• Journal of Advanced Navigation Technology
• /
• v.25 no.6
• /
• pp.498-509
• /
• 2021

The wake turbulence at the wingtip of preceding aircraft may affect the normal operation of following aircraft. Aircraft are classified into four categories according to their maximum take-off weight, and horizontal separation is applied with this category matrix. The FAA and EUROCONTROL revealed that the magnitude and effect of preceding aircraft wake turbulence were smaller than the current distance separation minima suggest. This new information presents the opportunity for revising wake turbulence minima into seven categories (RECAT). This paper confirms the feasibility of implementing RECAT at major airports in South Korea using the draft of ICAO Doc. 10122. The paper also calculates the ultimate runway capacity of Incheon International Airport in South Korea using the Harris Model and comparatively analyzes the amount of runway capacity. As a result of the analysis, it was confirmed that the implementation of RECAT could increase the ultimate runway capacity of Incheon International Airport. This paper's calculation methods and results can be used as primary data for implementing RECAT in other airports.

• Journal of Internet Computing and Services
• /
• v.21 no.1
• /
• pp.17-31
• /
• 2020

With the rapid development of block chain technology, attempts have been made to put the block chain technology into practical use in various fields such as finance and logistics, and also in the public sector where data integrity is very important. Defense Operations In addition, strengthening security and ensuring complete integrity of the command communication network is crucial for operational operation under the network-centered operational environment (NCOE). For this purpose, it is necessary to construct a command communication network applying the block chain network. However, the block chain technology up to now can not solve the security issues such as the 51% attack. In particular, the Practical Byzantine fault tolerance (PBFT) algorithm which is now widely used in blockchain, does not have a penalty factor for nodes that behave maliciously, and there is a problem of failure to make a consensus even if malicious nodes are more than 33% of all nodes. In this paper, we propose a Adaptive Consensus Bound PBFT (ACB-PBFT) algorithm that incorporates a penalty mechanism for anomalous behavior by combining the Trust model to improve the security of the PBFT, which is the main agreement algorithm of the blockchain.

• Journal of Navigation and Port Research
• /
• v.30 no.6 s.112
• /
• pp.457-464
• /
• 2006

Remarshalling operation is one of the operations considered important in an automated container terminal to perform quickly loading operations and delivery operations. It arranges the containers scattered at a verticla yard block in order to reduce the transfer time and the rehandling time of ATC(Automated Transfer Crane)s. This paper deals with the remarshalling planning problem minimizing the weighted operation time. This problem can be decomposed into 2 subproblems, storage space assignment problem and operation sequencing problem Storage space assignment problem decides to where containers are transported in terms of transportation time cost.. With results of a previous subproblem, operation sequence problem determines the ATC operation sequence, which minimizes the dead-heading of ATC This study formulates each subproblem with mixed integer program and dynamic program. To illustrate the proposed model, we propose an instance to explain the process of remarshalling planning.

• Journal of Navigation and Port Research
• /
• v.28 no.1
• /
• pp.59-67
• /
• 2004

As the environment for international logistics varies according to the globalization in world economy, world-class seaports are struggling for the position as strongholds in their own block. As a new government begins its own era in Korea, they are positively implementing their strategies at the level of government for making the Korean Peninsula the logistics centre in North-eastern Asia, marking the most of its geographic advantage. As one of those strategies, it plans to foster a specific area as an international logistics base camp in Northeast Asia by activating its logistics industry through inducing multinational logistics enterprises. In reality, however, in order for Busan seaport, the late-comer, to induce investment from the world-class multinational companies, a considerably large volume of investment should be given from both central and local governments. Accordingly, the objective of this study is to assess its competitiveness and to suggest an activation plan for BSDFA(Busan Seaport Duty-Free Area), based upon the results of on-the-spot interviews in China and Japan. The survey for the respondent's preference by way of Conjoint Analysis indicated that Investment procedures and limitations get the highest 36.2％ preference, so the most critical strategy to be considered for attracting enterprises into DFA(Duty-Free Area) is to solve the problems related to the investment procedures and limitations. The simulation analysis results for market share showed that UAE has the highest preference and BSDFA the lowest preference among the five countries. However, when the levels of investment procedures and limitations and production costare upgraded, the competitiveness of BSDFA was elevated next to that of UAE among the 5 countries. Thus, in order for BSDFA to obtain competitiveness, it is implied that production cost level as well as investment procedures and limitations level, should be lowered so that it could meet companies' demand.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.505-510
• /
• 2011

