• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.469.2-469.2
• /
• 2014

All-solid-state solar cell based on Chloride doped organometallic halide perovskite, (CH3NH3)PbIxCl3-x, has achieved a highly power conversion efficiency (PCE) to over 15% [1] and further improvements are expected up to 20% [2]. In this way, solar cells using novel light absorbing perovskite material are actively being studied as a next generation solar cells. However, making solution-process require high temperature up to $500^{\circ}C$ to form compact hole blocking layer and sinter the mesoporous oxide scaffold layer. Because of this high temperature process, fabrication of flexible solar cells on plastic substrate is still troubleshooting. In this study, we fabricated highly efficient flexible perovskite solar cells with PCE in excess of 11%. Atomic layer deposition (ALD) is used to deposit dense $TiO_2$ as hole blocking layer on ITO/PEN substrate. The all fabrication process is done at low temperature below $150^{\circ}C$. This work shows that one of the important blueprint for commercial use of perovskite solar cells.

• 한국전기전자재료학회논문지
• /
• 제17권1호
• /
• pp.83-88
• /
• 2004

BAlq was fabricated as for hole blocking layer in the OLED devices to investigate its electrical and optical characteristics. Device structure was ITO/$\alpha$ -NPD/EML/BAlq/Alq3/Al:Li using TYG-201, DPVBi (4, 4 - Bis (2, 2 - diphenylethen-1 - yls) - Biphenyl), Alq and DCJTB (4-(dicyanomethylene)-2- (1-propyls)6-methy 4H-pyrans) as green emitting material, blue emitting material, host material for red emission and red emitting guest material respectively. The OLED device showed optimum working voltage and electron density at 600 cd/$m^2$ when thickness of BAlq is 25$\AA$ for RGB OLED devices while their efficiencies are better at 50$\AA$ of BAlq. Red and blue color OLEDs also fabricated using 30$\AA$ thickness of BAlq and compared with those without BAlq layer. BAlq was more effective in electrical properties such as working voltage, current density and efficiency of red OLED than blue and green ones. This study describes that 30$\AA$ is optimum thickness of BAlq for best performance of full color OLED devices when using BAlq as a hole blocking material.

• Bulletin of the Korean Chemical Society
• /
• 제26권10호
• /
• pp.1569-1574
• /
• 2005

To develop new hole-blocking materials for phosphorescent organic light-emitting diodes (PhOLEDs), 5,6-dihydro-2,9-diisopropyl-4,7-diphenyl[1,10]phenanthroline (1) and 5,6-dihydro-2,9-diisopropyl-4-(4-methoxyphenyl)-7-phenyl[1,10]phenanthroline (2) were synthesized. While the absorption spectrum of 1 is very similar to that of 2, the photoluminescence spectrum of 1 has the feature of the narrower and blue-shifted blueviolet emission at the peak of 356 nm compared to that of 2. The HOMO and LUMO energy levels of 1 and 2 were estimated from the measurement of cyclic voltammetry, and 1 has the appropriate levels for a holeblocking layer (HBL). The use of 1 as a HBL in a green PhOLED led to good efficiency of 23.6 cd/A at 4.4 mA/$cm^2$.

• Current Optics and Photonics
• /
• 제4권4호
• /
• pp.380-390
• /
• 2020

In this study, the traditional electron-blocking layer (EBL) in (In,Ga)N/GaN light-emitting diodes is replaced by a circular EBL that is the same size as the n-pad. The three-dimensional (3D) nonlinear Poisson, drift-diffusion, and continuity equations are adopted to simulate current transport in the LED and its characteristics. The results indicate that the local carrier-density distribution obtained for the circular EBL design is more uniform than that for the traditional EBL design. This improves the uniformity of local radiative recombination and local internal quantum efficiency (IQE) at high injection levels, which leads to a higher lumped IQE and lower efficiency droop. With the circular EBL, the lumped IQE is higher in the outer active region and lower in the active region under the n-pad. Since most emissions from the active region under the n-pad are absorbed by the n-pad, obviously, an LED with a circular EBL will have a higher external quantum efficiency (EQE). The results also show that this LED works at lower applied voltages.

• 디지털산업정보학회논문지
• /
• 제15권1호
• /
• pp.53-59
• /
• 2019

As the number of harmful sites increases, many social problems are occurring. Therefore, in order to solve this problem, the government is carrying out activities to block access to web sites to harmful sites based on the law. However, due to the change from HTTP to HTTPS protocol, it has become difficult to block the harmful sites in the existing method. In the existing HTTP protocol, a method of blocking the site corresponding to the harmful site domain list by utilizing the DNS information was used. However, due to the generalization of HTTPS, it is difficult to block the harmful sites in the existing method. Therefore, the ISP uses the method of blocking the website using the SNI field in the TLS (Transport Layer Security) Handshake protocol used for HTTPS. However, since the method using SNI field raises the concern of monitoring Internet users or exposing information about connected sites, in this paper, we proposed method which can support anonymity to Internet users while blocking harmful sites. The suggested method also can support integrity and source authentication to the transmitted data.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1042-1045
• /
• 2006

