• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.947-950
• /
• 2015

In the cause of car accidents in Korea, drowsy driving has shown that it is larger fctors than drunk driving. Therefore, in order to prevent drowsy driving accidents, drowsiness detection and warning system for drivers has recently become a very important issue. Furthermore, Many researches have been published that measuring alpha wave of EEG signals is the effective way in order to be aware of drowsiness of drivers. In this study, we have developed EEG measuring device that applies a signal processing algorithm using the LabView program for detecting drowsiness. According to results of drowsiness inducement experiments for small test subjects, it was able to detect the pattern of EEG, which means drowsy state based on the changing of power spectrum, counterpart of alpha wave. After all, Comparing to the results of drowsiness pattern between commercial equipments and developed device, we could confirm acquiring similar pattern to drowsiness pattern. With this results, the driver's drowsiness prevention system expect that it will be able to contribute to lowering the death rate caused by drowsy driving accidents.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.4
• /
• pp.1-9
• /
• 2012

LCD(Liquid Crystal Display) commonly used as an output device has a drawback of slow response time compared with CRT display. This drawback causes motion blur especially when an abrupt intensity change occurs in an image sequence as time goes on. To overcome the problem of slow response time overdriving technique has been used in TCON of LCD. In this technique, the previous frame data has to be compressed and stored in an external memory. Considering both chip size of TCON and computational complexity, AM-BTC has been applied to the 8bit HD display driver. However, the conventional method is not suitable for 10 bit Full HD because 10 bit Full HD data is much larger than that of 8 bit HD data. Being applied to 10 bit Full HD display driver, the conventional method increase cost by enlarging the external memory size of TCON or deteriorates image quality. In this paper, we propose dual BTC image coding technique for Full HD display driver that is an adaptive coding scheme according to morphological information of each sample block. Through experiments, it is verified that the proposed Dual BTC method performs better than the conventional method not only quantitatively but also qualitatively.

• The KIPS Transactions:PartA
• /
• v.13A no.6 s.103
• /
• pp.517-524
• /
• 2006

In cluster computers, it is essential to Implement the single I/O space(SIOS) supporting integrated I/O substructure to efficiently process I/O intensive applications. SIOS service provides with global I/O address space to directly access peripherals and hard disks in its own or remote nodes from any node in the cluster computer In this thesis, we propose the implementation method of SIOS in Linux clusters by using only freewares. This method is implemented at device driver level that uses Enhanced Network Block Device(ENBD) and file system level that uses S/W RAID and NFS. The major strengths of this method are easiness of implementation and almost no cost due to using freewares. In addition, since freewares used are open sources, it is possible to apply this method to other platforms with only slight modification. Moreover, experiments show that I/O throughputs are up to 5.5 times higher in write operations and approximately 2.3 times higher in read operations than those of CDD method that uses the device driver developed at kernel level.

• The KIPS Transactions:PartA
• /
• v.9A no.4
• /
• pp.451-458
• /
• 2002

In this article, we present, design, and implement a software and hardware for an embedded RAID system. The merits and drawbacks of our system are presented by performance evaluation. The proposed hardware system consists of three fibre channel controllers for the interface with fibre channel disks and hosts. Embedded Linux in which a RAID software is implemented is ported to the hardware. A SCSI target mode device driver and a target mode SCSI module are designed for that our RAID system is considered as a block device to a host computer. Linux Multi-device is used as RAID functions of this system. A data cache module is implemented for high performance and the interconnection between Linux Multi-device and the target mode SCSI module. The RAID 5 module of Multi-device is modified for improvement of read performance. The benchmark shows that the new RAID 5 module is superior to the original one in overall performance.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.6
• /
• pp.635-645
• /
• 2003

One of very important features that are necessarily supported by clustered parallel computer systems is a single I/O system image in which users can access both the local and remote I/O resources transparently. In this paper, we propose an efficient disk sharing technique supporting a single disk I/O system image architecture. The design separates the I/O subsystem of a cluster into the file system and a set of virtual hard disk drivers. The virtual hard disk driver deals with a hard disk in the remote node as a local hard disk. All services provided by it are performed in the device driver level without any modification of file systems. Users can, therefore, access all the disks in the cluster regardless of their locations. Our virtual hard disk driver is implemented under the linux, and also tested in a linux cluster system. We find by experiments that it can successfully support a single disk I/O space, and at the same time it shows better performance than NFS. We are sure that this paper can be a guideline for single I/O space of other devices to be easily constructed.

