• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.2
• /
• pp.138-145
• /
• 2007

Luminous traffic safety mark is restricted to use only the place that has a thick fog, many night traffic accidents, limited field of view due to structure of road. Recently, LEDs are used for luminous traffic safety mark, but we propose an organic LED for a novel luminous traffic safety mark in the near future. The device structure was $ITO/2-TNATA(500{\AA})/{\alpha}-NPD(200{\AA})/DPVBi(300{\AA})/BCP(10{\AA})/Alq_3(200{\AA})/LiF(10{\AA})/Al:Li(1000{\AA})$. The characteristics of the device are most efficient on occasion of using $N_2$ gas plasma treatment. Current density is $240.71mA/cm^2$ luminance $10,550cd/m^2$, and current efficiency 3.53cd/A at an applied voltage of 10V. The maximum EL wavelength of the fabricated blue organic light-emitting device is 456nm. CIE color coordinates are x=0.1449 and y=0.1633, which is similar to NTSC deep-blue color with CIE color coordinates of x=0.14 and y=0.08.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.1
• /
• pp.22-30
• /
• 2015

Currently, in South Korea, 'Light Pollution Prevention Act by Artificial Lighting' has been enforced. For advertising lighting, it is limited based on only the light-emitting luminance. Luminance is a concept related to the glare. Not only the luminance of the light source, but also glare is affected depending on some situations like blinking, luminance contrast, background illuminance. This study conducted glare subjective evaluation with brightness, color, and blinking by looking at the LED lighting box. The results showed that the glare indexes were higher about 2 times in a decrease of background illuminance from 100lx to 0lx. The glare index of R, G, B light was higher than that of white light. The average glare index of the blue light was higher about 8 times compared to 2,700K. And the blink rate had little effect on the glare, but it affected the irritation. Therefore, the glare effect of light color and blinking needs to be considered for the standard of luminous environment.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.12
• /
• pp.38-46
• /
• 2010

For the development of 100[W] stage lighting, quantitative and uniform color mixing that applied through color adopted Simple-Inverse matching so that color mixing can be possible along Black Body Locus. R,G,B(Red, Green, Blue) LED(Light Emitting Diode) arrangement through LED package character analysis, LED module, and the characteristic of device were considered for uniform color mixing. A distance changeable optical device was built to assure high uniformity and high diffusion of not only the middle of diffusion side but also the border side. Also, we developed the control power circuit that can expand up to 6 channels which are possible for quantitative color mixing, and the high uniformity and high quantified border light for color mixing control and the verification of color mixing characteristics by composing GUI(Graphical user interface) including color mixing simulator. By presenting the experimental results of light color control, we proved the usefulness of our developed border light and the proposed color mixing method.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.6
• /
• pp.1227-1232
• /
• 2017

In this study, we have studied a system to reduce the inconvenience and the accident rate at the intersection when the visually impaired use traffic information by using pressure sensor and ultrasonic sensor. By using the pressure sensor to light the strip LED, the driver recognizes the pedestrian, thereby reducing the accident rate. In addition to the pedestrian signal light information, the ultrasonic sensor and Bluetooth transmit the bus position information to the application so that the user can listen to the voice.

• Journal of the Optical Society of Korea
• /
• v.16 no.4
• /
• pp.449-456
• /
• 2012

For two well-known modulation methods, stepwise current modulation (SCM) and pulse width modulation (PWM), the effects of driving current modulation conditions on chromaticity were experimentally investigated in a white LED lighting system. For the experimental implementation of both SCM and PWM, a white LED lighting was fabricated using phosphor converted (PC) white light emitting diodes (LEDs) and a driving circuit module was developed. By using them, the variations of illuminance, color coordinates, and spectrum were evaluated under various forward current conditions. Through the analysis in color coordinates, yellow shift in SCM and blue shift in PWM were observed on chromaticity diagrams with increasing average driving current. In addition, in order to analyze color deviation quantitatively, color distance before and after current increase, and the correlated color temperature (CCT) were calculated. As a result, for the white LED lighting in both modulation conditions, the maximum difference in the calculated CCT was obtained close to 1000 K. It means that careful consideration is required to be taken in the design of illumination systems to avoid serious problems such industrial accidents.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.4
• /
• pp.37-41
• /
• 2018

$Y_3A_{l5}O_{12}:Ce^{3+},Pr^{3+}$ single crystal phosphor was prepared by floating zone method. single crystal was confirmed to have a Ia-3d (230) space group of cubic structure and showed regular morphology. The optical properties, single crystal exhibited a emission band from green, yellow wide wavelength and 610nm, 640nm red wavelength vicinity. The luminance maintenance rate was decreased by phonon with increasing temperature, but high luminance is maintained more than powder phosphor. In addition, $Y_3A_{l5}O_{12}:Ce^{3+},Pr^{3+}$ single crystal phosphor was applied to a high power blue laser diode, we implemented high power white laser lightings. and it was confirmed that thermal properties over time, due to the effective heat transfer of complete crystal structure. We confirmed that excellent radiant heat properties than powder phosphor was applied to a high power white laser diode.

