• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.04a
• /
• pp.422-429
• /
• 1997

Thermal stress induced by hydration heat may produce cracks in mass concrete structure, which can result in structural problems as well as bad appearance. To minimize crack occurrence in massive structural, thus, the study put an emphasis on the determination of optimized lift height and block size. In the parametric study different sizes and lift heights were used to measure the magnitudes of hydration heat and thermal stresses for 3 different types of concrete fabricated with 1 pure cement and 2 blended Portland cements. As a result of analysis. it was found that magnitude of hydration heat and the occurrence of thermal cracks depend on the restriction conditions and material characteristics, especially adiabatic material parameters. It was also found that optimized lift height and block size can be determined from an appropriate combination of the degree of inner and outer structural restrictions.

• Journal of Korean Foot and Ankle Society
• /
• v.8 no.1
• /
• pp.101-106
• /
• 2004

Purpose: To determine the efficacy of the SDBBA (Subtalar distraction bone block arthrodesis) procedure on patients with late complication of intra-articular calcaneal fractures including subtalar joint arthritis and anterior ankle impingement syndrome. Materials and Methods: Five cases in which the SDBBA procedure was implemented were followed for more than one year. All five patients were male with an average age of 56. Clinically, the American Orthopedic Foot and Ankle Society (AOFAS) ankle-hindfoot score and the pain score were assessed. Radiographically, the talocalcaneal height and the talar inclination angle were determined. Results: All five patients achieved subtalar joint fusion. The average pre-operative AOFAS score was 22.8 scores (range, 8-32 scores). At last follow-up, these scores improved to an average of 72.4 scores (range, 64-82 scores). The average pre-operative pain score was 8.2 scores (range, 7-10 scores). At last follow-up, these scores improved to an average of 13.2 (range, 12-15 scores). The average pre-operative talocalcaneal height was 72.8 mm (range, 70-77 mm), average post-operative talocalcaneal height improved to 79.8 mm (range, 78-84 mm). At final follow-up, these measurement was slightly decreased to average 78.6 mm (range, 74-83 mm). The average pre-operative talar inclination angle was 13.2 degrees (range, 12-15 degrees), average post-operative talar inclination angle improvedto 19.2 degrees (range, 15-24 degrees). At final follow-up, these measurement was slightly decreased to average 18.6 degrees (range, 12-24 degrees). Four patients achieved successful outcomes. One patient developed a wound infection with subsequent sural neuropathy as well as collapse of the bone graft. Conclusion: This study shows that the SDBBA procedure successfully restores the talocalcaneal height and tibio-talar relationship. This procedure is useful in surgically managed patients with talo-calcaneal height loss and anterior ankle impingement syndrome due to the late complications of calcaneal intra-articular fractures.

• Korean Journal of Plant Resources
• /
• v.19 no.6
• /
• pp.677-679
• /
• 2006

The objectives of this study were to examine the genetic variation of 20-year-old tree height and to estimate heritabilities and genetic gains of Korean white pine. Analysis of variance showed that families and family x block interaction had the significant (p=0.01) effects on tree height. However, family variation appears to be much greater than the variation due to family x block interaction. Individual tree heritability was higher ($h_I^2=0.73$) than family heritability, ($h_F^2=0.83$) therefore, combined selection showed the largest genetic gain (17.76%) in a given equal intensity of selection.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.6
• /
• pp.27-37
• /
• 2019

This study focused on the possibility of reducing the cooling load through the change of micro climate in the outdoor space during summer season. This study proposes an efficient planning model by comparing the effects of urban heat island mitigation through wind path planning, outdoor space vegetation, and exterior material change by using the basic model of the street-oriented block housing proposed in the previous research by the same author. As a result, the most effective wind path planning strategy in the street-oriented block housing was the change of the air flow through the mass height adjustment. When the tall building masses were staggered and arranged in a balanced manner, the overall wind environment could be improved. The greater the height difference between low and high masses, the better the air flow was shown. It was also important to arrange the building masses so that the inlet of the main wind was open and to allow the external space to connect to the adjacent block to create a continuous flow. The change of outdoor space vegetation and flooring, and the formation of wind paths through the opening of lower part also showed the effect of heat island reduction. In addition, the change of PMV in summer was the biggest influence of shadow by tall building mass. Attention should be paid to the fact that high-albedo exterior materials are adversely affected by multiple reflections in dense street-oriented block housing. The use of albedo of the exterior material showed that it is necessary to pay attention to apply in the high density block housing. This is attributed to the rise of the temperature due to the absorption of energy into the low-albedo flooring, where the high-albedo exterior causes multiple reflections.

• The Korean Journal of Pain
• /
• v.13 no.1
• /
• pp.93-96
• /
• 2000

Background: Psoas compartment block with local anesthetics and corticosteroids is one of the treatments which provides long term analgesia of the lower back and anterior thigh unilaterally, and its technical easiness and safety allows blind application without C-arm guidance in the out-patient clinic. This study aimed to evaluate the mean of the depth from the skin to the psoas compartment, and its correlation to the following attributes: age, weight, height and PI (Ponderal Index). Methods: We investigated 28 patients who underwent psoas compartment block. All blocks were performed using Chayen's method (punctured at the point of 3 cm caudally and 5 cm laterally from the 4th lumbar vertebral spinous process) with a 22 G, 8 cm Tuohy needle under C-arm guidance. We recorded the depth from skin to the psoas compartment, height, weight and PI (weight (kg)/height (cm)$\times100$ (%)). Data were analyzed using the Pearson product-moment correlation coefficients. The correlations between the depth and other attributes identified by p-value of less than 0.05 were considered statistically significant. Results: The mean depths from skin to the psoas compartment were $6.02{\pm}0.28$ cm in men, $5.44{\pm}0.22$ cm in women. There is no significant correlation between the depth and other patient's attributes. Conclusions: The mean depths from skin to the psoas compartment may be one of the guide for psoas compartment block in outpatient clinics without C-arm guidance.

