• Proceedings of the IEEK Conference
• /
• 2001.06d
• /
• pp.53-56
• /
• 2001

This paper presents a computationally efficient post-processing algorithm for HDTV. The proposed algorithm can reduce both blocking artifacts and mosquito noise while preserving the sharpness and naturalness of the reconstructed video signal. Performance improvements compared with other techniques are obtained according to simulation results.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.1247-1252
• /
• 2004

ATC(Automatic Train Control) system employed in Bundang urban transit is operated in accordance with automatic blocking equipment. Using AF(Audio Frequency) track circuits installed at a block section, the block signal is automatically controlled and the safety of train operation is supported. In this paper, we investigate the operation mode of bundang urban transit and analyze the operation algorithm of ATC on-board system.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.05a
• /
• pp.687-690
• /
• 2004

본 논문에서는 음란유해콘텐츠를 기술적으로 차단하기 위해 신호처리 기법에 기반한 방법을 제안하고자 한다. 지금까지의 기술적인 방법 등이 목록기반과 단어기반에 기초한 방법이기 때문에 음란콘텐츠가 제대로 차단이 되지 않은 경우가 많았다. 이를 위해 본 논문에서는 신호처리에 기반하여 음란 유해 콘텐츠를 차단하는 방법을 제안하고자 한다. 끝으로 실험에 의해 제안한 방법의 유용성을 입증하고자 한다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2013.06a
• /
• pp.315-318
• /
• 2013

A novel foveation filter method is proposed in DCT domain. For countering the blocking and ringing artifacts, we devise the tools measuring the signal gradient, the block signal variations in the DCT domain. Each measurement is properly applied to each enhancement region and smoothing region. The proposed method optimally adapts the enhancement factors to the characteristics of the underlying signals and so maximizes the enhancement performances with significantly suppressing the artifacts. The subjective and objective evaluations verify that the proposed method sustains producing the improved video qualities for various sequences without tuning any parameters to individual sequences.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.12
• /
• pp.2664-2673
• /
• 1997

The signal fading distortion has effect on the capacity of cellular mobile communication systems. The short term fading is solved by signal processing techniques depending on the radio communication methods, but another distortion compensation techniques are necessary to combat long term fading. in this paper, we have simulated the call processing in DS-CDMA system using distributed antennas to overcome the long term fading. From the simulation results, we have conformed that the blocking probability of a new call andthe forced probability of handoff-request-call have decreased by increasing the number of distributed antennas.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.6
• /
• pp.600-606
• /
• 1992

The series connection of power switching semiconductor elements is essential when a high voltage converter is made, so researches are being conducted to further develop this technology. In the series connection of power switching semiconductor elements, the main problem is that simultaneous conduction at turn-on and simultaneous blocking at turn-off together with voltage balancing are unattainable because of the difference of their switching characteristics. In this paper a novel series connection algorithm is proposed, which can implement not only the synchronization of the points of turn-on and turn-off time but the dynamic voltage balancing in spite of the difference of each switching characteristics. The proposed method is that the compensated control signal is attained from the voltage feedback signal and applied to the series-connected power transistors independently. Computer simulation and experimental results verify its validity.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.1
• /
• pp.15-20
• /
• 2002

The frame coding inside the screen for a video coder has a big influence on the quality of the whole frame. The standardized video coder uses DCT, however it can give rise to a low image quality due to the blocking effect at low bit rate. This paper proposes a video coding method for an image quality improvement in human visual aspects. With the proposed method, the perceptual weight is coded with SPIHT and VLC by applying it into the frame and the visual noises are eliminated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.957-966
• /
• 1998

In this paper an imrpoved Signal-to-Interference ratio(SIR)-based call admission control(CAC) algorithm for DS-CDMA cellular system is proposed and its performance is analyzed. This algorithm uses Residual-Capacity defined asthe additional number of initial calls that a base station can accept such that system-wide outage probability will guaranteed to remain below a certain level. the residual capcity at each cell is calculated according to the reverse-link SIR measured not only at the home cell but also the adjacent cells. Then the adjacent cell interference-coupling coefficient .betha. is used. In this work we propose an improved algorithm that .betha. varies according to the traffic load of the home cell. The influence of traffic condition on system performance, namely blocking probability and outage probability, is then examined via simulation. The performance of the improved algorithm is evaluated both under homogeneous and hot spot traffic loads. The results show that the improved algorithm outperforms conventional algorithms under all load values. Under over-load situation, especially, the improved algorithm gives almost constant outage performance the QoS(quality of service) can be guranted.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.1
• /
• pp.73-78
• /
• 2004

There are random, continuous, and periodic allocation methods in the time slot sequence integrity for the multi-slot call. In the T-S-T switch, there are 2 time switch and the 2*2 space switch. Three time-slot allocation methods are suggested for the simulation. In the simulation, the searching times for time-slots on a multi-slot call is chosen to 32, and the simulation time is chosen to 100,000 seconds. Three kinds of calls are supposed for a multi-slot call : one time-slot call, two time-slot call, and 6 time-slot call. In the simulation, the carried traffic and the blocking probability are calculated on the 3 different traffic cases of 8:1:1, 6:2:2, 4:3:3(one time-slot : two time-slot : 6 time-slot) multi slot calls. It is shown that the blocking probability for the periodic time slot allocation method is best. As a result, the periodic time-slot allocation method is the proper one for the multi-slot ATM switch.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.3
• /
• pp.1104-1111
• /
• 2014

The digital substations are being built based on the IEC 61850 network. The cooperation and protection of power system are becoming more intelligent and reliable in the environment of digital substation. This paper proposes a novel method to prevent the malfunction caused by the Transformer Magnetizing Inrush Current(TMIC) using the IEC 61850 based data sharing between the IEDs. To protect a main transformer, the current differential protection(87T) and over-current protection(50/51) are used generally. The 87T IED applies to the second harmonic blocking method to prevent the malfunction caused by the TMIC. However, the 50/51 IED may malfunction caused by the TMIC. To solve that problem, the proposed method uses a GOOSE inter-lock signal between two IEDs. The 87T IED transmits a blocking GOOSE signal to the 50/51 IED, when the TMIC is detected. The proposed method can make a cooperation of digital substation protection system more intelligent. To verify the performance of proposed method, this paper performs the real time test using the RTDS (Real Time Digital Simulator) test-bed. Using the RTDS, the power system transients are simulated, and the TMIC is generated. The performance of proposed method is verified in real-time using that actual current signals. The reaction of simulated power system responding to the operation of IEDs can be also confirmed.