• 대한기계학회논문집B
• /
• 제20권8호
• /
• pp.2611-2625
• /
• 1996

A numerical method on multi-block technique by Bi-CGSTAB(Bi-Conjugate Gradient STABilized) solver has been proposed. The present multi-block technique can reduce the numerical manipulation greatly because the common regions at the interface of each block are not necessary. In order to test the computational performance of present multi-block technique, the flow characteristics in a T type duct system and a N type duct system have been investigated by three kinds of methods such as the single-block method, the previous multi-block technique and the multi-block technique with Bi-CGSTAB solver. The results indicated that the required CPU time by present multi block technique was shorter than that of other two numerical methods and the convergency history was shown very stable at the present multi-block technique.

• 한국정보전자통신기술학회논문지
• /
• 제12권3호
• /
• pp.186-191
• /
• 2019

본 논문은 고속 특징추출 알고리즘의 구현 방법을 제안한다. 제안하는 방법은 블록 유형 분류 알고리즘을 기반으로, 블록 유형 분류 알고리즘 적용 시, 영상 특징 정보가 발생하지 않는 스무스 블록에서 연산을 생략하여 영상 특징 검출에 필요한 연산시간을 감소시킬 수 있다. 200장의 표준 테스트 이미지를 활용해 매크로 블록의 크기를 $64{\times}64$로 나누어 스무스 블록의 발생 빈도를 측정한 결과 전체의 29.5%만큼 발생하는 것을 정량적으로 확인했다. 이 의미는 다양한 영상 정보를 포함하고 있는 표준 테스트 이미지 내에서는 29.5%에 해당하는 만큼 연산의 복잡도를 감소시킬 수 있다는 의미를 나타낸다. 제안된 방법을 케니 윤곽선 검출 알고리즘에 적용하면 이차원 미분 필터, 그라디언트 크기 및 방향 연산, 비최대 억제, 적응형 임계값 연산, 히스테리시스 임계 처리와 같은 총 다섯 단계의 영상처리에 필요한 지연시간을 완전히 제거할 수 있다. 이와 같은 방법으로 다양한 특징 검출 알고리즘에 블록 유형 구분 알고리즘을 적용해, 연산에 필요한 시간을 감소할 수 있을 것을 기대한다.

• 한국지형학회지
• /
• 제25권2호
• /
• pp.1-14
• /
• 2018

The main objective of this paper is to classify properties of the locational environment for each debris type by calculating likelihood ratio based on the correlation between the distributions for each type of debris landform. A total of 8 thematic maps, like as elevation, slope, aspect, curvature, topographic wetness index (TWI), soil drainage, geology, and landcover including with GIS spatial information generally used in this type of debris landform analysis. The results of this study showed that the block stream had a high likelihood ratio compared to talus in areas with relatively high elevation; and concerning slope, the block stream had a high likelihood ratio in a relatively low region than talus. Concerning aspect, a clear correlation could not be analyzed for each debristype, and concerning curvature, the block stream displayed a developed slope on the more concave valley than the talus. Analysis concerning TWI, the block stream displayed a higher likelihood ratio in wider sections than talus, and concerning soil drainage, the talus and block stream both displayed a high likelihood ratio in regions with well-drained soil. The talus displayed a high likelihood ratio in the order of metamorphic rocks, sedimentary rocks, and granite, while the block stream displayed a high likelihood ratio in the order of volcanic rocks, granite, and sedimentary rocks. In addition, concerning landcover, the likelihood ratio had the most concentrated distributed compared to natural bare land only concerning talus. Based on the likelihood ratio result, it can be used as basic data for extracting the possible areas of distribution for each debris type through the GIS spatial integration method.

• 한국음향학회지
• /
• 제13권4호
• /
• pp.5-11
• /
• 1994

본 논문에서는 형식별 블럭분할에 기초한 다중신경망과 퍼지추론에 의한 한글 형식분류에 대해 연구하였다. 효과적인 자모분류를 위해 입력문자에 대해서 한글의 각 형식을 구성하는 자모의 영역으로 분할하는 블럭분할방법을 제한하였으며, 분할된 블럭이 형식에 따라 적응적으로 변화할 수 있도록 하였다. 또한 분류율의 향상을 위해 전체신경망과 부분신경망으로 이루어진 다중신경망을 구성하였으며, 퍼지추론에 의해 한글 형식을 판정하였다. 비교, 실험을 통하여 제안된 방법의 타당성을 검증하였으며, $92.6\%$의 분류율을 나타내므로서 유효성을 확인하였다.

• 대한조선학회논문집
• /
• 제41권1호
• /
• pp.15-22
• /
• 2004

Twin-skeg type stern shapes are recently adopted for very large commercial ships. However it is difficult to apply a CFD system to a hull form having twin-skeg, since grid topology around a twin-skeg type stern is more complicated than that of a conventional single-screw ship, or of an open-shaft type twin-screw ship with center-skeg. In the present study a surface mesh generator and a multi-block field grid generation program have been developed for twin-skeg type stern. Furthermore, multi-block flow solvers are utilized for potential and viscous flow analysis around a twin-skeg type stern The present computational system is applied to a 15,000TEU container ship with twin-skeg to prove the applicability. Wave profiles and wake distribution are calculated using the developed flow analysis tools and the results are compared with towing tank measurements.

