• Macromolecular Research
• /
• v.17 no.6
• /
• pp.365-377
• /
• 2009

In this feature article, we briefly review the new methods we have utilized recently in the investigation of morphology and phase behavior of block copolymers. We first describe the chromatographic fractionation method to purify block copolymers from their side products of mainly homopolymers or block copolymer precursors inadvertently terminated upon addition of the next monomer in the sequential anionic polymerization. The chromatographic method is extended to the fractionation of the individual block of diblock copolymers which can yield the diblock copolymer fractions of different composition and molecular weight, which also have narrower distributions in both molecular weight and composition. A more detailed phase diagram could be constructed from the set of block copolymer fractions without the need of acquiring many block copolymers each prepared by anionic polymerization. The fractions with narrow distribution in both molecular weight and composition exhibit better long-range ordering and sharper phase transition. Next, epitaxial relationships between two ordered structures in block copolymer thin film is discussed. We employed the direct visualization method, transmission electron microtomography(TEMT) to scrutinize the grain boundary structure.

• Macromolecular Research
• /
• v.10 no.2
• /
• pp.85-90
• /
• 2002

Poly (ethylene oxide)/polylatide/poly(ethylene oxide) (PEO/PL/PEO) tri-block copolymers, which each block is connected by ester bond, were synthesized by coupling reaction of PL with PEO in the presence of pyridine. PL/PEO/PL tri-block copolymer was synthesized by ring opening polymerization of L-lactide initiated by PEO in the presence of stannous octoate. Degradation behavior of the copolymers was investigated in a pH 7.4 phosphate buffer saline (PBS) at 37$\pm$1 $^{\circ}C$. Gel permeation chromatography (GPC) and $^1$H-nuclear magnetic resonance (NMR) were used to monitor the change of mass loss, molecular weight and composition of copolymers. In hydrolytic degradation, the PEO/PL/PEO tri-block copolymer with high PEO contents affected the increase of its mass loss, and resulted in the decrease of its molecular weight as well as PEO composition. However, when PL/PEO/PL and PEO/PL/PEO tri-block copolymers had similar PEO contents, PEO/PL/PEO decreased faster in molecular weight and PEO composition than PL/PEO/PL.

• Fibers and Polymers
• /
• v.4 no.1
• /
• pp.15-19
• /
• 2003

The self-assembly of asymmetric ABC triblock copolymers in the ordered structure is investigated using an isothermal-isobaric molecular dynamics simulation. Unlike symmetric A BC triblock copolymers, more fascinating mophologies are observed in asymmetric ones because of a larger difference of incompatibility between the components. Various modes of self-assembly in assymmetric ABC triblock copolymers are also observed depending on the block composition. When the composition of block A Is changed from 0.125: to 0.25 at the same $f_B$ : 0.25, the morphological transition from the “cylinder in cylinder” to “cylinders at cylinder” structure is observed in the simulation. In the case of ABC triblocks with $f_B$=0.5, a lamellar-type structure is changed to a cylinder-type structure with increasing the length of block A. When the midblock length increases further to $f_B$=0.625, the “spheres on cylinder” structure is observed in both the $A_{10}$$B_{50}$$C_{20}$ and $A_{20}$$B_{50}$$C_{10}$ triblocks. From these results, the phase diagram of ABC triblock copolymers can be constructed.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.101-101
• /
• 2006

We have studied the micellisation of poly(n-butyl acrylate)-block-poly(acrylic acid) and poly(n-butyl acrylate)-graft-poly(acrylic acid) in aqueous solution. The size and structure of the formed micelles was elucidated by scattering and imaging techniques. The micelle structure depends on pH, composition, and topology: graft copolymers form much smaller micelles that block copolymers of similar composition. We have also synthesized block copolymers of acrylic acid and N-isopropylacrylamide (NIPAAm) or N,N-diethylacrylamide (DEAAm). Due to the LCST of polyNIPAAm and polyDEAAm, these block copolymers spontaneously form micelles upon heating and they form inverse micelles upon decreasing pH below 4. If the LCST block is much longer than the PAA one, this presents a very convenient way to prepare crew-cut micelles. The polymers have been successfully used as stabilizers in emulsion polymerization. They also have been conjugated to streptavidin. The conjugates reversibly form mesoscopic particles on heating.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.363-367
• /
• 2009

We propose Cubical User Interface(CUI) for toy block composition in Augmented Reality. The creation of new object by composing virtual object is able to construct various AR contents effectively. However, existing GUI method requires learning time or is lacking of intuitiveness between act of user and offered interface. In case of AR interfaces, they mainly have been supported one handed operation and it did not consider composition property well. Therefore, the CUI provide tangible cube as the manipulation tool for virtual toy block composition in AR. The tangible cube which is attached multi-markers, magnets, and buttons supports free rotation, combination, and button input. Also, we propose two kinds of two-handed composing interactions based on CUI. First is Screw Driving(SD) method which is possible to free 3-D positioning and second is Block Assembly(BA) method which support visual guidance and is fast and intuitive. We expected that proposed interface can apply as the authoring system for content such as education, entertainment, Digilogbook.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.13 no.2
• /
• pp.45-52
• /
• 2007

Hospital Architectures in Korea are continuously erected to old-fashioned design, such as a large self-sufficient, but cost-inefficient hospital, in spite of rapidly changing social and healthcare environment. However, changes are slowly coming from inside of itself. This paper analyzed block plans of 7 best Korean hospitals which constructed in recent 20 years in aspects of the purpose of erection, departmental composition, areal composition, mass design and functional zoning of block plans and then, presented the directions of new design trends of hospital architecture in Korea. It is anticipated that hospital architecture will change immensely in the enlarging process of these minor changes.

