Browse > Article

A Study on Improving The Coefficient of Utilization of Material in Deep Drawing Process  

Lee, Kyung-Won (Dept.of Mechanical Engineering, Graduate School of Chonnam National Universityisy)
Ban, Jae-Sam (Dept.of Mechanical Engineering, Graduate School of Chonnam National Universityisy)
Park, Young-Jin (Dept.of Mechanical Engineering, Graduate School of Chonnam National Universityisy)
Cho, Kyu-Zong (Dept.of Automotive Engineering, Chonnam National University)
Publication Information
Journal of the Korean Society for Precision Engineering / v.19, no.4, 2002 , pp. 179-186 More about this Journal
Abstract
This paper is the study on improving the coefficient of utilization of material in deep drawing process. Cylindrical cup drawing process is widely used in sheet metal forming process. The blank shape is one of the important things in sheet metal forming process. It is produced for the bridge of blank in a blanking process. The coefficient of utilization of material is much effected by this bridge of blank. This study offered a new process method to reduce the loss of material. The new blank shape offered and manufactured by new process method is investigated by a finite element method and the experiment. Then the wrinkling, the punch load, the thickness distribution is observed. This result is different from the result of circular blank process. And it is got that the Max strain, the wrinkle and the height of the wrinkle are effected by the holding farce and the punch load. As a result. if the processing optimum condition is found, the loss of material will be reduced. It is necessary to research systematically about determining the optimum vague of process variables.
Keywords
Deep drawing; Finite Element Method; Blank; Bridge; Cylindrical Cup;
Citations & Related Records
Times Cited By KSCI : 5  (Citation Analysis)
연도 인용수 순위
1 배원병, 허병우, 김호윤, 이영석, '사각 컵 드로잉 공정에서의 최적 블랭크 형상 결정,' 한국정밀공학회지, 제15권, 제12호, pp. 68-71, 1998   과학기술학회마을
2 Hyunbo Shim, Kichan Son, Kwanghee Kim, 'Optimum blank shape design by sensitivity analysis,' Journal of Materials Processing Technology. 104, pp. 191-199, 2000   DOI   ScienceOn
3 이충호, 허훈, '박판금속 성형공정에서의 블랭크 설계 및 변형률 예측,' 대한기계학회논문집(A), 제20권, 제6호, pp. 1810-1818, 1996   과학기술학회마을
4 김상도, 박민호, 서대교, '유한요소법을 이용한 임의의 단면 ？드로잉 제품의 소재형상설계,' 한국소성가공학회지, 제4권, 제4호, pp. 302-321, 1995   과학기술학회마을
5 H. Gloeckl, K. Lange, 'Computer aided design of blanks for deep drawn irregular shaped components,' in: Proceedings of the 11th NAMRC, pp. 243-251, 1983
6 X. Chen, R. Sowerby, 'The development of ideal blank shapes by the method of plane stress characteristics,' Int. J. Mech. Sci. 2, pp. 159-166, 1992   DOI   ScienceOn
7 T. Kuwabara, W.H. Si, 'PC-based blank design system for deep drawing irregularly shaped prismatic shells with arbitrarily shaped flange,' J. Mater. Process. Technol. 63, pp. 89-94, 1997   DOI   ScienceOn
8 O. Barlat, J.L. Batoz, Y.Q. Guo, F. Mercier, H. Naceur, C. Knopf Lenoir, 'Optimum blank design of blank contours using the inverse approach and a mathematical programming technique,' in: Proceedings of the NUMISHEET'96, pp. 178-185, 1996
9 S.D. Kim, M.H. Park, S.J. Kim, D.G. Seo, 'Blank design and formability for non-circular deep drawing processes by the finite element method,' J. Mater. Process. Technol. 75, pp. 94-99, 1998   DOI   ScienceOn
10 심현보, 정완진, 양동열, '탄소성 유한요소법에 의한 박판성형 공정의 해석(II),' 대한기계학회논문집, 제14권, 제5호, pp. 1129-1137, 1990   과학기술학회마을
11 정동원, 양경부, 김광희, '원형컵 드로잉 공정에 미치는 영향인자에 관한 실험적 연구,' 한국소성가공학회지, 제8권, 제5호, pp. 449-453, 1999
12 심현보, 양동렬, '굽힘을 고려한 원형 및 정사각형컵 딥드로잉 공정의 탄소성 유한요소해석,' 대한기계학회논문집, 제8권, 제7호, pp. 1738-1750, 1994   과학기술학회마을
13 H. Iseki, R. Sowerby, 'Determination of the optimal blank shape when deep drawing nonaxisymmetric cups using a finite element method,' JSME Int. J. Ser. A 38(4), pp. 473-479, 1995
14 Z. Zhaotao, L. Bingwen, 'Determination of blank shapes for drawing irregular cups using an electrical analogue method,' Int. J. Mech. Sci. 28(8), pp. 499-503, 1986   DOI   ScienceOn