• 제목/요약/키워드: Blast source

검색결과 100건 처리시간 0.031초

DEVELOPMENT OF SUSTAINABLE CEMENTLESS MORTARS

  • Keun-Hyeok Yang;Seol Lee;Sang-Ho Nam
    • 국제학술발표논문집
    • /
    • The 3th International Conference on Construction Engineering and Project Management
    • /
    • pp.1630-1636
    • /
    • 2009
  • Nine alkali-activated (AA) mortars were mixed and cured at water or air-dried conditions to explore the significance and limitation for the application of the combination of Ba and Ca ions as an alkali-activator. Ground granulated blast-furnace slag (GGBS) was used for source materials, and calcium hydroxide (Ca(OH)2) and barium hydroxide (Ba(OH)2) were employed as alkali activators. Test results clearly showed that the water curing condition was more effective than the air-dried curing condition for the formation of the denser calcium silicate hydrate (C-S-H) gels that had a higher molar Si/Ca ratio, resulting in a higher strength development. At the same time, the introduction of Ba(OH)2 led to the formation of 2CaO·Al2O3·SiO2·8H2O (C2ASH8) hydrates with higher molar Si/Al and Ca/Al ratios. Based on the test results, it can be concluded that the developed cementless mortars have highly effective performance and high potential as an eco-friendly sustainable building material.

  • PDF

내부 폭발에 의한 함정의 손상 예측 (Prediction of Damage Extents due to In-Compartment Explosions in Naval Ships)

  • 장원준;정준모
    • 대한조선학회논문집
    • /
    • 제61권1호
    • /
    • pp.44-50
    • /
    • 2024
  • In order to reasonably predict damage extents of naval ships under in-compartment explosion (INCEX) loads, two conditions should be fulfilled in terms of accurate INCEX load generation and fracture estimation. This paper seeks to predict damage extents of various naval ships by applying the CONWEP model to generate INCEX loads, combined with the Hosford-Coulomb (HC) and localized necking (LN) fracture model. This study selected a naval ship with a 2,000-ton displacement, using associated specifications collected from references. The CONWEP model that is embedded in a commercial finite element analysis software ABAQUS/Explicit was used for INCEX load generation. The combined HC-LN model was used to simulate fracture initiation and propagation. The permanent failures with some structural fractures occurred where at the locations closest to the explosion source points in case of the near field explosions, while, some significant fractures were observed in way of the interfaces between bulkheads and curtain plates under far field explosion. A large thickness difference would lead to those interface failures. It is expected that the findings of this study enhances the vulnerability design of naval ships, enabling more accurate predictions of damage extents under INCEX loads.

철강 산업의 산업공정부문 CO2 실측 배출계수 산정에 관한 연구 (An Estimation of Plant Specific Emission Factors for CO2 in Iron and Steel Industry)

  • 엄윤성;홍지형;김정수;김대곤;이수빈;송형도;이성호
    • 한국대기환경학회지
    • /
    • 제23권1호
    • /
    • pp.50-63
    • /
    • 2007
  • The development of domestic plant specific emission factors is very important to estimate reliable national emissions management. This study, for the reason, was carried out to obtain advances emission factor for Carbon Dioxide ($CO_2$) by source-specific emission tests from the iron and steel industry sector which is well known as one of the major sources of greenhouse gases ($CO_2$). Emission factors estimated in this study were compared with those of IPCC for evaluation and they were found to be of similar level in the case of $CO_2$. There was no good information available on $CO_2$ plant specific emission factors from the iron and steel industry in Korea so far. The major emission sources of $CO_2$ examined from the iron and steel manufacturing precesses were a hot blast stove, coke oven, sintering furnace, electric arc furnace, heating furnace, and so on. In this study, the concentration of $CO_2$ from the hot blast stove process was the highest among all processes. The $CO_2$ emission factors for a ton of Steel and Iron products (using B-C oil) were estimated to be 0.315 $CO_2$ tonne (by Tier 3 method) and 4.89 $CO_2$ tonne. In addition, emission factor of $CO_2$ for heating furnace process was the highest among all process. Emission factors estimated in this study were compared with those of IPCC for evaluation and they were found to be of similar level in the case of $CO_2$.

