• The Research Journal of the Costume Culture
• /
• v.14 no.3 s.62
• /
• pp.434-442
• /
• 2006

The purpose of this study was to develop the beautiful basic bodice pattern that satisfied both functionality and aesthetics on the basis of the change in the figure and length of surface body for each movement through a three-dimensional development figure of surface body for young women (aged between 18 and 24) who were very sensitive to fitness of clothes. Existing three basic bodice patterns (Yim wonja-, ESMOD-, and FIT-types) were selected and then compared and analyzed in terms of drawing methods and the wearing test was carried out by a sensory test in order to design an experimental prototype. The design of study prototype was improved by three wearing test that was correlated with low satisfactory item. And the ease was established by difference of previous direct measurement and body surface measurement.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.9 no.1
• /
• pp.37-46
• /
• 1985

The study is undertaken to utilize the computer in pattern making for women. The automation by the use of computer provides the higher accuracy and efficiency in pattern making. GIGI Graphic Terminal is used for pattern making. The results are as follows: 1. Basic points which can be connected to depict basic pattern are represented on the X-Y co-ordinates. 2. Body measurements for bodice and sleeve pattern are as follows: For bodice pattern: center back waist length, bust girth, and shoulder width. For sleeve pattern: arm hole length, wrist girth, and sleeve length. 3. Grading of standard size was accomplished by using same method.

• Journal of the Korean Home Economics Association
• /
• v.20 no.2
• /
• pp.73-84
• /
• 1982

The purpose of this study was to develop a basic bodice pattern and establish standards regrading to the size and grading of Korean misses' measurements in order to provide modern data for the ready-to-wear garment industry. 222 girls, aged from 18 to 27, were measured on 19 items of their structure. Mean, standard deviation, coefficient of variance, maximum, minimum, range and correlation coefficient between each items were analized. The analysis revealed the following significant results. The fundamental difference data of the bodice pattern and grading measurements between the year of 1975 and 1981 were as follow. (1) The measurements of bust and center back were used as a foundation to establish a standard size and grading. (2) Ranges of the bust circumference measurements were increased. Thus the sizes ere classfied into 5 groups. (3) The ease of bust circumference was increased due to the increasement of shoulder width. (4) The increase of the upper arm resulted to lower the bust line. (5) The shoulder slopes were higher than 1975. Therefore, the basic measurements of the shoulder slopes were reduced. (6) In spite of the front neck measurements were not changed, the back measurements were requied to increase. (7) the center front length became much shorter in the contrast with the increase of the center back length.

• Fashion & Textile Research Journal
• /
• v.23 no.5
• /
• pp.634-644
• /
• 2021

This study aims to propose various ways to utilize CLO, which focuses mainly on the production of 3D virtual samples, by comparing it with the pattern drafting functions of Four apparel CAD experts, who have teaching experience in YUKA and CLO, participated in a focus group interview, and a basic bodice prototype drafting was carried out by each participant to evaluate the pattern drafting functions of YUKA and CLO. The result of this study showed that the pattern drafting tools of YUKA are subdivided since YUKA is a CAD tool inherently specialized in pattern making. Though CLO provided a relatively limited pattern drafting menu compared to YUKA, it was found that pattern drafting could be accomplished with the help of supplementary tools and functions. This finding suggests that each CAD offers the corresponding tools for the same use of menus or functions in the prototype drafting process. The major difference between YUKA and CLO is that YUKA defines the pattern area by a set of line segments, whereas CLO utilizes an outline composed of closed curves. YUKA provides various specific tools according to the options such as angles, straight lines, and curves, while CLO produces the same results using combinations of a limited number of tools. Compared with YUKA, the advantage of CLO is its user-friendly task environment such as the Windows-based user interface, from the usability perspective. This study concludes that pattern drafting education using CLO would help not only industrial 3D design practitioners but also pattern education in academia

• The Korean Journal of Community Living Science
• /
• v.20 no.4
• /
• pp.571-578
• /
• 2009

This study was to apply the measurement variations of each region of the body to the basic bodice pattern grading and to provide the clothing pattern fit for the human body. Grading variation used in the apparel industry was researched and new grading variation was proposed by analyzing the statistical data of body measurements. The statistical variation in body measurements was applied to set the optimum grading region and variation. Five sizes were used by split grading method and drawn with Bust Circumference and waist length based on the middle size. Differences between the grading pattern and the drawing pattern were analyzed by overlapping them and measuring each region. The measurement variations of drawing patterns between the sizes were very different from those of statistical data. On the other hand, the measurement variations of grading patterns between the sizes and those of statistical data were similar. In summary, the grading pattern by applying the measurement variations to the region of the body was superior to the drawing pattern drawn by the basic measurements for clothing fitness.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.11
• /
• pp.1627-1637
• /
• 2002

