female tattoos. The methods of research are by examining the general characteristics including concept and history, considering the type and significance of ethnic female tattoos, and then comparing with the symbolism of today's female tattoos. The sphere is limited to women's tattoos from ancient times to today's modern lift, examined from large portions of Africa, Asia, Australasia, the Americas, and Arctic regions. As a result, the following had been reflected in female tattoos in the past. First, incantation, tribe, adult age, adornment, marital status, domestic ability and sex distinction, where among others, the incantatory, ornamental symbol, and domestic sign were representatives. Second, the most popular body parts for having a tattoo were around the lips, hands and abdominal region. Third, the more harsh the environment becomes such as tropical forests, isolated islands, and polar regions, the more number of females have tatoos. Fourth, women's tattoos were much less glamorous and smaller compared to those of men, distinguishing one's sex. On the other hand, today's female tattoos can be classified as five symbols: masculinity, independence, voluptuousness, affection, and purity. These symbols contain women's mentality to pass the limit, and to overcome social inferiority. In modern society, where women must compete with met it has become necessary for women to educe their potential masculine qualities. Being violent accessories for them, tattoos became a mark of such potential. Therefore, in the future, women's interest and demand for tattoos are expected to rise in proportion to the social demand of women's force.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.23 no.4
• /
• pp.25-34
• /
• 1986

A two-dimensional linear method has been developed for the motion and the second-order steady force arising from the hydrodynamic coupling between waves and currents in the presence of a body of arbitrary shape. Interaction between the incident wave and current in the absence of the body lies in the realm beyond our interest. A Fredholm integral equation of the second kind is employed in association with the Haskind's potential for a steadily moving source of pulsating strength located in or below the free surface. The numerical calculations at the preliminary stage showed a significant fluctuation of the hydrodynamic forces on the surface-piercing body. The problem is approximately solved by using the asymptotic Green function for $U^2{\rightarrow}0$. The original Green function, however, is applied for the fully submerged body. Numerical calculations are made for a submerged and for a half-immersed circular cylinder and extensively for the mid-ship section of a Lewis-form. Some of the results are compared with other analytical results without any available experimental data. The current has strong influence on roll motion near resonance. When the current opposes the waves, the roll response are generally negligible in the low frequency region. The current has strong influence on roll motion near resonance. When the current opposes the wave, the roll response decreases. When the current and wave come from the same direction, the roll response increases significantly, as the current speed increases. The mean drift forces and moment on the submerged body are more affected by current than those on the semi-immersed circular cylinder or on the ship-like section in the encounter frequency domain.

• Journal of Ocean Engineering and Technology
• /
• v.10 no.3
• /
• pp.74-82
• /
• 1996

수면상에 떠있는 2차원 물체에 작용하는 시간평균 표류력 및 표류모오멘트를 비점성 선형 포텐셜 이론을 사용하여 계산하는 방법에 대하여 검토하였다. 부유체 접수면상의 압력을 직접적분하여 구한 수평방향 표류력이 특정주파수 부근에서 음의 값을 보이고 있다. 이는 무한원방에서의 에너지 보전방법에 의한 표류력이 항상 양의 값을 취한다는 기존 이론과 상이하다. 본 논문에서, 이러한 차이가 부유체의 횡요 및 상하동요에 기인한 복원력의 성분과 횡요와의 연성효과에 의하여 발생하였음을 규명하였다. 이는 횡요가 있는 경우, 표류력을 산출하는 기존의 무한원방 방법에 결함이 있음을 보이고 있다. 이에 반하여 기존의 접수면압력 직접적방법은 부유체에 작용하는 시간평균 표류력 및 표류모오멘트를 모든 주파수에 대하여 정확하게 산출한다고 결론지울 수 있다.

• Journal of Welding and Joining
• /
• v.34 no.1
• /
• pp.21-25
• /
• 2016

The automotive vehicle is made through the following processes such as press shop, welding shop, paint shop, and general assembly. Among them, the most important process to determine the quality of the car body is the welding process. Generally, more than 400 pressed panels are welded to make BIW (Body In White) by using the RSW (Resistance Spot Welding) and GMAW (Gas Metal Arc Welding). Recently, as the needs of light-weight material due to the $CO_2$ emission issue and fuel efficiency, new joining technologies for aluminum, CFRP (Carbon Fiber Reinforced Plastic) and etc. are needed. Aluminum parts are assembled by the spot welding, clinching, and SPR (Self Piercing Rivet) and friction stir welding process. Structural adhesive boning is another main joining method for light-weight materials. For example, one piece aluminum shock absorber housing part is made by die casting process and is assembled with conventional steel part by SPR and adhesive bond. Another way to reduce the amount of the car body weight is to use AHSS (Advanced High Strength Steel) panel including hot stamping boron alloyed steel. As the new materials are introduced to car body joining, productivity and quality have become more critical. Productivity improvement technology and adaptive welding control are essential technology for the future manufacturing environment.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.1
• /
• pp.45-64
• /
• 1993

This paper dealt with the application of a numerical method developed by the authors using the matching method proposed in the previous paper on "The Nonlinear motions of cylinders(I)[16]", and Cauchy's theorem to the problems associated with hydrodynamic forces acting on a heaving cylinders translating in a calm water and also motions of cylinders in waves. In spectral method. body boundary condition in submerged case is satisfied exactly but one in floating case is not satisfied exactly. In the numerical code developed here, the boundary condition at the free-surface and body surface is satisfied exactly at its instaneous position. It is of interest to note that the present scheme could be applied to a free-surface-piercing body without experiencing a difficulty in the numerical convergence. The computed results are compared with other results([6], [12]).