한국·중국 벼 도열병균 생리형 분석 및 품종 저항성 특성 비교 (Comparative Assay Fungus Population and Resistant Genes about Magnaporthe grisea between Korea and China)

  • 김동윤;심홍식;;;한성숙
    • 식물병연구
    • /
    • 제10권4호
    • /
    • pp.217-226
    • /
    • 2004
  • 한 중 벼 도열병균의 특성 검정과 저항성원의 공동 평가를 통하여 병원균의 특성을 구명하고 주요 저항성원에 대한 정보와 한국 도열병균의 분화 현상이 중국으로부터 유래하였는지를 분석하였다. 각국의 대표균주 각각 100균주씩을 한국, 중국 판별품종 및 단인자 저항성 품종에 접종한 결과, 한국 병원균은 중국 단인자 저항성 품종에서 29개의 반응형을 보였으며, 한국균주 46%가 중국 NIL(LTH/일본품종 저항성 유전자)을 모두 침해하여, 우리나라 벼 육종 시 저항성원으로 적합지 않은 것으로 나타났다. 또한 한국판별품종에 대한 중국균주의 반응결과, KJ-201, KJ-301, KJ-403, KJ-105, KJ-101 레이스가 각각 11%, 10%, 9% , 8%, 7%의 비율로 나타났다. 그러나 RFLP-MGR586 profile은 한국 균주가 중국균주보다 band 수와 양상이 다양하여 변이가 심한 것으로 나타났으며, IRRI에서 육성한 11개의 단인자 저항성 품종에 대하여 한-중균주의 유전자 침해비율은 대체로 비슷한 경향이었다. Pi-z, Pi-3, Pi-5(t)는 한국 균주가 각각 56.6%, 58.1%, 45.4%침해하는 반면, 중국 균주는 각각 85.2%, 75.9%, 75.9%를 침해하여 중국 균주의 침해 비율이 높았고 Pi-b 유전자의 경우, 한국 균주의 82.6%가 침해하는 반면 중국 균주는 59.3%가 침해하여 한국 균주의 침해 비율이 높았다.

혼합된 나트륨계열 활성화제에 의한 고로슬래그 기반 모르타르의 강도발현 특성 (Strength Development of Blended Sodium Alkali-Activated Ground Granulated Blast-Furnace Slag (GGBS) Mortar)

  • 김건우;김병조;양근혁;송진규
    • 콘크리트학회논문집
    • /
    • 제24권2호
    • /
    • pp.137-145
    • /
    • 2012
  • 이 연구는 수산화나트륨과 탄산나트륨이 혼합된 알칼리 활성화제에 의한 고로슬래그 모르타르의 강도발현 특성을 파악하기 위한 연구이다. 주요 변수는 활성화제의 첨가량, 물-바인더비(W/B) 그리고 골재-바인더비(S/A)이다. 활성화제의 첨가량에 따른 강도 특성을 수산화나트륨 3%, 4% 및 탄산나트륨 4%~8%까지 조절하여 측정하였다. 물-바인더비는 0.45~0.60까지 그리고 골재-바이더비는 2.05~2.85의 범위 내에서 변화하며 측정하였다. 원재료의 주요 성분 및 수산화나트륨, 탄산나트륨에 포함된 산화나트륨($Na_2O$) 양에 따라 조합된 알칼리 품질계수($Q_A$)를 산정하고, 이를 적용하여 알칼리 활성 모르타르의 28일 압축강도 예측식을 제안하였다. 각 변수에 따른 시험값과 제안된 예측식을 통한 결과값은 오차범위 5% 이내의 범위에서 만족하는 것으로 나타났다.