• Journal of Biosystems Engineering
• /
• v.41 no.1
• /
• pp.21-33
• /
• 2016

Purpose: In order to ensure that vegetable seedlings (with a soil block around their roots) are planted in an upright orientation after metering in a vegetable transplanter, they need to be dropped freely from a certain height. The walk-behind hand-tractor-powered machines do not have sufficient space to drop the seedlings from that height. In the present work, a hopper-type planting device was developed for the walk-behind hand-tractor-powered vegetable transplanter to ensure that the soil block seedlings are planted in an upright orientation. Methods: Various dimensionless terms were developed based on the dimensional analysis approach, and their effect on the planting of soil block seedlings in an upright orientation (planting efficiency) was studied. The optimum design dimensions of the hopper-type planting device were identified by the Taguchi method of optimization. Results: The ratio of the height of free fall to the sliding distance of the seedling on the surface of the hopper had the highest influence on planting efficiency. The planting efficiency was highest for plants with a height $15{\pm}2cm$. The plant handling Froude number, in interaction with the design of the hopper-type planting device, also significantly affected the planting efficiency. Of the hopper design factors, the length of the slide of the seedlings on the surface of the hopper was most important, and induced sufficient velocity and rotation to cause the seedling to fall in an upright orientation. An evaluation of the performance of the planting device under actual field conditions revealed that the planting efficiency of the developed planting device was more than 97.5%. Conclusions: As the seedlings were fed to the metering device manually, an increase in planting rate increased missed plantings. The planting device can be adopted for any vegetable transplanter in which the seedlings are allowed to drop freely from the metering device.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.6
• /
• pp.19-28
• /
• 2004

Segmental Retaining Wall(SRW) has been variously applying in Civil and Architecture construction. Recently, the application of environmental element in all type's structures came to essential requirement, and the construction cases of retaining wall using reinforced soil and block are more increased than the past. But, this trend more widely was spread environmental element as landscape work for the backside of reinforced retaining wall as well as block itself. New environmental block, Greenstone Block, developed to apply of this tendency. The retaining wall system using Greenstone can be environmental constructing at both block itself and backside of retaining wall. The material tests, the axial compressive strength test of block and bending test of fiber-pipe, exercised to design and construction of vertical SRW, which were satisfied NCMA standard. Through this procedure, Rewall (ver 1.0) was developed, which can be automation design of SRW including internal stability, external stability and local stability. And these can be considered setback of retaining wall, as well the examples of vertical retaining wall using block presented to satisfying the follows; strength of reinforced geotextile, height of retaining wall, surcharge, types of backfill and groundwater level etc. Many problems investigated on after or before of construction were due to local failure, insufficiency of bearing capacity and groundwater level. Especially, the local failure was many occurred to during compaction or after construction, and the cases of SRW construction is similar to the results of model test on vertical SRW.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.3 no.4
• /
• pp.1-10
• /
• 2000

This study aims at the new design system development of landscape architecture structures, as soundproof wall using reinforced soil block. This structures, that is new soundproof wall system, have to be maintained stability on acting critical wind load, which is combined exist soundproof wall system and soundproof wall system using environmental green stone block. To the harmony of this system, the post block, so-called landscape block or cast block, is manufactured. It's possible to stand of the post bearing system combined with post-pile and post block. Through the comparison with a serious code for the acting wind load on the soundproof wall, the reasonable wind load could be calculated. Also, the mechanical stability on the green stone block was checked by the Lab. tests based on the UBC (Uniformed Building Code). Because the critical height of soundproof wall system using green stone generally was restricted, the new system demands to combination of the exist system and the new system. For the stability analysis of them, the utility program, SAP2000, was used. And, a semi-auto program on the design system of the new soundproof wall using green stone was developed, which can be easily use because of the simplification.

• Journal of the Ergonomics Society of Korea
• /
• v.24 no.2
• /
• pp.85-91
• /
• 2005

To understand the basic relationship between 3D curved surface model and 2D pattern, simplified torso model was generated by commercial CAD program (IDEAS). 3D torso model was then divided into different blocks and unfolded into a flat pattern as in ordinary works of clothing item design. As results, 2D pattern development of different part of 3D torso model was attempted and analyzed mathematically. It was found that different height, radius and tangent slope of 3D blocks resulted in different 2D pattern. The relationships between the shape parameters of 3D torso blocks and those of 2D patterns were analyzed using regression equations. Direct way of drawing a 2D pattern of corresponding 3D torso block was also illustrated for the convenience of pattern making using conventional measurements of upper/ lower radii and height of 3D torso block.

• International Journal of Contents
• /
• v.11 no.4
• /
• pp.77-85
• /
• 2015

Table detection is a challenging problem and plays an important role in document layout analysis. In this paper, we propose an effective method to identify the table region from document images. First, the regions of interest (ROIs) are recognized as the table candidates. In each ROI, we locate text components and extract text blocks. After that, we check all text blocks to determine if they are arranged horizontally or vertically and compare the height of each text block with the average height. If the text blocks satisfy a series of rules, the ROI is regarded as a table. Experiments on the ICDAR 2013 dataset show that the results obtained are very encouraging. This proves the effectiveness and superiority of our proposed method.