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.135-138
• /
• 2001

This paper presents micro step driving method using VHDL(Very high speed integrated circuit Hardware Description Language) which can configure CPLD(Complex Programmable Logic Device). Using VHDL which can do abstractive programming is similar to high level language. The whole block divided into five parts with freq. divide part, saw-tooth wave generation part, sine-cosine wave generation part, comparative part, out part. In the result of this study, peripheral circuits are to be simple and using LPM(Library of Parameterized Modules) is more easily to configure circuit. It is easy to verify and implement by using VHDL. To subdivide one natural step, we confirm that using micro step driver is expected that the rotor motion is stepless very smooth.

• Journal of IKEEE
• /
• v.19 no.2
• /
• pp.168-175
• /
• 2015

In this paper, we propose FPGA design technique for rotating LED display device which is capable of displaying videos with the use of the afterimage effect. The proposed technique is made up of image data correction process based on inverse gamma correction and error diffusion, block interleaving process, and data serial output process. The data correction process based on inverse gamma correction and error diffusion is an image data correction step in which image data received are corrected by inverse gamma correction process to convert the data into linear brightness characteristics, and by error diffusion process to reduce the brightness reduction phenomenon in low-gray-level which is caused by inverse gamma correction. In the block interleaving process, the data of the frames entered transversely are first saved in accordance with entrance order, and then only the longitudinal image data are read. The data serial output process is applied to convert the parallel data in a rotating location into serial data and send them to LED Driver IC, in order to send data which will be displayed on high-speedy rotating LED Bar. To evaluate the accuracy of the proposed FPGA design technique, this paper used XC6SLX45-FG484, a Spartan 6 family of Xilinx, as FPGA, and ISE 14.5 as a design tool. According to the evaluation analysis, it was found that goal values were consistent with simulation values in terms of accurate operation of inverse gamma and error diffusion correction, block interleaving operation, and serialized operation of image data.

• Journal of Korea Multimedia Society
• /
• v.10 no.1
• /
• pp.74-82
• /
• 2007

IPv6 is the internet protocol for next generation which can solve the problem of IPv4 protocol. Mobile IPv6 efficiently provides the mobility for mobile devices holding the properties of IPv6. iSCSI(Internet Small Computer System Interface) is a block-oriented storage access protocol that enables a user to recognize a remote storage as their own local block device through general TCP/IP networks. Since iSCSI uses a standard Ethernet switch and router for this kind of access, it can not only be applized to Ethernet technologies, but can also be used to create a storage networking system without any distance restrictions that can equally be applied to a wireless network environment. Accordingly, this paper presents an alternative approach to overcome the limited storage space of mobile devices based on the IPv6 iSCSI initiator driver which was originally designed for wired networks. Also, this paper describes about the implementation and performance analysis of mobile education service system using virtual storage devices in IPv6 wireless networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6A
• /
• pp.517-525
• /
• 2005

iSCSI(Internet Small Computer System Interface) is a block-oriented storage access protocol that enables a user to recognize a remote storage as their own local block device through general TCP/IP networks. Since iSCSI uses a standard ethernet switch and router for this kind of access, it can not only be applied to ethernet technologies, but can also be used to create a storage networking system without any distance restrictions that can equally be applied to a wireless network environment. Accordingly, focusing on this applicability, this paper presents an alternative approach to overcome the limited storage space of mobile devices based on the iSCSI initiator driver, which was originally designed for wired networks. Additionally, its potential with a wireless network is also evaluated.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.330-334
• /
• 2017

Container-based virtualization reduces performance overhead compared with other virtualization technologies and guarantees an isolation of each virtual execution environment. So, it is being studied to block access to host resources or container resources for sandboxing in restricted system resource like embedded devices. However, because security threats which are caused by security vulnerabilities of the host OS or the security issues of the host environment exist, the needs of the technology to prevent an illegal accesses and unauthorized behaviors by malware has to be increased. In this paper, we define additional access permissions to access a virtual execution environment newly and control them in kernel space to protect attacks from illegal access and unauthorized behaviors by malware and suggest the Container Access Control to control them. Also, we suggest a way to block a loading of unauthenticated kernel driver to disable the Container Access Control running in host OS by malware. We implement and verify proposed technologies on Linux Kernel.