SNPchaser : DNA서열의 SNPs 치환 및 Heterozygosity 확인 프로그램 (SNPchaser : A Web-based Program for Detecting SNPs Substitution and Heterozygosity Existence)

  • 장진우;이현철;이명훈;최연식;추동원;박기정;이대상
    • KSBB Journal
    • /
    • 제24권4호
    • /
    • pp.410-414
    • /
    • 2009
  • 단염기 다양성 (Single-Nucleotide Polymorphisms, SNPs)은 핵산수준에서의 개개인의 유전 서열간의 차이를 나타내는 말로 최근 맞춤의약 분야에서 각광 받고 있다. 일반적으로 SNPs존재 유무를 확인하는데 주로 사용되는 방법은 ABI automated DNA sequencer와 같은 대용량 염기서열 결정 기계에서 산출되는 결과물 파일로부터 DNA서열을 추출하여 BLAST와 같은 상동성 검색을 수행하는 것이다. 본 논문에서는 사용자로부터 참조서열, AB1파일, SNPs 존재 가능성을 가진 염기의 위치 정보를 입력 값으로 받아 해당 위치에 존재하는 염기의 SNPs 치환 및 heterozygosity 여부를 확인 할 수 있는 프로그램인 SNPchaser를 개발하였다. 특정 유전자 서열 내에서 SNPs를 보이는 염기의 위치에 대한 정보를 사용자가 알고 있는 경우, 전체 유전자 서열에 대해 SNPs유무를 조사할 필요 없이 SNPs를 보인다고 보고된 위치의 염기를 조사하여 SNPs유무를 판단하고, 해당지역의 염기의 chromatogram정보를 사용자에게 제공하는 기능을 가지고 있다. 또한 SNPchaser는 사람과 같은 2배체의 염색체를 가진 생명체에 존재 하는 SNPs지역의 염기에 대한 heterozygosity여부를 사용자가 손쉽게 판별할 수 있도록 하였다. 본 논문에서 개발한 SNPchaser는 http://www.bioinformatics.ac.kr/SNPchaser에서 사용 가능하다.

종자소독의 현황과 문제점 (Present Status and Problems of Chemical Seed Treatment of Seedborne Diseases)

  • 이두형
    • 한국응용곤충학회지
    • /
    • 제22권2호
    • /
    • pp.130-137
    • /
    • 1983
  • A wide variety of pathogens are known io be seedborne, carried either as infectious mycelium internally or as contaminants on the seed coat. When seed is infected with a pathogen, the seed nay be rendered nonviable or it may remain viable but produce weak seedling. In some cases, the Infected seedling nay not be severely weakened, but nay serve as a source of primary inoculum within a community of plants. A recent problem nay be the dissemination of seedborne pathogens occurring as a result of the massive movements of seed, as a part of the 'Green revolution' Disease of great danger to agriculture may be introduced with seed from other parts of world. Seed treatment with organic mercury compounds in liquid form had become popular since about 1955. Organic mercury compounds contributed considerably to the increase in production of many crops and vegetables. In 1975, however, the use of organic mercury compound was forbidden because of doubts regarding their residual mammalian toxicity in agricultural products. Benomyl-thiram mixture, thiophanate methyl-;hiram mixture and TCMB have now been registered as seed disinfectants for the use of rice blast, brown spot and Bakanae disease. Oxathiinsthiram mixture has been registered as seed disinfectant for barley and wheat loose smut and leaf stripe of barley. Agricultural techniques have made such rapid progress that the nursery methods changed from the use of paddy nursery to box nursery designed for machine-transplanting. The spread of rice transplanting machines has caused increase of seedborne diseases. Among seedborne diseases, Bakanae disease has remarkably increased and causes much damage recently. In order to counter this trend, seed disinfectants must also be diversified. First, effective non-selective disinfectants need to be developed, and second, appropriate control methods always need to be prepared in parallel with the development of new techniques for cultivation.

