• 한국정밀공학회지
• /
• 제17권3호
• /
• pp.149-157
• /
• 2000

Tool wear in the shearing process such as blanking, piercing and trimming is very important, because it has great effects on the dimensional accuracy, working efficiency and economy. Most of tools in the shearing process have the coated layer at surface fur good wear and corrosion resistance. When the surface of tool is teated, the wear Phenomena of coated surface layer and inner layer may be different. This paper describes a computer modelling technique by the finite element method in order to investigate the wear mechanism and to predict the wear profile of Ti-N coated tool in piercing process according to the volume of Production. Wear coefficients of the coated layer and inner layer are obtained through Pin-on-Disk wear test, respectively. To verify the effectiveness of the suggested technique, the technique is applied to wear analysis in piercing recess of piston pin and simulation results are compared with experimental ones.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1225-1226
• /
• 2013

• 한국기계가공학회지
• /
• 제21권8호
• /
• pp.93-98
• /
• 2022

Adiabatic blanking is a method to improve productivity through an autocatalytic cycle that occurs repeatedly through plastic deformation and thermal softening caused by impact energy. In this study, an axisymmetric analysis model comprising a punch, die, holder, and specimen was developed to confirm the temperature and deformation characteristics caused by an impact load. Through this, the impact energy, diameter of the punch, gap between the punch and die, and the effect of the fillet were analyzed. Because this process occurs in a very short time, adiabatic analysis can be performed using the explicit time-integration method. The analysis, confirmed that it is necessary to design a structure capable of increasing the local temperature and plastic deformation by controlling the impact energy, working area, gap, and the fillet.

• 한국산학기술학회논문지
• /
• 제14권12호
• /
• pp.6060-6065
• /
• 2013

유효 전단면의 크기를 최대가 되도록 하기 위해서는 다이 롤 높이의 최소화가 매우 중요하다. 본 연구에서는 V-링 압입량의 변화와 클리어런스의 변화에 대한 다이 롤 변화를 연구하였다. V-링 거리를 2mm로 고정하고 클리어런스가 다른 다이인서트를 적용할 수 있는 파인블랭킹 금형을 제작하여 전단해석과 실험을 진행하였다. 각 실험으로부터 시편을 채취하여 다이 롤 높이를 분석한 결과 V-링의 압력이 재료의 유동을 효과적으로 억제하고 펀치와 다이 사이의 클리어런스가 재료 두께에 대하여 1%의 경우가 다이 롤 높이가 낮게 됨을 알 수 있었다.

• 한국정밀공학회지
• /
• 제15권2호
• /
• pp.124-133
• /
• 1998

This paper describes a research work of developing a computer-aided design of blanking and piercing for irregular-shaped sheet metal products. An approach to the development of compact and practical CAB system is based on the knowledge-based rules. Knowledge for the CAD system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoLISP on the AutoCAD with a personal computer. Based on knowledge-based rules, the system, STRT-DES, is designed by considering several factors, such as complexities of blank geometry and punch profile, availability of press equipment and standard parts, utilization ratio which minimizes the scrap in a single or a pairwise operation, bridge width, grain orientation and design requirements which maximize the strength of the part when subsequent bending is involved. This system checks a forming feasibility with both internal and external features, a dimension of blanked hole, and a corner and a fillet radius for irregualrly shaped sheet metal products. Therefore this system can carry out a die design for each process which is obtained from results of an automated blank layout drawing with a best utilization ratio for irregular shape of product that was successful in production feasibility check module and those of an automated strip layout drawing and generate part drawings and the assembly drawing of die set in graphic forms.

• 한국정밀공학회지
• /
• 제15권3호
• /
• pp.18-23
• /
• 1998

This paper describes a research work of developing a computer-aided design of blanking and piercing for irregular-shaped sheet metal products. An approach to the CAD system is based on the knowledge-based rules. Knowledge for the CAD system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoLISP on the AutoCAD with a personal computer and is composed of four main modules, which are input and shape treatment, flat pattern layout, production feasibility check, and strip layout module. Based on knowledge-based rules, the system is designed by considering several factors, such as radius and angle of bend. material and thickness of product, complexities of blank geometry and punch profile, and availability of press. This system is capable of unfolding a formed sheet metal part to give flat pattern and automatically account for the adjustment of bend allowances to match tooling requirements by checking the dimensions and relationships of parts of the folded product. Also this system can carry out a process planning which is obtained from results of irregular shape of product that was successful in production feasibility check module according to flat pattern layout and generate strip layout drawing in graphic forms. The developed system provides its efficiency for flat pattern layout, and strip layout for the irregularly shaped sheet metal products.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권4호
• /
• pp.509-516
• /
• 2009