• 한국주거학회논문집
• /
• 제18권3호
• /
• pp.125-136
• /
• 2007

To improve the environment of individual residential area, the uniform development of multiple dwellings through site should be avoided. As an alternative to a large scale development of the currently popular high-density and high-rise apartment buildings, which disintegrates and destroys existing communities, a new residential type that is applicable to the individual residential area should be developed. From the new residential type, even for short history of Korea of modem urban residence, a new concept of residence can be formed, changing from the concept of a temporary staying place to the concept of a stable residing place. Also, a gradual improvement that transcends time can be expected, and the present and past appearances can co-exist. This study was conducted to suggest a new residential type with unit blocks that can improve the physical structure of existing individual residential area without destroying the structure. That is, among the factors that comprise the individual residential area, this study will focus on the unit block with a medium role between a site and a mega-block, and will suggest a new concept of residential unit in order not to destroy its physical structure. The physical characteristics of the unit block will also be analyzed.

• 한국농촌건축학회논문집
• /
• 제2권2호
• /
• pp.115-126
• /
• 2000

Retaining walls are used to prevent excessive movement of retained soils. Typical retaining walls include gravity, reinforced concrete, reinforced earth and tie-back. However, from a practical viewpoint there are still drawbacks among these often constructed retaining walls. New types of retaining walls constructed with precast concrete blocks are proposed. This type of retaining wall is incorporates each blocks interconnected with adjacent block by connecting unit to build up a flexible retaining-wall system. This paper focus to behavior characteristics includes deformation and distribution of lateral earth pressure by loading tests and FEM analysis. For model tests, a 1/10 scale reduce models are manufactured include unevenness part, drainage hole and connecting unit and steel wire used to connect each blocks with adjacent block. To simulate the real retaining walls closely, uneven parts are interconnected each other and the construction type of blocks and wall front inclination are varied to investigate the relative displacement of individual block and the location of maximum deformation of wall as increasing surcharging. Additionally, PENTAGON3D, which solve the geotechnical and other problem, used for verifying and comparing with model tests.

• 한국세라믹학회지
• /
• 제31권1호
• /
• pp.62-68
• /
• 1994

It is compared the structures of the S-block in the Ba-Co-Zn Y-type hexagonal ferrites (Ba2Co2-xZnxFe12O22, x=0~2) and the Co-Zn spinel ferrites (Co1-xZnxFe2O4, x=0~1) expressed by a hexagonal axis system (space group R3m). The structures have been refined with a Rietveld analysis of the powder X-ray diffraction pattern with high precision (Rwp<0.13, RI<0.03). The overal dimension of the S-block is slightly different from the 1/3 of a hexagonal spinel unit cell as follow: 1.6~2.0% longer c-axis, 1.3~1.6% shorter a-axis and about 1% smaller volume. Upto Zn:Co=1:1 in the Ba-Co-Zn Y-type hexagonal ferrites, the zinc substitute primarily the tetrahedral sites in the S-block. Beyond that the zinc seems to go into the T-block as well.

• The Korean Journal of Pain
• /
• 제7권1호
• /
• pp.49-52
• /
• 1994

Measurement of skin temperature is most frequently used to evaluate effect of sympathetic block. Sticker type skin temperature indicator, $ProChecker^{(R)}$, uses metamocolor, which changes the darkness of the color by giving and taking of electrons in response to temperature. We examined the accuracy of this skin temperature indicator in pain clinic patients who were treated with stellate ganglion block. Ten minutes before, and 10~20 minutes after stellate ganglion block, skin temperature on both dorsum of hand were measured using both $ProChecker^{(R)}$ and thermography concurrently. The results showed that skin temperature measured by $ProChecker^{(R)}$ was feasible, in correlation to thermography. Sticker type temperature indicator ($ProChecker^{(R)}$) is concluded as a useful monitor of skin temperature during nerve block in outpatient clinics.

• 한국실내디자인학회논문집
• /
• 제40호
• /
• pp.94-101
• /
• 2003

This study is mentioning about basic information and guide related block types, through a comparison and an analysis of floor types which is shown as function in block types and public interior spaces. For the range of this survey, it is defind in the beginning of 1970' s to the end of 1990' s which was rapidly developed in hotel industry and also is chosen by 12 places in the first class hotels. On the purpose of this study is written by designing the basic information of architectures, new hotels which are built and managed in urban, refer to the survey and analysis of the characteristic in hotel. The following is conclusion by based on pre-survey of the analysis of a plan and a site in these hotels. First, as a result of analysis in block type, there are equally distributed in three types (in-type, combination type, close-type), except a atrium type exception, in 12 hotels(100%). Second, as a result of analysis of function type in public interior space, Con-course type is consist of 7(58%), Hall type is 5(42%) in the type of room in public interior space, in 12 hotels(100%). Third, the type in lobby on space plan are equally shown by the type of lobby in center(4PL.), of lounge in center(4PL.), and a compromising type(4PL.).