The railroad freight transport has great merits that can transport mass and specific items(dangerous goods), but it takes a long time because of low accessibility to the logistics facility and the complex process of loading freight in middle station. This paper analyzed volumes and characters of each railroad freight item, and was carried out the effect of applying E&S system to Gyeongbu line containers to find the method of reducing transport time and effective container transportation. As a result of Cost-Effectiveness analysis, the block train(B/T) is reducing transport time more about 1~2 hours. The road congestion cost is saving about 2.2 billion won. And due to skipping work of organizing train, personnel and equipment expenses savings expected about 9 billion won. It is expected that the E&S system enhances the container transport service and has an effect positive influence on making a efficient method of transport. But It is necessary to estimate pre-feasibility of applying E&S system that the standard of estimating cost and benefit is required further examination.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.28 no.1
• /
• pp.121-128
• /
• 2005

This paper proposes the heuristic approach for the generalized GT(Group Technology) problem to consider the restrictions which are given the number of cell, maximum number of machines and minimum number of machines. This approach is classified into two stages. In the first stage, we use the similarity coefficient method which is proposed and calculate the similarity values about each pair of all machines and align these values in descending order. If two machines which is selected is possible to link the each other on the edge of machine cell and they don't have zero similarity value, then we assign the machines to the machine cell. In the second stage, it is the course to form part families using proposed grouping efficacy. Finally, machine-part incidence matrix is realigned to block diagonal structure. The results of using the proposed approach are compared to the Modified p-median model.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.05a
• /
• pp.129-130
• /
• 2018

In shipping logistics, despite the fact that it has promoted the information processing process, the use of the document exchange mechanism has caused a problem of increasing the cost and lead time. In recent years, various types of projects are in progress in preparation for full-scale introduction of a blockchain technology capable of solving the document exchange mechanism in the shipping industry, In near future, by expanding the practical application scope, it is aiming to increase competitiveness through transparency, reliability, stability, and efficiency, which are the effects of application of the block chain technology.

• Journal of Navigation and Port Research
• /
• v.33 no.1
• /
• pp.79-90
• /
• 2009

The main function of a container terminal is to load container freights into vessels and discharge them from vessels. The container terminal needs to utilize its resources effectively in order to improve the productivity of it. This study deals with the deployment model for yard cranes whose type is RMGC (rail mounted gantry crane). We develop a mathematical model for the deployment of yard cranes. The model considers not only the deployment but also the storage plans. It could be divided into two cases according to whether inter-block movements of yard cranes are allowed or not, during the same period Numerical examples are solved and analyzed to validate the model. Then, additional experiments are performed to compare the performance of the model with that of a previous model without the re-deployment of yard cranes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.640-647
• /
• 2018

Many harbor structures have been constructed, and some structures are now under construction in Korea, which is a peninsular state and a logistics hub in Northeast Asia. Expansions and extensions of existing harbors are also being planned to meet increasing natural disaster threats. Wave-dissipation concrete blocks are recycled or discarded based on the personal experience of engineers only, and there are no safety checks or criteria. To check the safety of used blocks, material evaluations were done by visual inspection of blocks on the ground and under water and from 20 non-destructive measurements of the rebound hardness test and 3 concrete core samples. Wave-dissipation blocks are sometimes fully or partially damaged in the process of transferring and mounting them or during construction. Therefore, a safety check is essential for recycling blocks with an evaluation of materials while considering the construction phases. To do this, a block was modeled with a 3D finite element method using ADINA, and impact analyses were done according to the transfer, mounting, and construction phases. From the results of the impact analyses and material evaluation, the safety checks and reasonable evaluation of used blocks were examined, and detailed construction methods are proposed. The methods are expected to maximize the reuse of used wave-dissipation blocks from an economical point of view.

• Journal of the Korean Society for Railway
• /
• v.19 no.6
• /
• pp.833-843
• /
• 2016

Recently, in the field of rail freight transportation, the number of trains dedicated for shippers has been increasing. These dedicated trains, which run on the basis of a contract with shippers, had been restricted to the transportation of containers, or so called block trains. Nowadays, such commodities have extended to cement, hard coal, etc. Most full freight cars are transported by dedicated trains. But, for empty car distribution, the efficiency still remains questionable because the distribution plan is manually developed by dispatchers. In this study, we investigated distribution models delineated in the KTOCS system which was developed by KORAIL as well as mathematical models considered in the state-of-the-art. The models are based on optimization models, especially the network flow model. Here we suggest a new optimization model with a framework of the column generation approach. The master problem can be formulated into a transportation problem with additional constraints. The master problem is improved by adding a new edge between the supply node and the demand node; this edge can be found using a simple shorted path in the time-space network. Finally, we applied our algorithm to the Korean freight train network and were able to find the total number of empty car kilometers decreased.