  • PDF

염기도가 알칼리 활성고로슬래그 모르타르의 탄산화에 미치는 영향 (Effects of Basicity on the Carbonation Characteristics of Alkali-Activated Slag Mortar)

  • 송금일;이방연;홍건호;공민호;송진규
    • 콘크리트학회논문집
    • /
    • 제24권5호
    • /
    • pp.577-584
    • /
    • 2012
  • 알칼리 활성슬래그(AAS)는 $CO_2$ 배출 부하가 큰 보통포틀랜드시멘트(OPC)의 가장 확실한 대체 재료로써 구조재로 이용하기 위해서는 내구성 평가 및 검증이 필요하다. 내구성 평가지표의 큰 비중을 차지하고 있는 것이 탄산화저항성인데, 알칼리 활성슬래그는 낮은 칼슘 함유량 때문에 OPC보다 탄산화 저항성이 약한 것으로 알려져 있다. 이 연구에서는 알칼리 활성슬래그의 모재료인 고로슬래그의 염기도(CaO/$SiO_2$)를 메카노-케미컬 합성법에 의해 조정하고, 조정된 염기도에 따라 수화생성물의 구성변화와 탄산화 전 후의 물리적 특성이 어떻게 변하는지 살펴보았다. 실험 결과 염기도가 높을수록 강도 증가와 탄산화 저항성이 향상되고, 탄산화 후 강도 저하가 개선되었다.

산업부산물을 활용한 제철·제강용 합성 칼슘 페라이트 특성 - (1) (The Properties of Synthetic Calcium Ferrite for Ironmaking and Steelmaking using Industrial By-products - (1))

  • 박수현;추용식;서성관;박재완
    • 자원리싸이클링
    • /
    • 제23권5호
    • /
    • pp.3-11
    • /
    • 2014
  • 칼슘 페라이트는 기존 소결광용 결합제 및 제강용 융제보다 용융온도가 낮아 결합제 및 융제로서의 효과가 우수하다. 본 연구에서는 제조비용절감과 생산성 증대를 위해 기존 용융법이 아닌 시멘트 제조공정에서의 소성법으로 칼슘 페라이트를 제조하였다. 칼슘페라이트의 석회질 원료로 소성슬러지 및 석회석을 사용하였고, 철질 원료로 제강슬러지, 고로분진 및 철광석을 사용하였다. 이때 소성온도는 $950{\sim}1170^{\circ}C$이며, 저융점 특성을 가진 '소결광용 결합제' 또는 '전로 및 전기로용 융제'로의 사용 가능성을 검토하고자 원료를 분석하고 소결 특성을 평가하였다.

Genomic Analysis of Dairy Starter Culture Streptococcus thermophilus MTCC 5461

  • Prajapati, Jashbhai B.;Nathani, Neelam M.;Patel, Amrutlal K.;Senan, Suja;Joshi, Chaitanya G.
    • Journal of Microbiology and Biotechnology
    • /
    • 제23권4호
    • /
    • pp.459-466
    • /
    • 2013
  • The lactic acid bacterium Streptococcus thermophilus is widely used as a starter culture for the production of dairy products. Whole-genome sequencing is expected to utilize the genetic basis behind the metabolic functioning of lactic acid bacterium (LAB), for development of their use in biotechnological and probiotic applications. We sequenced the whole genome of Streptococcus thermophilus MTCC 5461, the strain isolated from a curd source, by 454 GS-FLX titanium and Ion Torrent PGM. We performed comparative genome analysis using the local BLAST and RDP for 16S rDNA comparison and by the RAST server for functional comparison against the published genome sequence of Streptococcus thermophilus CNRZ 1066. The whole genome size of S. thermophilus MTCC 5461 is of 1.73Mb size with a GC content of 39.3%. Streptococcal virulence-related genes are either inactivated or absent in the strain. The genome possesses coding sequences for features important for a probiotic organism such as adhesion, acid tolerance, bacteriocin production, and lactose utilization, which was found to be conserved among the strains MTCC 5461 and CNRZ 1066. Biochemical analysis revealed the utilization of 17 sugars by the bacterium, where the presence of genes encoding enzymes involved in metabolism for 16 of these 17 sugars were confirmed in the genome. This study supports the facts that the strain MTCC 5461 is nonpathogenic and harbors essential features that can be exploited for its probiotic potential.