The objective of this study is to analyze the images of basic bodice apparel displayed on the PC monitor connected to digital camera, and to suggest a more efficient alternative method that enables the expert judge to evaluate the subject both traditional method and displayed images on the computer. Appearance evaluation has traditionally been assessed using subjective method dependent upon expertjudges' senses with the naked eye after direct observation of a living model. This research faces the new challenge focusing on the sensory evaluation of appearance for basic apparel patterns, which can overcome the space and time limitations of the traditional feet methods. A total fifteen basic bodice garment (3 types of $pattern\;{\times}\;5$ subject) were constructed with same fabrics. The appearance evaluation items consist of lg questions of upper torso. The image takes font, back and side view of the dressed subject with three different situations. Data was analyzed using percentiles, standard deviation T-test and ANOVA. Taken together, the present result of appearance evaluation through digital camera image shows that there is a significant difference ($p{\leq}.001$) in the response to the placement of the neckline, the waist & shoulder dart, the general ease of the bust & waist area, the side seam, the perpendicular of the waist hem and general acceptability between the above three different situations; the image in the condition of greenish yellow background with front light showed the highest score through all questions. These results depend on the kind of background colors with the light.

• Journal of the Korean Society of Costume
• /
• v.45
• /
• pp.17-28
• /
• 1999

This study was to analyze factors of the body form and factors of bodice pattern through a surface developement figure for the tight bodice pattern design. Fifty replicas of the trunk surface were made by applying a surgical tape method of female subjects between 18 and 24 years old. The result was as follows: 1. The gaps between direct measurements and measurements of the surface development figure were regarded as allowances for the tight bodice pattern. 2. There are four factors of body form selected by factor analysis. The 1st factor signifies th degree of fatness in the upper body. The 2nd factor signifies the length of the upper body. The 3rd factor signifies the part of the front shoulder. The 4th factor signifies the part of the neck. 3. There are high correlations between center back line of the surface development figure and back length line side line front length line back neck depth back upper chest depth. There are high correlations between back bust line of the surface development figure and back interscye breadth line back upper chest line back armhole line. There are high correlations between front bust line of the surface development figure and front upper chest line front interscye breadth line front armhole line front neck breadth 4. The regression expressions of measurements of the surface development figure of the upper body were analyzed as(Fig. 3).

• Korean Journal of Human Ecology
• /
• v.4 no.1
• /
• pp.75-83
• /
• 1995

A pregnant woman usually brings on a great change of her body line after the six month pregnant time. In particular, the abdomen is the biggest of all body parts, in the latter of her pregnance, compared with the fact of the bosom is as such for the common body line. Accordingly, we have the 10 main item to design a pregnant woman's proper pattern by the Body Volume Pre-Outline. The pregnent woman's bodice basic pattern of this study is designed loosely for hiding the change of body as the progress of pregnance, in order to be applied to a pregnant woman's pattern design variously.

• Fashion & Textile Research Journal
• /
• v.8 no.5
• /
• pp.552-561
• /
• 2006

This study was conducted to suggest an appropriate jacket bodice pattern for elderly women by comparing the developed pattern with existing ready-made jacket pattern. The developed jacket bodice pattern was produced from the basic sloper in which elderly women's somatotype was fully reflected, by using the newly developed 3D pattern design system. Subjects were 6 elderly women aged from 60 to 69 who have average somatotype in their age group. This study carried out pattern analysis and self-sensory test with three ready-made jackets(national brands) and suggested a developed jacket pattern based on the results. According to the self sensory test results of ready-made jacket, wearing fitness among brands was significantly different even though those brands were same B91 size. The results of ready-made jackets' pattern analysis, size differences among patterns have influenced wearing fitness. The basic numerical formula for the jacket pattern considered elderly women's somatotype were as follows; $B/4+2{\pm}0.2{\sim}0.5$(difference of front and back), $W/4+2{\pm}0.2{\sim}0.5$(difference of front and back), H/4+2~7(ease amount), armhole depth B/4, chest width B/6+1, back width B/6+3 and back neck width B/12+0.5. According to the results of the developed jacket's appearance evaluation, it earned higher scores in silhouette and ease amount, confirming that the developed jacket is appropriate for the elderly women. Also, in the evaluation on space length, the developed jacket pattern was evaluated to allow proper space length in all around of measurement parts.

• Fashion & Textile Research Journal
• /
• v.20 no.6
• /
• pp.713-721
• /
• 2018

This study aimed to develop a draping manual for the basic bodice to be available in colleges and industries. For this, draping methods mentioned in six different textbooks were comparatively analyzed. As for the research method, draping methods were compared by using training textbook, and basic bodices designed with muslin were assessed using the 5-point Likert scale. First, the draping methods of basic bodices were comparatively analyzed. The main baselines were set as the center front line, the center back line, the bust line, and the shoulder blade line. The position of dart was suggested based on the princess line, in both the front and the back. The value of dart was classified as a fixed size with any associated excess. The length of dart was set based on the bust point and shoulder blade point or a fixed size. The amount of ease was randomly set based on the fixed size, bust circumference, waist circumference, interscye length, armholes and shoulder lines, or the worker's intuition. Second, according to the appearance evaluation of the patterns, the following patterns obtained the highest scores: A pattern 2.5cm away from the B.P point of the waist dart and shoulder dart in the frontal appearance, a pattern of 0.6~0.7cm ease for the front armhole, a pattern with an ease of 1.2cm in the bust and 0.6cm in the waist. As for back appearance, the pattern in which the point of waist dart is 2~3cm from the bust line received the highest score.