This paper is the study on improving the coefficient of utilization of material in deep drawing process. Cylindrical cup drawing process is widely used in sheet metal forming process. The blank shape is one of the important things in sheet metal forming process. It is produced for the bridge of blank in a blanking process. The coefficient of utilization of material is much effected by this bridge of blank. This study offered a new process method to reduce the loss of material. The new blank shape offered and manufactured by new process method is investigated by a finite element method and the experiment. Then the wrinkling, the punch load, the thickness distribution is observed. This result is different from the result of circular blank process. And it is got that the Max strain, the wrinkle and the height of the wrinkle are effected by the holding force and the punch load. As a result, if the processing optimum condition is found, the loss of material will be reduced. It is necessary to research systematically about determining the optimum value of process variables.

• 한국정밀공학회지
• /
• 제19권4호
• /
• pp.179-186
• /
• 2002

This paper is the study on improving the coefficient of utilization of material in deep drawing process. Cylindrical cup drawing process is widely used in sheet metal forming process. The blank shape is one of the important things in sheet metal forming process. It is produced for the bridge of blank in a blanking process. The coefficient of utilization of material is much effected by this bridge of blank. This study offered a new process method to reduce the loss of material. The new blank shape offered and manufactured by new process method is investigated by a finite element method and the experiment. Then the wrinkling, the punch load, the thickness distribution is observed. This result is different from the result of circular blank process. And it is got that the Max strain, the wrinkle and the height of the wrinkle are effected by the holding farce and the punch load. As a result. if the processing optimum condition is found, the loss of material will be reduced. It is necessary to research systematically about determining the optimum vague of process variables.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1299-1300
• /
• 2006

Floating p-well 전압 감지를 이용한 시간 지연 회로를 적용하여 punch-though형 절연 게이트 바이폴라 트랜지스터 (PT-IGBT)의 최적화된 보호 회로를 제안하였다. Floating P-well 축전기와 게이트 저항은 정상 스위칭 동작시 단락 회로 감지 동작 (false detection of fault)을 차단하며, floating p-well 전압은 단락회로 상황시 풀-다운 (pull-down) MOSFET의 문턱 전압 이상으로 상승되어 풀-다운 MOSFET을 턴-온(turn-on) 시킴으로서 IGBT의 게이트 전압을 감소시킨다. 이에 따라 IGBT의 컬렉터 전류는 자연스럽게 감소된다. 실험 결과를 통해, 단락회로 상황에서 최적화된 IGBT의 보호회로가 소프트-셧다운 (soft-shutdown) 특성을 보이는 것을 확인할 수 있다.

• 한국산학기술학회논문지
• /
• 제5권4호
• /
• pp.309-314
• /
• 2004

네일 파일(nail file)을 제조할 때 재료는 강판(두께 0.5㎜)을 사용하고 가공방법은 외형형상을 만들고 Φ 0.8-Φ 1.0㎜의 구멍을 약 300여개 뚫어 완성한다. 이들의 가공방법은 에칭(etching)에 의존하여 제조원가의 33%를 에칭비가 차지하고 있으므로 제조원가의 상승원인이 되고 에칭시 부식제(etching reagent)의 잔류도 환경 친화적이 못되며 재료가 강판이기 때문에 제품에 녹(rust)이 생기므로 이들의 문제점을 해결하고자 다음과 같이 연구개발을 수행하였다. 제품의 녹 방지를 할수 있는 적합한 재질 선택 방법을 고찰하고, 에칭 가공방법을 사용하지 않고 금형을 이용한 프레스 가공으로 교체하기 위하여 프레스 스탬핑시의 스트립 레이아웃(strip layout)기법을 연구개발하고, 금형 부품 중에서 작업 중 절손이 빈번한 보통의 표준펀치를 퀼형의 펀치로 개발 하므로써 프로그레시브 퍼퍼레이팅 금형(progressive perforating die)을 개발하게 되었다.