• Food Science and Preservation
• /
• v.19 no.3
• /
• pp.354-360
• /
• 2012

The effect of the wavelength of the light emitted by the light-emitting diode (LED) on the growth characteristics and physicochemical and sensory qualities of Pleurotus eryngii were investigated. Pleurotus eryngii were grown under different light sources: blue light (450 nm), red light (650 nm), green light (525 nm), UV-A (365 nm), and mixed light ($B^*R$, $B^*G$, $R^*G$, $B^*R^*G^*UV-A$). The quantity of LED light was set up at 50% (LED: 64.9-108.0 $pmolm-2{\cdot}s-1$;fluorescentlight:11.7lux). Fluorescent light was used as control. There were no significant differences in the flesh firmness. In the case of the Pleurotuseryngii cultivated under red, green, and mixed light ($R^*G$), the color of the pileus and the length of the stipe were similar to those of the control group. The sensory scores were not significantly different between the LED lights (red, green, and $R^*G$) and the control. Among the three LED light conditions, the sample cultivated under red light recorded the highest score. The samples under UV-A, blue, and mixed light ($B^*R$, $B^*G$, $B^*R^*G^*U$) had a dark pileus color and had a short stipe. These results showed that the wavelength of LED light affected the growth and quality characteristics of Pleurotus eryngii, and that using red LED light is preferable for the cultivation of Pleurotus eryngii with better quality.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.5
• /
• pp.324-329
• /
• 2018

Red phosphor in glasses (PiGs) for automotive light-emitting diode (LED) applications were fabricated with 620-nm $CaAlSiN_3:Eu^{2+}$ phosphor and Pb-free silicate glass. PiGs were synthesized and mounted on high-power blue LED to make a monochromatic red LED. PiGs were simple mixtures of red phosphor and transparent glass powder. After being fabricated with uniaxial press and CIP at 300 MPa for 20 min, the green bodies were thermally treated at $550^{\circ}C$ for 30 min to produce high dense PiGs. As the phosphor content increased, the density of the sintered body decreased and PiGs containing 30% phosphor had a full sintered density. Changes in photoluminescence spectra and color coordination were studied by varying the thickness of plates that were mounted after optical polishing. As a result of the optical spectrum and color coordinates, PiG plate with $210{\mu}m$ thickness showed a color purity of 99.7%. In order to evaluate the thermal stability, the thermal quenching characteristics were measured at temperatures of $30{\sim}150^{\circ}C$. The results showed that the red PIG plates were 30% more thermally stable compared to the AlGaInP red chip.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.9
• /
• pp.755-758
• /
• 2012

We developed a new solar simulator to evaluate a large-scale solar cell using seven kinds of LEDs (Infrared, Red, Yellow, Green, Blue, White and Ultra Violet LED). LED solar simulator can be displaced the existing solar simulator which has several demerits such as high power consumption and short lifetime. We have tried to fabricate LED solar simulator which fulfills the spectrum for AM 1.5G condition, and to verify the feasibility of LED solar simulator.

• Korean Journal of Environmental Agriculture
• /
• v.37 no.2
• /
• pp.79-86
• /
• 2018

BACKGROUND: Chinese cabbage biosynthesizes various phytochemicals including carotenoids and glucosinolates. Environmental stress has a major effect on the growth and yields of vegetables, and can significantly affect nutritionally important phytochemicals. Phytochemicals of plants are influenced by light, temperature, carbon dioxide, and growing conditions. The aim of this study was to investigate the effect of various light sources on carotenoid and glucosinolate contents in Chinese cabbage. METHODS AND RESULTS: [Experiment I] Set the control (field control, FC) on the ground. Using acrylic sunlight, experiments were set up transparency box (field transparency, FT), red box (field red, FR) and blue box (field blue, FB). [Experiment II] Set the control (chamber control, CC) in the greenhouse. Using plant growth chamber with artificial light, experiments were set up LED red (chamber red, CR), LED blue (chamber blue, CB), LED mixed red+blue (chamber red+blue, CRB) and fluorescent (chamber fluorescent, CF). After plant growth, Chinese cabbage was harvested at 110 days after sowing (DAS). The status of plants growth (leaf length, width, fresh weight etc.) was immediately investigated. Carotenoid and GSL contents were analyzed by HPLC. [Experiment I] Results documented that the ranges of total carotenoid contents were 25.39 ~ 58.80 mg/kg dry wt for lutein, 0.84~ 4.22 mg/kg dry wt for zeaxanthin, and 3.85~18.71 mg/kg dry wt for ${\beta}$-carotene. Lutein was the highest for the content and the largest for the variation as well. [Experiment II] Results documented that the ranges of total carotenoid contents were 24.66~137.96 for lutein, 2.51~20.65 for zeaxanthin, and 8.40~49.80 mg/kg dry wt for ${\beta}$-carotene. The total carotenoid contents of CR (156.62) and CB (115.90) were 1.6~2.3 times larger than the other treatments, and ${\beta}$-carotene content was about twice as high as that of the other treatments on the CR (38.74 mg/kg dry wt.). [Experiment I] Total GSL content was the highest in FT (19.76) that was higher 1.7 times than the lowest treatment ($11.39{\mu}mol/g\;dry\;wt$.). [Experiment II] The total content of GSL was highest in CRB (4.19) and lowest in CF ($2.88{\mu}mol/g\;dry\;wt$.). In the CRB, total GSL contents ($4.19{\mu}mol/g\;dry\;wt$.) was the highest. CONCLUSION: Total and individual carotenoid and GSL contents in Chinese cabbage show significant differences under different light sources. Red and blue lights contribute to significant carotenoids expression and antioxidant activity for nutrition and health benefits. These results concluded that the introduction of varying lights affected the synthesis of important nutrient compounds in Chinese cabbage. It is predicted that the application of good light source enhances the accumulation of functional compounds.