• Korean Institute of Interior Design Journal
• /
• no.41
• /
• pp.112-120
• /
• 2003

The purpose of this study is to review the plan composition characteristics of the super high-rise apartment. 20 cases were selected in Seoul and Kyunggi area that were planned or constructed since 1999, and 10 unit plans were analyzed to review such design characteristics as block type & entry access type, plane figure, opening layout, area distribution and spice composition of unit plan. The result of the study shows that the super high-rise apartment has more variant block types and plane figures compare with the conventional high-rise apartment, and it also has several design characteristics in plane composition such as the increase of the number of the walls with openings, the weakening of the spatial centralization of a living room and the dispersion of rooms with the increase of connection by corridors.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.6
• /
• pp.492-498
• /
• 1984

We have reported the seasonal and portional variation in the composition of uronic acid of alginic acid from Ecklonia cava in the previous study. In the present paper, uronic acid block structure of alginic acid from Ecklonia cave was investigated, and some related properties such as viscosity, the dependence on temperature and substitution of metallic ion were also discussed. The proportion M block was highest amnog three blocks in both of frond and stipe. The average values of M and G block ratios were $51.6|%\;and\;32.3\%$ in the frond, whereas $45.7\%\;and\;38.6\%$ in the stipe, respectively. The proportions of alternating blocks in the frond and stipe were similar, and the values were $16.1\%$ in the frond and $15.6\%$ in the stipe. The viscosity of $1\%$ sodium alginate solution was almost inversely proportional to the M/G and/or M block ratio. Viscosities were marked maximum from summer to autumn and minimum winter to spring. In the value of lower M/G and M block ratio, the viscosity seemed to have a considerable dependence on temperature. The temperature dependence was more appearant in the alginic acid from the frond (M/G ratio, 0.95; M block, $54.2\%$) collected in July and the stipe (M/G ratio, 1.61; M block $47.6\%$) in April. The affinity with metallic ion appeared higher in order of $Pb^{2+}>Cu^{2+}>Co^{2+}>Zn^{2+}$. The amounts of metallic ion exchange of the $Pb^{2+},\;Cu^{2+},\;Co^{2+}\;and\;Zn^{2+}$ were ranged from 3.4. to 4.7, 2.5 to 3.2, 1.8 to 2.2 and 1.6 to 1.7 meq/(g. sodium alginate), respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.6
• /
• pp.901-903
• /
• 1999

Twenty-four multiparous crossbred Friesian dairy cows (60-90 days in lactation) were randomly assigned into a $2{\times}2$ factorial arrangement in a randomized complete block design. Factors were two levels of concentrate supplementation (1:2, high vs 1:1.2, very high; concentrate:milk yield) and two levels of high-quality feed block (HQFB) supplementation (non vs ad libitum block licking). Ruzi grass (Brachiaria ruziziensis) was fed as a roughage throughout the 70 day feeding trial. High level of concentrate fed group resulted in higher roughage and HQFB intakes, compared with very high concentrate supplemented group. HQFB supplementation tended to increase roughage intake and significantly improved milk yield (2 kg/hd/d in high concentrate supplementation) and quality (% fat) which resulted in higher economical return. HQFB was recommended to be used as a strategic supplement in lactating dairy cows especially when fed on low-quality roughages or crop residues.

• Journal of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.203-210
• /
• 1990

As a possible biocompatible and biodegrable polymer skeleton for drug delivery system, block copolymers of L-lactic acid and L-glutamic acid with different composition were synthesized and characterized. Poly (L-lactide) was prepared by polymerization of L-lactide with zine oxide at $130^{\circ}C$ for 72 hrs. 3-Amino-l-propanol was introduced to poly (L-lactide) by an ester linkage in order to initiate polymerization. Polymerization of $\gamma-benzyl-L-glutamate-N-carboxyanhydride(\gamma-BLG-NCA)$ utiliizing the amino group of modified poly (L-lactide) as an initiator gave rise to the block copoly $(L-lactide-\gamma-benzyl-L-glutamate).$ The NMR study of resulting block copolymers showed that the composition of L-lactic acid and $\gamma-benzyl-L-glutamate$ in block copolymers was depended on the weight ratio of poly (L-lactide) and $\gamma-BLG-NCA.$ The thermal properties of the resulting block copolymers were determined by the differential scanning calorimetry and by the thermogravimetry.