The electrical and optical properties of electrophosphorescent organic light-emitting diodes (OLEDs) with modified hole blocking layer (HBL) were investigated. Well-known 2,9-dimethyl-4,7- diphenyl-1,10-phenanthroline (BCP) HBL is mixed with electrophosphorescent host material (4,4'-N,N'- dicarbazole-biphenyl: CBP) or electrophosphorescent dopant material (fac-tris(2-phenylpyridine) iridium: $Ir(ppy)_3$) or both. The highest external quantum efficiency was obtained in the device with $BCP-CBP-Ir(ppy)_3$ mixed HBL and we attribute this result to the additional charge recombination in mixed-HBL.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1294-1296
• /
• 2005

We have fabricated white organic light emitting diodes. To obtain balanced white emission and improve the efficiency of devices, thin electron blocking layer (TEBL) was inserted between the emitting layers. We showed that the effective injection of electrons through the optimization of TEBL (a - NPD) embodied the balance of spectra and had a possibility of getting white emission. In a device with 0.3 nm a-NPD, it had a maximum power efficiency of 3.80 lm/w at 250 $cd/m^2$, a luminance of 1200 $cd/m^2$ at 100 $mA/cm^2$ , and the CIE coordinates were (0.353, 0.357).

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.784-787
• /
• 2002

Oganic light emitting diodes (OLEDs) using PBD(2-(4-biphenylyl)-5-(4-tert-butylpheny)-1,3,4oxadiazole) as a hole blocking layer were fabricated and their device performances were investigated. The devices have a structure of glass substrate ${\setminus}$ indium tin oxide (ITO) ${\setminus}$ TPD(HTL)${\setminus}$PBD,BCP(HBL)${\setminus}$Alq3(EIL)${\setminus}$Mg:Ag(cathode). In this work Bathocuproine(BCP:2,9-Dimethyl-4,7-diphenyl-1,10-phenanthroline) and PBD which were previously known as a good ETL material were used as a HBL. By employing HBL, the luminance and quantum efficiency of OLEDs could be improved due to the increase of recombination probability of electrons and holes.

• Journal of Electrochemical Science and Technology
• /
• 제12권2호
• /
• pp.225-229
• /
• 2021

Commercially available continuous glucose sensors require the operation stability for more than two weeks. Typically, the sensor comprises a sensing layer and an over-coating layer for the stable operation inside the body. In the sensing layer, enzymes and mediators are cross-linked together for the effective sensing of the glucose. The over-coating layer limits the flux of glucose and works as a biocompatible layer to the body fluids. Here, we report the simple preparation of the flux-limiting layer by the condensation of polyethyleneimine (PEI), tri-epoxide linker, and trimethylolpropane triglycidyl ether (PTGE). The sensor is constructed by a layer-by-layer drop-coating of the sensing layer containing glucose dehydrogenase and the PEI-derived blocking layer. It is stable for more than 14 days, which is enough for the sensor in the continuous monitor glucose monitoring (CGM) system.

• 멤브레인
• /
• 제15권1호
• /
• pp.52-61
• /
• 2005

폴리에틸렌 정밀여과 모세관막을 이용한 벤토나이트 콜로이드 현탁액의 투과유속 감소특성을 검토하였다. 운전시간이 경과하면서 투과유속이 감소되는 원인은 막표면 위에서 케익층의 성장과 입자들에 의한 세공막힘 때문이었으며, 운전시간이 경과하여 정상상태에 도달하면 투과유속은 케익여과 모델에 의해 지배받는다. 운전압력이 높은 경우의 투과유속 감소는 세공막힘과 케익층이 치밀해졌기 때문이다. 운전압력이 증가함에 따라 J/J₁는 감소하였으며, 0.5 kg/sub f//㎠일 때의 45%, 2.0 kg/sub f//㎠일 때 38%로 감소하였다. 운전압력 0.5 kg/sub f//㎠에서 총 막오염에 대한 성분오염의 비율은 표준세공막힘 14.6%, 완전세공막힘 23.4% 그리고 케익여과 62.0% 이었다. 순환흐름속도의 증가로 인해 투과유속은 증가하였고, 그 효과는 운전압력이 1.0 kg/sub f//㎠일 때가 운전압력 2.0 kg/sub f//㎠ 경우보다 컸다. 세공크기가 0.34 ㎛인 막의 투과유속은 세공의 크기가 0.24 ㎛인 막보다 컸으며, 용액의 농도에 따른 투과유속은 농도가 낮은 용액이 컸다. 세공크기가 0.34 ㎛인 막의 막오염 형태는 유사하지만 농도가 200 ppm인 용액의 경우 1000 ppm인 용액에 비하여 상대적으로 미약한 세공막힘 현상을 보였다.