• Journal of Biosystems Engineering
• /
• 제28권1호
• /
• pp.65-76
• /
• 2003

The analysis of cow body parameters is important to provide some useful information fur cow management and cow evaluation. Present methods give many stresses to cows because they are invasive and constrain cow postures during measurement of body parameters. This study was conducted to develop the stereo vision system fur non-invasive analysis of cow body features. Body feature parameters of 16 heads at two farms(A, B) were measured using scales and nineteen stereo images of them with walking postures were captured under outdoor illumination. In this study, the camera calibration and inverse perspective transformation technique was established fer the stereo vision system. Two calibration results were presented for farm A and fm B, respectively because setup distances from camera to cow were 510 cm at farm A and 630cm at farm B. Calibration error values fer the stereo vision system were within 2 cm for farm A and less than 4.9 cm for farm B. Eleven feature points of cow body were extracted on stereo images interactively and five assistant points were determined by computer program. 3D world coordinates for these 15 points were calculated by computer program and also used for calculation of cow body parameters such as withers height. pelvic arch height. body length. slope body length. chest depth and chest width. Measured errors for body parameters were less than 10% for most cows. For a few cow. measured errors for slope body length and chest width were more than 10% due to searching errors fer their feature points at inside-body positions. Equation for chest girth estimated by chest depth and chest width was presented. Maximum of estimated error fur chest girth was within 10% of real values and mean value of estimated error was 8.2cm. The analysis of cow body parameters using stereo vision system were successful although body shape on the binocular stereo image was distorted due to cow movements.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권11호
• /
• pp.4395-4412
• /
• 2020

The multisource image fusion has become an active topic in the last few years owing to its higher segmentation rate. To enhance the accuracy of multimodal pig-body feature segmentation, a multisource image fusion method was employed. Nevertheless, the conventional multisource image fusion methods can not extract superior contrast and abundant details of fused image. To superior segment shape feature and detect temperature feature, a new multisource image fusion method was presented and entitled as NSST-GF-IPCNN. Firstly, the multisource images were resolved into a range of multiscale and multidirectional subbands by Nonsubsampled Shearlet Transform (NSST). Then, to superior describe fine-scale texture and edge information, even-symmetrical Gabor filter and Improved Pulse Coupled Neural Network (IPCNN) were used to fuse low and high-frequency subbands, respectively. Next, the fused coefficients were reconstructed into a fusion image using inverse NSST. Finally, the shape feature was extracted using automatic threshold algorithm and optimized using morphological operation. Nevertheless, the highest temperature of pig-body was gained in view of segmentation results. Experiments revealed that the presented fusion algorithm was able to realize 2.102-4.066% higher average accuracy rate than the traditional algorithms and also enhanced efficiency.

• 한국멀티미디어학회논문지
• /
• 제14권8호
• /
• pp.992-999
• /
• 2011

This paper proposed a human body posture recognition program based on haar-like feature and hand activity detection. Its distinguishing features are the combination of face detection and motion detection. Firstly, the program uses the haar-like feature face detection to receive the location of human face. The haar-like feature is provided with the advantages of speed. It means the less amount of calculation the haar-like feature can exclude a large number of interference, and it can discriminate human face more accurately, and achieve the face position. Then the program uses the frame subtraction to achieve the position of human body motion. This method is provided with good performance of the motion detection. Afterwards, the program recognises the human body motion by calculating the relationship of the face position with the position of human body motion contour. By the test, we know that the recognition rate of this algorithm is more than 92%. The results show that, this algorithm can achieve the result quickly, and guarantee the exactitude of the result.

• 한국의류산업학회지
• /
• 제12권5호
• /
• pp.582-590
• /
• 2010

Garment design needs an iterative manipulation of 2D patterns to generate a final sloper. Traditionally there have been two kinds of design methodologies such as the flat pattern method and the pattern draping method. But today, it is possible to combine the advantages from the two methods due to the realistic cloth simulation techniques. We devised a new garment design system which starts from 3D initial drape simulation result and then modifies the garment by editing the 2D flat patterns synchronously. With this interactive methodology using real-time pattern deformation technique, the designer can freely change a pattern shape by watching its 3D outlook in real-time. Also the final garment data were given relative coordinates with respect to the human anthropometric feature points detected by an automatic body feature detection algorithm. Using the relative human body coordinate system, the final garments can be re-used to an arbitrary body data without repositioning in the drape simulation. A female shirt was used for an example and a 3D body scan data was used for an illustration of the feature point detection algorithm.

• 전자공학회논문지
• /
• 제51권11호
• /
• pp.181-186
• /
• 2014

본 논문에서는 보행자 상반신 검출기의 성능을 향상하기 위한 세그먼테이션에 기반한 특징 추출 방법을 제안한다. 상반신의 부분별 색상 분포를 활용한 멀티 파트 컬러 세그먼테이션을 사용하여 국소 특징이 갖는 한계로 인해 발생하는 오검출의 감소에 효과적인 "전역적" 윤곽 특징을 추출한다. 컬러 공간과 히스토그램 분해도에 따른 성능을 분석하였으며, 자체 구축한 보행자 상반신 영상을 사용한 실험을 통해서 제안한 방법으로 추출한 특징이 국소 특징 기반 검출기의 오검출 감소에 효과적임을 확인하였다.

• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2005년도 6th 2005 International Conference on Computers, Communications and System
• /
• pp.17-20
• /
• 2005

In this work, we compared several feature selection methods in the field of spam mail filtering. The proposed fuzzy inference method outperforms information gain and chi squared test methods as a feature selection method in terms of error rate. In the case of junk mails, since the mail body has little text information, it provides insufficient hints to distinguish spam mails from legitimate ones. To address this problem, we follow hyperlinks contained in the email body, fetch contents of a remote web page, and extract hints from both original email body and fetched web pages. A two-phase approach is applied to filter spam mails in which definite hint is used first, and then less definite textual information is used. In our experiment, the proposed two-phase method achieved an improvement of recall by 32.4% on the average over the $1^{st}$ phase or the $2^{nd}$ phase only works.

• 전기학회논문지
• /
• 제57권1호
• /
• pp.121-127
• /
• 2008

In this paper, we propose a new 3-D working point determination method for industrial robot using vision camera system and block interpolation technique with feature points in a vehicle body. To detect the feature points in a vehicle body, we applied the pattern matching method. For determination of working point, we applied block interpolation method. The block consists of 3-D type blocks with detected feature points per section. 3-D position is selected by Euclidean distance between 245 feature values and an acquired feature point. In order to evaluate the proposed algorithm, experiments are performed in glass equipment process in real industrial vehicle assembly line.

• 한국멀티미디어학회논문지
• /
• 제21권7호
• /
• pp.755-763
• /
• 2018

In this paper, for recognize a night pedestrian from an infrared video, a new method differentiated from the existing feature vector is proposed and experimented. The new approach focuses on the shape feature vector of the structure and shape of the pedestrian image divided by the human body seven split ratio. The pedestrian images are divided into 7 square blocks from the still image of the preprocessing process. And to reduce the dimension, the square block is converted into a mosaic block. The scalar and direction of the shape feature vector is calculated by the brightness and position of the element in the mosaic. For practicality of infrared video system, the proposed method simplifies the data to be processed by reducing the amount of data in the preprocessing in order to continuously batch process the entire system in real time. Through the experiments, we verified the validity of the proposed shape feature vector. In comparison to the existing method, we propose a new shape feature vector generation method as the feature vector for night pedestrian recognition.

• 사상체질의학회지
• /
• 제20권1호
• /
• pp.42-47
• /
• 2008

1. Objectives The Body Shape and Feature is one of the important standard for classification of Sasang Constitutions. In order to evaluate one's Body Shape and Feature objectively we have been developing the Body Measuring Machine. Now we develop the 3D Automatic Body Measuring Machine(3D-ABMM). So we make an analysis of the 3D-ABMM's Accuracy. 2. Methods By using the 3D-ABMM and Vivid 9i(3D laser scanner, Konica Minolta) we have a surface scan of the three objects which are the upper body of the female and male Manikin and a male model. We overlap each scan data using the RapidForm2006 (3D scan data solution, INUS Technology) and calculate the average distance and standard deviation between the same point of each scan data. 3. Results and Conclusions In the female Manikin, the average distance is 0.84mm and the standard deviation is 1.16mm and the maximum distance is 10.68mm. In the male Manikin, the average distance is 1.12mm and the standard deviation is 1.19mm and the maximum distance is 12.00mm. In the male model, the average distance is 3.26mm and the standard deviation is 2.59mm and the maximum distance is 12.75mm. From the results, 3D-ABMM has good accuracy for scanning body and will be a usable hardware of the 3D Automatic Body Analysis Machine.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권11호
• /
• pp.2824-2838
• /
• 2013

There has been a lot of attention paid recently to analyze dynamic human gestures that vary over time. Most attention to dynamic gestures concerns with spatio-temporal features, as compared to analyzing each frame of gestures separately. For accurate dynamic gesture recognition, motion feature extraction algorithms need to find representative features that uniquely identify time-varying gestures. This paper proposes a new feature-extraction algorithm using temporal self-similarity based on a hierarchical human model. Because a conventional temporal self-similarity method computes a whole movement among the continuous frames, the conventional temporal self-similarity method cannot recognize different gestures with the same amount of movement. The proposed model-based temporal self-similarity method groups body parts of a hierarchical model into several sets and calculates movements for each set. While recognition results can depend on how the sets are made, the best way to find optimal sets is to separate frequently used body parts from less-used body parts. Then, we apply a multiclass support vector machine whose optimization algorithm is based on structural support vector machines. In this paper, the effectiveness of the proposed feature extraction algorithm is demonstrated in an application for taebo gesture recognition. We show that the model-based temporal self-similarity method can overcome the shortcomings of the conventional temporal self-similarity method and the recognition results of the model-based method are superior to that of the conventional method.